Views

Difference between revisions of "optiPoint 410/420 S FAQ"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
 
(59 intermediate revisions by 9 users not shown)
Line 1: Line 1:
<div class="breadcrumb">
+
{{Discontinued|en|Devices}}
{{up}} [[FAQ (de)|FAQ]] | {{en}} [[optiPoint 410/420 S FAQ]]
 
</div>
 
In dieser '''optiPoint 410/420 S FAQ''' finden Sie Antworten auf häufig gestellte Fragen zur Telefonfamilie [[optiPoint 410/420 S]], unterteilt in verschiedene Themenbereiche.
 
  
== Allgemein ==
 
  
==== Welche Dokumente gibt es zu den optiPoint-Telefonen und wo finde ich diese Dokumente? ====
+
In this '''optiPoint 410/420 S FAQ''' you will find answers to frequently asked questions on the [[optiPoint 410/420 S]] phone family, divided into various topics.
  
: Allen optiPoint Endgeräten liegt eine gedruckte, mehrsprachige Dokumentation bei, die einen schnellen Überblick über Inbetriebnahme und wichtige Bedienschritte gibt.
+
== General ==
  
: Umfangreiche Administrationsanleitungen für die Installation, den Betrieb und die Wartung, sowie ausführliche Bedienungsanleitungen für den Benutzer, werden Ihnen in elektronischer Form (größtenteils im PDF-Format) auf der [[optiPoint 410/420 S#Documentation|optiPoint 410/420 S-Übersichtsseite]] zur Verfügung gestellt. Diese Dokumente liefern Ihnen ebenso ausführliche Informationen zu Themen wie Geräte-Konfiguration, Netzwerkeinstellungen oder Anwendungen.
+
==== What documents are there for the optiPoint phones and where do I find them? ====
  
==== Wie erhalte ich einen Überblick über die Leistungsmerkmale der optiPoint 410/420 S-Telefone? ====
+
: All optiPoint phones are shipped with a printed document in multiple languages providing brief instruction regarding installation and operation.
  
: Einen schnellen Gesamtüberblick über die Leistungsmerkmale erhalten Sie über das entsprechende [[optiPoint 410/420 S#Datasheet|Datenblatt zu den optiPoint 410/420 S-Telefonen]], welches Sie auch alternativ unter ''http://www.siemens.de/hipath > Downloads > Datenblätter'' einsehen können.
+
: Comprehensive administration instructions on installation, operation, and maintenance as well as detailed operating instructions for the user are provided in electronic form (for the most part in PDF format) on the [[optiPoint 410/420 S#Documentation|optiPoint 410/420 S overview page]]. These documents also provide detailed information on topics such as device configuration, network settings, and applications.
: Ausführlichere Informationen zu den Leistungsmerkmalen der optiPoint 410/420 S-Telefone entnehmen Sie der [[optiPoint 410/420 S#Administration_Manuals|Administrationsanleitung]].
 
  
==== An wen kann ich mich wenden, um ein optiPoint-Telefon für Testzwecke anfordern? ====
+
==== How do I get an overview of the features of the optiPoint 410/420 S phones? ====
  
: In Deutschland wenden Sie sich bitte an unser ''Business Support Center'' ([mailto:geschaeftskundenvertrieb@unify.com geschaeftskundenvertrieb@unify.com]) oder nehmen Sie direkt mit einen der Siemens-Vertriebspartner Kontakt auf.
+
: You will get a quick overview of the features in the corresponding [[optiPoint 410/420 S#Datasheet|data sheet on the optiPoint 410/420 S phones]], which you can alternatively view under ''http://www.unify.com/us/support/downloads-phones-devices/''.
 +
: More detailed information on the features of the optiPoint 410/420 S phones can be found in the [[optiPoint 410/420 S#Administration_Manuals|administration manual]].
  
==== Wo finde ich Anleitungen zur Problembehebung, Installationshinweise usw.? ====
+
==== Who can I contact to request an optiPoint phone to try out? ====
 +
 
 +
: In Germany please contact our ''Business Support Center'' or get in touch directly with one of the Unify sales partners.
 +
 
 +
==== Where can I find instructions on troubleshooting, installation, etc.? ====
  
 
{{fixme| muss noch geklärt werden!}}
 
{{fixme| muss noch geklärt werden!}}
  
==== Welche Serviceleistungen stehen mir für mein optiPoint-Telefon zur Verfügung? ====
+
==== What services are available for my optiPoint phone? ====
  
 
{{fixme| muss noch geklärt werden!}}
 
{{fixme| muss noch geklärt werden!}}
 +
How can I get the Siemens Propiertor MIB info for the 410/420 & openscape phones? 
 +
 +
Can these fields be modified?  How?
  
== Telefonbedienung ==
+
== Phone Operation ==
  
==== Wie und wozu verwende ich die Navigationstasten (nur für optiPoint-Telefone mit Display)? ====
+
==== How do I use the navigation keys and what are they for (only for optiPoint phones with a display)? ====
  
: Wird im Display des optipoint-Telefons unten rechts ein Pfeilsymbol ('''>''') angezeigt, wird damit symboloisiert, dass das Menü weitere Funktionen beinhaltet.
+
: An arrow symbol ('''>''') in the bottom right corner of the display on the optiPoint phone indicates that the menu contains further functions.
: Falls Sie Einstellungen vornehmen möchten, können Sie mit den drei Dialogtasten [[Image:opk-li.png]] [[Image:opk-ok.png]] [[Image:opk-re.png]] und der Funktionstaste '''Abbrechen''' innerhalb des hierarchisch aufgebauten Menüsystems navigieren.
+
: If you wish to make settings, you can navigate within the hierarchical menu system using the three dialog keys [[Image:opk-li.png]] [[Image:opk-ok.png]] [[Image:opk-re.png]] and the function key '''Cancel'''.
  
 
{{fixme| weitere Informationen zu diesem Thema noch mit Doku-Abteilung abklären}}
 
{{fixme| weitere Informationen zu diesem Thema noch mit Doku-Abteilung abklären}}
  
==== Welche Möglichkeiten bieten mir die programmierbaren Funktionstasten des optiPoint-Telefons? ====
+
==== What options do the programmable function keys on the optiPoint phone offer? ====
 +
 
 +
: The function keys on the optiPoint phones are freely programmable and can be assigned various functions. This can be done using any of the available configuration methods, for example programming a function key on the device itself, programming via the [[WBM|Web interface]] or programming via [[DLS]]. Details on programming the function keys can be found in the respective [[optiPoint_410/420_S#User_Manuals|user manual]].
 +
 
 +
: For convenient labelling of the function keys on the optiPoint 410 S you can use the ''[http://oklt.teamone.de/ Online Key Labelling Tool]'' or alternatively fill in the label strips supplied with the phone by hand.
 +
 
 +
: The optiPoint 420 S features a ''self-labelling'' function. The description of the key is shown on a small [[LCD]] display beside the function key. Labelling is performed automatically when a function key is programmed. The key designation can, however, be changed whenever you want. Details on the ''self-labelling'' function can be found in the respective [[optiPoint_410/420_S#User_Manuals|user manual]].
 +
 
 +
==== How can I speed up dialling? ====
  
: Die Funktionstasten der optiPoint-Telefone sind frei programmierbar und können mit verschiedenen Funktionen belegt werden. Dazu können alle verfügbaren Konfigurationsmethoden, wie z. B. Programmierung einer Funktionstaste am Gerät selbst, Programmierung über die [[WBM|Webschnittstelle]] oder Programmierung via [[DLS]] genutzt werden. Details zur Programmierung der Funktionstasten finden sie in der jeweiligen [[optiPoint_410/420_S#User_Manuals|Bedienungsanleitung]].
+
: The time that expires between entering digits and dialling is six seconds in the default factory setting. This time can be set to a value between one and nine seconds via the appropriate settings.
  
: Für eine komfortable Beschriftung der Funktionstasten am optiPoint 410 S können Sie das ''[http://oklt.teamone.de/ Online Key Labelling Tool]'' verwenden oder per Hand die mitgelieferten Beschriftungsschtreifen ausfüllen.
+
: [[optiPoint]] phones offer the option of setting up a [[local dial plan]]. When a specific numerical sequence predefined by the dial plan is entered and identified, dialling is started immediately.
 +
: For example, a dial plan for entering codes for [[HiPath]] systems ([[feature access codes]]) in the format <code>*AB#</code> can be defined. '''A''' and '''B''' in this case stand for the digits between 0 and 9, which together with the asterisk character (*) form the code. This can, for example, activate or deactivate a specific function in a HiPath system.
  
: Das optiPoint 420 S verfügt über eine ''Self-Labelling''-Funktion. Die Beschreibung der Taste wird über ein kleines [[LCD]]-Display neben der Funktionstaste angezeigt. Die Beschriftung wird bei Programmierung einer Funktionstaste automatisch durchgeführt. Die Tastenbezeichnung kann jedoch jederzeit angepasst werden. Details zur ''Self-Labelling''-Funktion finden Sie in der jeweiligen [[optiPoint_410/420_S#User_Manuals|Bedienungsanleitung]].
+
==== Compatibility ====
  
==== Wie kann der Wahlvorgang beschleunigt werden? ====
+
===== Can I move a Mobile User between an optiPoint and an OpenStage telephone and vice versa? =====
  
: Die Zeit, die zwischen der Eingabe von Ziffern vegehen darf, bevor die Wahl durchgeführt wird, beträgt im Auslieferungszustand sechs Sekunden. Über die entsprechenden Einstellungen kann für diese Zeitspanne ein Wert zwischen einer und neun Sekunden festgelegt werden.
+
Cross mobility is released with the following restriction: Mobility between OpenStage and optiPoint410/420 phones is released with OpenStage SW version V2R0.16.0 and higher but please take notice of some minor restrictions/ details to be taken into account (see information below). With OpenStage SW version V2R0.16.0 and higher the "mobility log-on/ log-off" is released for mobile users logging in or off from any OpenStage SIP to optiPoint 410/420 SIP and vice versa. However: There are a few details and shortcomings to be taken into account when it comes to creating a mobile user in DLS and the interworking of default settings especially for multi-line appearance (position of the keys while using mobility and the key layout). In order to both understand and gain an overview on details to be taken into account please refer to the "Cross Mobility" document
 +
{{File-DL|SIP Mobility User - optiPoint and OpenStage Regression Test|pdf}}.
  
: [[optiPoint]]-Telefone bieten die Möglichkeit, einen lokalen Wählplan ([[Local Dialplan]]) einzurichten. Wird eine bestimmte, durch den Wählplan vordefinierte Ziffernfolge eingegeben und erkannt, wird der Wahlvorgang sofort eingeleitet.
+
== Phone Administration ==
: Beispielsweise kann ein Wählplan für die Eingabe von Kennzahlen für [[HiPath]]-Anlagen ([[Feature Access Codes]]) in der Form <code>*AB#</code> definiert werden. '''A''' und '''B''' stehen in diesem Fall für die Ziffern zwischen 0 und 9, welche zusammen mit dem Asterisk-Zeichen (*) die Kennzahl bilden. Diese kann z. B. in einer HiPath-Anlage eine bestimmte Funktion aktivieren bzw. deaktivieren.
 
  
== Telefon-Administration ==
+
==== What options are available for administration of the optiPoint phone? ====
  
==== Welche Möglichkeiten stehen für die Administration des optiPoint-Telefons zur Verfügung? ====
+
: The optiPoint can be configured via the local phone menu (using the keypad and display).
 +
: A more convenient way of configuring the optiPoint phone is via the integrated [[WBM|Web interface]], which can be called up using a Web browser.
  
: Das optiPoint kann über das lokale Telefonmenü (mittels Tastatur und Display) konfiguriert werden.
+
: If you are using a number of optiPoint phones we recommend that you use the [[DLS|Deployment Service]] (DLS) administration tool. This tool can be downloaded free of charge from the Internet. Plug&Play is supported if the DHCP-option 43 is available on the [[DHCP]] server. This means that in an ideal scenario, the optiPoint phone is automatically supplied with the necessary software and all necessary configuration data as soon as it is plugged into the network and can be used after a few minutes.
: Über die intergrierte [[WBM|Webschnittstelle]], welche mit Hilfe eines Web-Browsers aufgerufen werden kann, lässt sich das optiPoint-Telefon noch komfortabler konfigurieren.
+
: The detailed manual for the DLS is available for downloading as a PDF on the [[Deployment Service|DLS overview page]].
  
: Beim Einsatz von mehreren optiPoint-Telefonen empfiehlt sich der Einsatz des Administrationstools [[DLS|Deployment Service]] (DLS). Das Tool kann kostenlos aus dem Internet heruntergeladen werden. Ist am [[DHCP]]-Server die DHCP-option 43 verfügbar wird die Plug&Play-Funktion unterstützt. Dadurch wird das optiPoint-Telefon im Optimalfall nach dem Anstecken an das Netz automatisch mit der erforderlichen Software und allen notwendigen Konfigurationsdaten versorgt und kann nach wenigen Minuten verwendet werden.
+
: In addition, centralized administration is also possible via ([[Mass_Deployment_XML_configuration_files|XML]]) files.
: Das ausführliche Handbuch für das DLS steht als PDF auf der [[Deployment Service|DLS-Übersichtsseite]] zum Download bereit.
 
  
: Darüber hinaus ist eine zentrale Administration auch über ([[XML]]-)Dateien möglich.
+
==== What are the default passwords for the optiPoint 410/420 S phones? ====
  
==== Wie lauten die Standard-Passworte der optiPoint 410/420 S-Telefone? ====
+
:* User password: '''000000'''
 +
:* Administrator password: '''123456'''
 +
:* Restoration of the factory setting: '''124816'''
  
:* Benutzer-Passwort: '''000000'''
+
==== How can I access the integrated Web interface? ====
:* Administrator-Passwort: '''123456'''
 
:* Wiederherstellung der Werkseinstellung: '''124816'''
 
  
==== Wie kann ich auf die integrierte Webschnittstelle zugreifen? ====
+
: You can access the [[WBM|Web interface]] either as as '''user''' or as an '''administrator'''.
 +
: This requires a standard web browser (Internet Explorer recommended) that can access to the phone in the network.
  
: Um die [[WBM|Webschnittstelle]] aufzurufen, benötigen Sie die IP-Adresse des Telefons.
+
==== How can I get phone traces from an optiPoint 410/420 SIP phone? ====
: Sie können sich die IP-Adresse mit Hilfe des lokalen Telefonmenüs im Display anzeigen lassen:
 
::* Drücken Sie die Taste [[Image:opk-re.png]] und geben Sie über das Tastefeld die Ziffern [[Image:opk-1.png]] und [[Image:opk-3.png]] ein.
 
::* Sie werden aufgefordert das Admin-Passwort einzugeben (im Auslieferungszustand: '''123456''').
 
::* Nachdem Sie das Passwort mit der Taste [[Image:opk-ok.png]] bestätigt haben, drücken Sie erneut die Taste [[Image:opk-re.png]].
 
::* Die IP-Adresse wird im Display angezeigt.
 
: Sie können sich ebenfalls die IP-Adresse im Display anzeigen lassen, indem Sie bei eingeschaltetem und im Netzwerk über DHCP registrierten Gerät das Netzwerkkabel entfernen. Im Ruhezustand des Geräts wird dann im Display abwechselnd „Kein Netz“ und die IP-Adresse des Geräts angezeigt.
 
  
: Zum Öffnen der Webschnittstelle tragen Sie in der Adresszeile des Web-Browers die IP-Adresse Ihres Geräts wie folgt ein:
+
: Use the information in the {{File-DL|optiPoint 410-420 SIP TraceGuide|pdf}}.
: <code>https://###.###.###.###</code> (# steht für die Ziffern der IP-Adresse des Geräts).
 
: Nachdem Sie die Eingabe bestätigt haben wird die Benutzeroberfläche der Webschnittstelle geladen.
 
: Melden Sie sich nun als Administrator an (Standard-Passwort: '''123456''') um auf die Webschnittstelle zugreifen zu können.
 
  
 +
: See also [[optiPoint SIP UDP Trace]] and [[optiPoint 410/420 S handle internal phone traces]].
  
==== Why there are several SIP port fields in the local menu and the administration [[WBM]]? ====
+
==== Why are there several SIP port fields in the local menu and the administration [[WBM]]? ====
  
: In the administration section (local menue: <code>02=System</code> &gt; <code>07=SIP addresses</code> or [[WBM]] admin you see two kind of SIP port settings.
+
: In the administration section (local menu: <code>02=System</code> &gt; <code>07=SIP addresses</code> or [[WBM]] admin you see two kind of SIP port settings.
  
: [[Image:OptiPoint_410420_S_V4_1_SIP_Port_Settings.jpg|none|thumb|SIP port settings sample on [[WBM]]]]
+
: [[Image:OptiPoint_410420_S_V6_0_SIP_Port_Settings.jpg|none|thumb|SIP-Port Settings-Beispiel on [[WBM]]]]
  
: If you provide port numbers in the <code>Port</code> fields subsequent to the address fiels, then ...
+
: If you provide port numbers in the <code>Port</code> fields subsequent to the address fields, then ...
 
:* these values will specify the '''destination''' port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or
 
:* these values will specify the '''destination''' port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or
 
:* the values are set equal to zero, then the '''default''' SIP port numbers will be used - or if [[DNS SRV]] is used, the port numbers provided in DNS-SRV responses will apply
 
:* the values are set equal to zero, then the '''default''' SIP port numbers will be used - or if [[DNS SRV]] is used, the port numbers provided in DNS-SRV responses will apply
Line 100: Line 105:
 
: The field <code>SIP port</code> below denotes the '''sending''' port used on the phone side.
 
: The field <code>SIP port</code> below denotes the '''sending''' port used on the phone side.
  
==== Wie aktualisiere ich die Firmware des Telefons und woher bekomme ich die Firmware? ====
+
==== How do I update the firmware on the phone and where do I get the firmware? ====
  
: Die optiPoint-Telefone verfügen bei Auslieferung über eine, zum Zeitpunkt der Auslieferung, aktuelle Firmware-Version. Im Rahmen der kontinuierlichen Weiterentwicklung und Verbesserung der Firmware, stehen für die einzelenen Telefon-Modelle nach einer gewissen Zeit unter Umständen aktuellere Korrektur-Versionen der Firmware zur Verfügung.
+
: The optiPoint phones are shipped with a firmware version that is up-to-date at the time of shipping. As part of the continuous further development and improvement of the firmware, more up-to-date patches for the firmware may be made available for the individual phone models after a certain amount of time.
: Eine entsprechende Aktualisierung ist empfehlenswert und kann ohne größeren Aufwand über eine der Administrationsschnittstellen, wie die [[WBM|Webschnittstelle]] oder [[DLS]] durchgeführt werden.
+
: Updating is recommended and can be quickly and easily performed via one of the administration interfaces such as the [[WBM|Web interface]] or [[DLS]].
: Die Verteilung von Firmware-Updates für optiPoint-Telefone unterstehen gesetzlichen Vorschriften, wie z. B. der Exportkontrolle. Daher dürfen Firmware-Updates nur im Rahmen entsprechender Supportverträge über das [[SEBA]]-Web-Portal (https://enterprise-businessarea.siemens.com) weitergegeben werden.
+
: The distribution of firmware updates for optiPoint phones is subject to statutory regulations such as export controls. For that reason, firmware updates may only be distributed via the {{SEBA}} Web portal within the framework of an appropriate software contract (login required).
  
==== Wie führe ich einen Neustart des Telefons aus? ====
+
==== How do I restart the phone? ====
  
:* Drücken Sie auf dem Telefon die Tastenfolge: [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-2.png]].
+
:* Press the following key sequence on the phone: [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-2.png]].
:* Das Telefon startet nach wenigen Sekunden automatisch neu.
+
:* The phone will ask if it should restart. This must be confirmed with the tick-key.
  
: Alternativ können Sie auch einen Neustart über das Menü der [[WBM|Webschnittstelle]] des Telefons oder über den [[DLS]] ausführen.
+
: Alternatively you can also perform a restart via the phone's [[WBM|Web interface]] menu or via the [[DLS]].
  
==== Wie setze ich das optiPoint-Telefon wieder in den Auslieferungszustand zurück? ====
+
==== How do I reset the factory defaults on the optiPoint phone? ====
  
: Eine detailierte Schritt-für-Schritt-Anleitung des jeweiligen Telefon-Modells finden Sie auf der Seite zur [[Factory reset optiPoint 410/420 S phones|Wiederherstellung des Auslieferungszustandes eines optiPoint 410/420 S]].
+
: Detailed step-by-step instructions for the respective phone model can be found on the page on [[optiPoint 410/420 S factory reset|resetting the factory defaults on optiPoint 410/420 S phones]].
  
==== Welche Schritte sind notwendig, um das optiPoint-Telefon unter Minimal-Einstellungen betriebsbereit zu machen? ====
+
==== What steps are required to get the optiPoint phone working with the minimum settings? ====
  
: Eine Inbetriebnahme des optiPoint-Telefons ist in wenigen Schritten möglich.
+
: You can commission your optiPoint phone in just a few steps.
: Achten Sie darauf, das die [[DHCP]]-Funktion Ihres lokalen Netzwerks aktiviert ist. Nachdem das Telefon gestartet wurde und ihm eine IP-Adresse über DHCP automatisch zugewiesen wurde, müssen Sie nur noch dem Telefon eine Rufnummer sowie die SIP-Rigistrar- als auch die SIP-Server-Adresse zuweisen. Nutzen Sie für diese Einstellungen die komfortable [[WBM|Webschnittstelle]] des optiPoint-Telefons.
+
: Make sure that the [[DHCP]] function of your local network is activated. Once the phone has been switched on and automatically assigned an IP address via DHCP, all that remains is to assign the phone a call number as well as the SIP registrar address and SIP server address. Use the convenient [[WBM|Web interface]] of the optiPoint phone for these settings.
: Weitere Details zur Anmeldung an eine Kommunikationsplattform erhalten Sie beispielsweise in dem Dokument zur Einrichtung eines optiPoint in einer [[Asterisk]]-Umgebung.
+
: Further details on logging in to a communication platform can be found in the document on setting up an optiPoint in an [[Asterisk]] environment, for example.
  
==== Wie kann ich meine persönlichen Telefon-Einstellungen sichern und wiederherstellen? ====
+
==== How can I save and restore my personal phone settings? ====
  
: Über den Administrationsbereich der [[WBM|Webschnittstelle]] des optiPoint 410/420 S können Sie mittels einer [[FTP]]-Verbindung eine Kopie Ihrer Telefoneinstellungen in Form eines Konfigurationsfiles auf Ihrem Server bzw. PC abspeichern und auch wieder auf das Telefon überspielen.
+
: The administration area of the [[WBM|Web interface]] for the optiPoint 410/420 S lets you save a copy of your phone settings in the form of a configuration file to your server or PC using an [[FTP]] connection and load these settings back onto your phone.
: Bevor Sie die Telefon-Einstellungen sichern können, müssen Sie im Administrationsbereich der Webschnittstelle folgende Seite aufrufen:
+
: Before you can save the phone settings, you must call up the following page in the administration area of the Web interface:
 
:: ''[[WBM]] > Administration > File transfer and phone download settings''.
 
:: ''[[WBM]] > Administration > File transfer and phone download settings''.
: Tragen Sie dort die entsprechenden Werte für den FTP-Up- bzw. Download ein.
+
: Enter the corresponding values for the FTP upload and/or download here.
  
:'''Telefoneinstellungen sichern''':
+
:'''Saving phone settings''':
:: Öffnen Sie folgende Seite im Administrationsbereich der Webschnittstelle:
+
:: Open the following page in the administration area of the Web interface:
 
:: ''Upload/Download > Upload configuration''.
 
:: ''Upload/Download > Upload configuration''.
: Starten Sie anschließend die Sicherung der Telefoneinstellungen, indem Sie auf die Schaltfläche <code>Upload</code> klicken.
+
: Start saving of the phone settings by clicking on the <code>Upload</code> button.
  
:'''Telefoneinstellungen wiederherstellen''':
+
:'''Restoring phone settings''':
:: Öffnen Sie die folgende Seite im Administrationsbereich der Webschnittstelle:
+
:: Open the following page in the administration area of the Web interface:
 
:: ''Upload/Download > Download configuration''.
 
:: ''Upload/Download > Download configuration''.
: Starten Sie anschließend die Wiederherstellung der Telefoneinstellungen, indem Sie auf die Schaltfläche <code>Download</code> klicken.
+
: Start restoration of the phone settings by clicking on the <code>Download</code> button.
 +
 
 +
 
 +
'''Note:''' Mobile User Settings are not stored into the uploaded config-file. Mobile User Settings can only be stored in the Deployment Service
  
== Anschluss des Telefons ==
+
== Phone Connection ==
  
==== Welche Anschluss-Varianten gibt es in der optiPoint 410/420-Produktreihe? ====
+
==== What connection variants are available in the optiPoint 410/420 product series? ====
  
: Die optiPoint IP-Telefone gibt es in zwei Anschlussvarianten:
+
: The optiPoint IP phones come in two connection variants:
  
:* '''optiPoint 410 und optiPoint 420''' (in verschiedenen Ausführungen)
+
:* '''optiPoint 410 and optiPoint 420''' (in various designs)
:: Die Auslieferung dieser Anschluss-Variante erfolgt mit dem Siemens CorNet IP-Protokoll ([[HFA]]). Diese Variante nutzt das [[H.323]]-Protokoll in Kombination mit dem Sicherheitsprotokoll [[H.235]] Annex D. Diese Modell-Variante ist für den Betrieb an Siemens HiPath-Anlagen wie [[HiPath 2000]], [[HiPath 3000/5000]] oder [[HiPath 4000]] vorgesehen.
+
:: This connection variant is shipped with the Siemens CorNet IP protocol ([[HFA]]). This variant uses the [[H.323]] protocol in combination with the [[H.235]] Annex D security protocol. This model variant is intended for operation on Siemens HiPath systems such as [[HiPath 2000]], [[HiPath 3000/5000]] or [[HiPath 4000]].
:* '''optiPoint 410 S und optiPoint 420 S''' (in verschiedenen Ausführungen)
+
:* '''optiPoint 410 S and optiPoint 420 S''' (in various designs)
:: Die Auslieferung dieser Anschluss-Variante erfolgt mit dem [[SIP]]-Protokoll (RFC 3261). Diese Variante ist für den Betrieb an Siemens HiPath-Anlagen wie [[HiPath 8000]], SURPASS Hosted Office Lösungen mit hiQ4200 Application-Server oder anderen, das SIP-Protokoll (RFC 3261) unterstützende Kommunikationsplattformen (wie z. B. [[optiPoint_connectivity_to_Sylantro|Sylantro]] oder [[optiPoint_connectivity_to_Broadsoft|Broadsoft]]) geeignet.
+
:: This connection variant is shipped with the [[SIP]] protocol (RFC 3261). This variant is suitable for operation on Siemens HiPath systems such as [[OpenScape Voice]], SURPASS Hosted Office solutions with hiQ4200 application servers or other communication platforms that support the SIP protocol (RFC 3261) (e.g. [[optiPoint_connectivity_to_Sylantro|Sylantro]] or [[optiPoint_connectivity_to_Broadsoft|Broadsoft]]).
  
==== Welche Art der Stromversorgung kann ich für das optiPoint-Telefon nutzen? ====
+
==== What type of power supply can I use for the optiPoint phone? ====
  
: Sofern bei Ihnen eingerichtet, sollten Sie die Stromversorgung über das Netzwerk ([[PoE|Power over Ethernet]]) nutzen. Damit entfällt der zusätzliche Einsatz eines separaten Netzteils und es sind weniger Kabel vorhanden, welche stören könnten.  
+
: If you have it set up, you should use [[PoE|Power over Ethernet]]. You do not then need to use a separate power supply unit and there are fewer cables which could cause interference.  
  
: Zu [[PoE]] siehe auch {{en}} [[PoE classes of optiPoint phones|Übersicht zu PoE-Leistungsklassen]] und {{en}} [[PoE#PoE classes|Übersicht zur Leistungsaufnahme]].
+
: For more on [[PoE]] see also [[optiPoint power supply and PoE classes]].
  
: Ist die Stromversorgung über das Netzwerk nicht möglich, verwenden Sie das separat erhältliche Original-Netzgerät. Das Netzgerät ist für europäische Länder, Großbritannien und den USA in jeweils angepassten Leistungs-Varianten erhältlich.
+
: If PoE is not available, use the separately available genuine power supply unit. The power supply unit is available in different output variants for European countries, Great Britain, and the USA.
  
== Standards und Protokolle ==
+
== Standards and Protocols ==
  
==== Welchen SIP-Standard unterstützen die optiPoint SIP-Telefone? ====
+
==== What SIP standard do the optiPoint SIP phones support? ====
  
: Die Entwicklung der optiPoint SIP-Telefone richtet sich nach den allgemein verfügbaren SIP-Standards aus, die im Rahmen der [[IETF]] erarbeitet und dokumentiert werden. Neben dem aktuellen SIP-Standard RFC 3261 werden eine ganze Reihe weiterer [[IETF]] Standards unterstützt weitere Details erhalten Sie über Ihren vertrieblichen Ansprechpartner.
+
: The development of the optiPoint SIP phones is determined by the generally available SIP standards developed and documented within the framework of the [[IETF]]. In addition to the current SIP standard, RFC 3261, a whole series of other [[IETF]] standards are supported contact your sales partner for further details.
  
==== Welche Adresskomponenten (Ports) unterstützt bzw. verwendet ein optiPoint 410/420 S? ====
+
==== What address components (ports) does an optiPoint 410/420 S support/use? ====
  
: Eine detailierte Auflistung der unterstützten bzw. verwendeten Ports finden Sie im [[optiPoint_410/420_S#Administration_Manuals|Administrationshandbuch für optiPoint 410/420 S]]-Telefone.
+
: A detailed list of the ports supported/used can be found in the [[optiPoint_410/420_S#Administration_Manuals|administration manual for optiPoint 410/420 S]] phones.
  
==== Welche Netzwerkprotokolle werden für die Sprachübertragung bei SIP unterstützt? ====
+
==== What network protocols are supported for voice transmission with SIP? ====
  
: Folgende Netzwerkprotokolle werden unterstützt:
+
: The following network protocols are supported:
 
::* [[UDP]] (User Datagram Protocol)
 
::* [[UDP]] (User Datagram Protocol)
 
::* [[TCP]] (Transmission Control Protocol)
 
::* [[TCP]] (Transmission Control Protocol)
Line 178: Line 186:
 
== Server/Proxy/Registrar ==
 
== Server/Proxy/Registrar ==
  
==== An welchen Systemen, Servern oder Proxies kann ich optiPoint SIP-Telefone betreiben? ====
+
==== On what systems, servers or proxies can I operate optiPoint SIP phones? ====
 +
 
 +
: In principle the devices can be operated on any standard-compatible SIP system (SIP V2, RFC 3261).
 +
: To ensure reliable operation with all the required functions from the outset, the products are qualified on a range of systems – details can be found in the respective [[optiPoint_410/420_S#Documentation|data sheets]].
  
: Grundsätzlich können die Geräte an jedem Standard-kompatiblem SIP-System betrieben werden (SIP V2, RFC 3261).
+
==== Do the optiPoint SIP phones support server-dependent features? ====
: Um einen verlässlichen Betrieb mit allen gewünschten Funktionen von Anfang an sicherzustellen, sind die Produkte an eine Reihe von Systemen qualifiziert – Details sind den jeweiligen [[optiPoint_410/420_S#Documentation|Datenblättern]] zu entnehmen.
 
  
==== Unterstützen die optiPoint SIP-Telefone serverabhängige Leistungsmerkmale? ====
+
: A range of manufacturer-specific function versions are available on the basis of standardized SIP mechanisms. The optiPoint SIP phones easily adapt to these through selection of the appropriate server profile during installation. Details can be found in the respective data sheets and the administrator manuals.
  
: Auf Basis standardisierter SIP-Mechanismen sind eine Reihe von herstellerspezifischen Ausprägungen von Funktionen verfügbar. Die optiPoint SIP-Telefone passen sich diesen einfach durch die Auswahl des entsprechenden Serverprofils während der Installation an. Details entnehmen Sie bitte den jeweiligen Datenblättern und den Administrationshandbüchern.
+
==== What does [[NAT]] mean, what is a [[STUN]] server and when it is necessary? ====
  
==== Was bedeutet [[NAT]], was ist ein [[STUN]]-Server und wann ist er erforderlich? ====
+
: The operation of an SIP phone by a VoIP provider requires special settings and releases to facilitate the transportation of voice ([[RTP]] protocol) and connection information ([[SIP]] protocol) across network boundaries (e.g. between a private LAN and the network of the VoIP provider).
 +
: One of these special settings is controlled by the [[NAT]] ('''N'''etwork '''A'''ddress '''T'''ranslation protocol).
 +
: More on the topic of [[NAT]] in connection with voice over IP can be found under {{wp|en|Network_address_translation}}, for example.
  
: Der Betrieb eines SIP-Telefons bei einem VoIP-Anbieter setzt besondere Einstellungen und Freigaben voraus, um den Transport von Sprache ([[RTP]]-Protokoll) und Verbindungsinformationen ([[SIP]]-Protokoll) über die Netzwerkgrenzen (z. B. zwischen privatem LAN und dem Netzwerk des VoIP-Anbieters) zu ermöglichen.
+
: Some VoIP providers use [[NAT]] within their own network, which means the subscriber does not need to make any special settings such as activating a [[STUN]] server function ('''S'''imple '''T'''raversal of '''U'''DP through '''N'''ATs) or using an ''Application Layer Gateway''. Ask your VoIP provider directly whether you need to activate the [[STUN]] server function on your phone.
: Eine dieser besonderen Einstellungen wird durch das [[NAT]] ('''N'''etwork '''A'''ddress '''T'''ranslation-Protokoll) gesteuert.
 
: Mehr zum Thema [[NAT]] bei Voice over IP erfahren Sie z. B. unter http://www.mysip.ch/ in der Rubrick ''SIP and NAT''.
 
  
: Der Einsatz von [[NAT]] geschieht bei einigen VoIP-Anbietern schon im Anbieter-eigenen Netzwerk, wodurch auf Teilnehmerseite keine besonderen Einstellungen, wie z. B. die Aktivierung einer [[STUN]]-Server-Funktion ('''S'''imple '''T'''raversal of '''U'''DP through '''N'''ATs) oder der Einsatz eines ''Application Layer Gateways'') erforderlich ist. Ob Ihr VoIP-Anbieter eine aktivierte [[STUN]]-Server-Funktion ihres Telefons voraussetzt, erfragen Sie bitte direkt bei Ihrem VoIP-Anbieter.
+
==== How assign Message Waiting Indication (MWI)? ====
: Für Einsatzfälle, die die Einstellmöglichkiet des [[STUN]]-Protokolls am Telefon bereits voraussetzen, empfehlen wir das [[optiPoint 150 S]]. Installations-Dokumente für einige ausgewählte VoIP-Anbieter finden Sie auf der Seite zur [[Setup_the_optiPoint_150_S_with_several_provider|VoIP-Konfigurationsübersicht des optiPoint 150 S]].
 
  
== Netzwerk (LAN) ==
+
:The settings for Adminstration of the oP410/420S contains in the SIP Enviroment/Miscellaneous two fileds for Message Waiting Indication:
 +
:- Message Waiting IP address or DNS name
 +
:- Voicemail Number
 +
:The MWI is only working if one of the field contains an entry.
 +
:In every case, that the message can get via Number and/or over the Proxy/Server the field "Voicemail number" must be used (most of the cases)
 +
:Only in the case, that the Message Server has nothing to do with the Proxy/Server and there are no dialling Number available,
 +
:the assignment will be make over the filed "Message Waiting IP address or DNS name"
  
==== Welche DHCP-Optionen stehen zur Verfügung? ====
+
== Network (LAN) ==  
 +
 
 +
==== What DHCP options are available? ====
  
 
{{fixme| muss noch geklärt werden!}}
 
{{fixme| muss noch geklärt werden!}}
  
==== Netzwerkeigenschaften des eingebaute LAN Mini-Switch ====
+
==== Network attributes of the integrated LAN mini switch ====
  
 
* Management <br /> t.b.d.
 
* Management <br /> t.b.d.
* VLAN Support <br /> t.b.d.
+
* VLAN support <br /> t.b.d.
 
* Security <br /> t.b.d.
 
* Security <br /> t.b.d.
 
{{fixme| muss noch geklärt werden!}}
 
{{fixme| muss noch geklärt werden!}}
  
==== IP-Adressenvergabe über DHCP ====
+
==== IP address assignment via DHCP ====
  
Im Administrationshandbuch ist der „Hochlaufprozess“ des Telefons skizziert, mit/ohne [[DHCP]] sowie mit/ohne [[VLAN]] (siehe Kapitel „Installation/Startup Procedure“).
+
: The administration manual describes the startup process for the phone with and without [[DHCP]] as well as with and without [[VLAN]] (see the chapter "Installation/Startup Procedure").
  
 
{{Info|
 
{{Info|
Im Zusammenhang mit älteren LAN Komponenten kann es sein, dass das Telefon trotz funktionierenden DHCP-Servers im LAN keine IP Addresse zugewiesen bekommt. Wenn dies der Fall ist, bitte über das lokale Administrationsmenü oder [[WBM]] die [[QoS]]-Aktivierung auf Layer 2 und Layer 3 deaktivieren und das Gerät neu starten.
+
When using older LAN components, the phone may not be assigned an IP address despite there being a functioning DHCP server in the LAN. If this happens, please deactivate the [[QoS]] activation on layer 2 and layer 3 via the local administration menu or [[WBM]] and restart the device.
}}
+
|25}}
 
 
  
 +
{{SeeAlso optiPoint 410/420 S}}
  
[[Category:optiPoint (de)|optiPoint]]
+
[[Category:optiPoint|optiPoint]]
[[Category:Konfiguration]]
+
[[Category:Configuration]]

Latest revision as of 08:30, 18 December 2014

The support for this product has been discontinued!
Please visit Devices to get further information about the current product portfolio.


In this optiPoint 410/420 S FAQ you will find answers to frequently asked questions on the optiPoint 410/420 S phone family, divided into various topics.

Contents

General

What documents are there for the optiPoint phones and where do I find them?

All optiPoint phones are shipped with a printed document in multiple languages providing brief instruction regarding installation and operation.
Comprehensive administration instructions on installation, operation, and maintenance as well as detailed operating instructions for the user are provided in electronic form (for the most part in PDF format) on the optiPoint 410/420 S overview page. These documents also provide detailed information on topics such as device configuration, network settings, and applications.

How do I get an overview of the features of the optiPoint 410/420 S phones?

You will get a quick overview of the features in the corresponding data sheet on the optiPoint 410/420 S phones, which you can alternatively view under http://www.unify.com/us/support/downloads-phones-devices/.
More detailed information on the features of the optiPoint 410/420 S phones can be found in the administration manual.

Who can I contact to request an optiPoint phone to try out?

In Germany please contact our Business Support Center or get in touch directly with one of the Unify sales partners.

Where can I find instructions on troubleshooting, installation, etc.?

The following comment should be fixed | Show fixme list
muss noch geklärt werden!

What services are available for my optiPoint phone?

The following comment should be fixed | Show fixme list
muss noch geklärt werden!
How can I get the Siemens Propiertor MIB info for the 410/420 & openscape phones?  
Can these fields be modified?  How?

Phone Operation

How do I use the navigation keys and what are they for (only for optiPoint phones with a display)?

An arrow symbol (>) in the bottom right corner of the display on the optiPoint phone indicates that the menu contains further functions.
If you wish to make settings, you can navigate within the hierarchical menu system using the three dialog keys opk-li.png opk-ok.png opk-re.png and the function key Cancel.


The following comment should be fixed | Show fixme list
weitere Informationen zu diesem Thema noch mit Doku-Abteilung abklären

What options do the programmable function keys on the optiPoint phone offer?

The function keys on the optiPoint phones are freely programmable and can be assigned various functions. This can be done using any of the available configuration methods, for example programming a function key on the device itself, programming via the Web interface or programming via DLS. Details on programming the function keys can be found in the respective user manual.
For convenient labelling of the function keys on the optiPoint 410 S you can use the Online Key Labelling Tool or alternatively fill in the label strips supplied with the phone by hand.
The optiPoint 420 S features a self-labelling function. The description of the key is shown on a small LCD display beside the function key. Labelling is performed automatically when a function key is programmed. The key designation can, however, be changed whenever you want. Details on the self-labelling function can be found in the respective user manual.

How can I speed up dialling?

The time that expires between entering digits and dialling is six seconds in the default factory setting. This time can be set to a value between one and nine seconds via the appropriate settings.
optiPoint phones offer the option of setting up a local dial plan. When a specific numerical sequence predefined by the dial plan is entered and identified, dialling is started immediately.
For example, a dial plan for entering codes for HiPath systems (feature access codes) in the format *AB# can be defined. A and B in this case stand for the digits between 0 and 9, which together with the asterisk character (*) form the code. This can, for example, activate or deactivate a specific function in a HiPath system.

Compatibility

Can I move a Mobile User between an optiPoint and an OpenStage telephone and vice versa?

Cross mobility is released with the following restriction: Mobility between OpenStage and optiPoint410/420 phones is released with OpenStage SW version V2R0.16.0 and higher but please take notice of some minor restrictions/ details to be taken into account (see information below). With OpenStage SW version V2R0.16.0 and higher the "mobility log-on/ log-off" is released for mobile users logging in or off from any OpenStage SIP to optiPoint 410/420 SIP and vice versa. However: There are a few details and shortcomings to be taken into account when it comes to creating a mobile user in DLS and the interworking of default settings especially for multi-line appearance (position of the keys while using mobility and the key layout). In order to both understand and gain an overview on details to be taken into account please refer to the "Cross Mobility" document

pdf.png  SIP Mobility User - optiPoint and OpenStage Regression Test.

Phone Administration

What options are available for administration of the optiPoint phone?

The optiPoint can be configured via the local phone menu (using the keypad and display).
A more convenient way of configuring the optiPoint phone is via the integrated Web interface, which can be called up using a Web browser.
If you are using a number of optiPoint phones we recommend that you use the Deployment Service (DLS) administration tool. This tool can be downloaded free of charge from the Internet. Plug&Play is supported if the DHCP-option 43 is available on the DHCP server. This means that in an ideal scenario, the optiPoint phone is automatically supplied with the necessary software and all necessary configuration data as soon as it is plugged into the network and can be used after a few minutes.
The detailed manual for the DLS is available for downloading as a PDF on the DLS overview page.
In addition, centralized administration is also possible via (XML) files.

What are the default passwords for the optiPoint 410/420 S phones?

  • User password: 000000
  • Administrator password: 123456
  • Restoration of the factory setting: 124816

How can I access the integrated Web interface?

You can access the Web interface either as as user or as an administrator.
This requires a standard web browser (Internet Explorer recommended) that can access to the phone in the network.

How can I get phone traces from an optiPoint 410/420 SIP phone?

Use the information in the pdf.png  optiPoint 410-420 SIP TraceGuide.
See also optiPoint SIP UDP Trace and optiPoint 410/420 S handle internal phone traces.

Why are there several SIP port fields in the local menu and the administration WBM?

In the administration section (local menu: 02=System > 07=SIP addresses or WBM admin you see two kind of SIP port settings.
SIP-Port Settings-Beispiel on WBM
If you provide port numbers in the Port fields subsequent to the address fields, then ...
  • these values will specify the destination port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or
  • the values are set equal to zero, then the default SIP port numbers will be used - or if DNS SRV is used, the port numbers provided in DNS-SRV responses will apply
  • you may specify different SIP ports for registrar and server.
The field SIP port below denotes the sending port used on the phone side.

How do I update the firmware on the phone and where do I get the firmware?

The optiPoint phones are shipped with a firmware version that is up-to-date at the time of shipping. As part of the continuous further development and improvement of the firmware, more up-to-date patches for the firmware may be made available for the individual phone models after a certain amount of time.
Updating is recommended and can be quickly and easily performed via one of the administration interfaces such as the Web interface or DLS.
The distribution of firmware updates for optiPoint phones is subject to statutory regulations such as export controls. For that reason, firmware updates may only be distributed via the Partner Portal Web portal within the framework of an appropriate software contract (login required).

How do I restart the phone?

  • Press the following key sequence on the phone: opk-minus.png opk-plus.png opk-ast.png opk-2.png.
  • The phone will ask if it should restart. This must be confirmed with the tick-key.
Alternatively you can also perform a restart via the phone's Web interface menu or via the DLS.

How do I reset the factory defaults on the optiPoint phone?

Detailed step-by-step instructions for the respective phone model can be found on the page on resetting the factory defaults on optiPoint 410/420 S phones.

What steps are required to get the optiPoint phone working with the minimum settings?

You can commission your optiPoint phone in just a few steps.
Make sure that the DHCP function of your local network is activated. Once the phone has been switched on and automatically assigned an IP address via DHCP, all that remains is to assign the phone a call number as well as the SIP registrar address and SIP server address. Use the convenient Web interface of the optiPoint phone for these settings.
Further details on logging in to a communication platform can be found in the document on setting up an optiPoint in an Asterisk environment, for example.

How can I save and restore my personal phone settings?

The administration area of the Web interface for the optiPoint 410/420 S lets you save a copy of your phone settings in the form of a configuration file to your server or PC using an FTP connection and load these settings back onto your phone.
Before you can save the phone settings, you must call up the following page in the administration area of the Web interface:
WBM > Administration > File transfer and phone download settings.
Enter the corresponding values for the FTP upload and/or download here.
Saving phone settings:
Open the following page in the administration area of the Web interface:
Upload/Download > Upload configuration.
Start saving of the phone settings by clicking on the Upload button.
Restoring phone settings:
Open the following page in the administration area of the Web interface:
Upload/Download > Download configuration.
Start restoration of the phone settings by clicking on the Download button.


Note: Mobile User Settings are not stored into the uploaded config-file. Mobile User Settings can only be stored in the Deployment Service

Phone Connection

What connection variants are available in the optiPoint 410/420 product series?

The optiPoint IP phones come in two connection variants:
  • optiPoint 410 and optiPoint 420 (in various designs)
This connection variant is shipped with the Siemens CorNet IP protocol (HFA). This variant uses the H.323 protocol in combination with the H.235 Annex D security protocol. This model variant is intended for operation on Siemens HiPath systems such as HiPath 2000, HiPath 3000/5000 or HiPath 4000.
  • optiPoint 410 S and optiPoint 420 S (in various designs)
This connection variant is shipped with the SIP protocol (RFC 3261). This variant is suitable for operation on Siemens HiPath systems such as OpenScape Voice, SURPASS Hosted Office solutions with hiQ4200 application servers or other communication platforms that support the SIP protocol (RFC 3261) (e.g. Sylantro or Broadsoft).

What type of power supply can I use for the optiPoint phone?

If you have it set up, you should use Power over Ethernet. You do not then need to use a separate power supply unit and there are fewer cables which could cause interference.
For more on PoE see also optiPoint power supply and PoE classes.
If PoE is not available, use the separately available genuine power supply unit. The power supply unit is available in different output variants for European countries, Great Britain, and the USA.

Standards and Protocols

What SIP standard do the optiPoint SIP phones support?

The development of the optiPoint SIP phones is determined by the generally available SIP standards developed and documented within the framework of the IETF. In addition to the current SIP standard, RFC 3261, a whole series of other IETF standards are supported – contact your sales partner for further details.

What address components (ports) does an optiPoint 410/420 S support/use?

A detailed list of the ports supported/used can be found in the administration manual for optiPoint 410/420 S phones.

What network protocols are supported for voice transmission with SIP?

The following network protocols are supported:
  • UDP (User Datagram Protocol)
  • TCP (Transmission Control Protocol)
  • TLS (Transport Layer Security)

Server/Proxy/Registrar

On what systems, servers or proxies can I operate optiPoint SIP phones?

In principle the devices can be operated on any standard-compatible SIP system (SIP V2, RFC 3261).
To ensure reliable operation with all the required functions from the outset, the products are qualified on a range of systems – details can be found in the respective data sheets.

Do the optiPoint SIP phones support server-dependent features?

A range of manufacturer-specific function versions are available on the basis of standardized SIP mechanisms. The optiPoint SIP phones easily adapt to these through selection of the appropriate server profile during installation. Details can be found in the respective data sheets and the administrator manuals.

What does NAT mean, what is a STUN server and when it is necessary?

The operation of an SIP phone by a VoIP provider requires special settings and releases to facilitate the transportation of voice (RTP protocol) and connection information (SIP protocol) across network boundaries (e.g. between a private LAN and the network of the VoIP provider).
One of these special settings is controlled by the NAT (Network Address Translation protocol).
More on the topic of NAT in connection with voice over IP can be found under Wikipedia (en) Network_address_translation, for example.
Some VoIP providers use NAT within their own network, which means the subscriber does not need to make any special settings such as activating a STUN server function (Simple Traversal of UDP through NATs) or using an Application Layer Gateway. Ask your VoIP provider directly whether you need to activate the STUN server function on your phone.

How assign Message Waiting Indication (MWI)?

The settings for Adminstration of the oP410/420S contains in the SIP Enviroment/Miscellaneous two fileds for Message Waiting Indication:
- Message Waiting IP address or DNS name
- Voicemail Number
The MWI is only working if one of the field contains an entry.
In every case, that the message can get via Number and/or over the Proxy/Server the field "Voicemail number" must be used (most of the cases)
Only in the case, that the Message Server has nothing to do with the Proxy/Server and there are no dialling Number available,
the assignment will be make over the filed "Message Waiting IP address or DNS name"

Network (LAN)

What DHCP options are available?

The following comment should be fixed | Show fixme list
muss noch geklärt werden!

Network attributes of the integrated LAN mini switch

  • Management
    t.b.d.
  • VLAN support
    t.b.d.
  • Security
    t.b.d.
The following comment should be fixed | Show fixme list
muss noch geklärt werden!

IP address assignment via DHCP

The administration manual describes the startup process for the phone with and without DHCP as well as with and without VLAN (see the chapter "Installation/Startup Procedure").

When using older LAN components, the phone may not be assigned an IP address despite there being a functioning DHCP server in the LAN. If this happens, please deactivate the QoS activation on layer 2 and layer 3 via the local administration menu or WBM and restart the device.

See also