Power supply and PoE classes
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Revision as of 08:10, 30 April 2013 by Horemu (talk | contribs) (moved OpenStage power supply and PoE classes to Power supply and PoE classes)
The table below shows the required power provision of OpenStage phones and accessories.
Contents
Power Provision Matrix
The OpenStage Phone Adapter always need a separate power supply.
IP devices
| Device | ... with Key Modules |
Power over Ethernet | External Power Unit | ||
|---|---|---|---|---|---|
| Class 1 | Class 2 | Class 3 | |||
| OpenStage 15 | 0 or 1 (paper) | 
|
- | - | - |
| OpenStage 20 E OpenStage 20 |
- |
|
- | - | - |
| OpenStage 20 G | - | - |
|
- | - |
| OpenStage 40 | 0, 1 or 2 | - |
|
- | - |
| OpenStage 40 with BLF | 0 | - |
|
- | - |
| OpenStage 40 G | 0, 1 or 2 | - | - |
|
- |
| OpenStage 40 G with BLF | 0 | - | - |
|
- |
| OpenStage 60 OpenStage 80 |
0, 1 or 2 | - | - |
|
- |
| OpenStage 60 G OpenStage 80 G |
0 or 1 | - | - |
|
- |
| OpenStage 60 G OpenStage 80 G |
2 | - | - | - |
|
TDM devices
| Device | ... with Key Modules |
powered by UP0/E |
External Power Unit |
|---|---|---|---|
| OpenStage 10 T | 0 |
|
- |
| OpenStage 15 T | 0 or 1 (paper) |
|
- |
| OpenStage 20 T | 0 |
|
- |
| OpenStage 30 T | 0 or 1 (paper) |
|
- |
| OpenStage 30 T with BLF | 0 | - |
|
| OpenStage 40 T | 0 or 1 (paper) |
|
- |
| OpenStage 40 T | 1 or 2 (display) | - |
|
| OpenStage 40 T with BLF | 0 | - |
|
| OpenStage 60 T OpenStage 80 T |
0, 1 or 2 (display) | - |
|
Power Supplies
| Usage | Region | Design[1] | Order No. |
|---|---|---|---|
| OpenStage family, optiPoint family | EU | SMPS | L30250-F600-C141 |
| OpenStage family, optiPoint family | UK | SMPS | L30250-F600-C142 |
| OpenStage family, optiPoint family | US | SMPS | L30250-F600-C143 |
| optiPoint 500 telephones | EU | linear | L30250-F600-A158 |
| optiPoint 500 telephones | UK | linear | L30252-F600-A580 |
| optiPoint 500 telephones | US | linear | L30250-F600-A580 |
- ↑ SMPS =
Switched-mode power supply / 
Schaltnetzteil
linear =
Linear regulator /
Spannungsregler
Wiring
| Power provision for an IP telephone in a LAN with PoE. | 
|
| Power provision for an IP telephone in a LAN without PoE. | 
|
|
In case you want to connect an IP device (OpenStage or optiPoint) to the power supply unit, it is only supported to have one device connected to the power supply unit! |
| Power provision for a TDM telephone (if necessary - see TDM phones in the Matrix table). | 
|
The OpenStage Phone Adapter always need a separate power supply.
Extended power management via LLDP-MED
Please have a look at the following Service Information: 
Service_Info_PoE
See also
- OpenStage - the portal page of the OpenStage telephone family
- OpenStage Training - easy learning to use your feature-rich enterprise phone
- OpenStage Manager - feature description of the PC application for OpenStage
- OpenStage power supply and PoE classes - required power supply and PoE classes of phones and accessories
- OpenStage Hardware Changes and necessary Software Versions - comparative table of supported hardware versions
- OpenStage Bluetooth - OpenStage 60/80 Bluetooth feature information
- OpenStage Accessories - Add-On devices, Adapters and Accessories
- OpenStage Main Navigation - comparative information about the main navigation elements
