OpenStage SIP Release Notes
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
The OpenStage 60 SIP and OpenStage 80 SIP Release Notes help you to find, in descending order:
- New implemented features
- Corrected bugs
- Known and still open issues (eventually with workarounds)
for each specific OpenStage SIP phone software version considered.
Contents
Software versioning / naming
A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:
V x[.y] R m.f.h
in which field:
- x[.y] denotes the Major release level
- m denotes the Minor release level
- f denotes the Fix release level
- h denotes the Hotfix level
This naming convention scheme does not imply any naming requirements for file / files available. |
More informations on the New Software Versioning scheme wiki page.
V1 R5.11.0
General information
What’s New?
- The existing local phone book can be substituted with an XML application
- The SIP retry after parameter (RFC 3261) is supported
- For better supporting survivability features of the HiPath 8000, also FQDN will be supported in SIP messages and routed correctly by the network
- The Busy Lamp Feature (BLF) for monitoring extension states is implemented according to the Asterisk implementation
- The keypad (1-9,*0#) can be used for direct input into XML application
- The following countries were added: Turkey
- The following languages were added: Indonesian, Malay, Brazilian Portuguese, Catalan, Estonian, American English, Latvian, Lithuanian, Romanian, Slovenian, Serbian, Greek, Bulgarian (Cyrillic), Macedonian (Cyrillic), Serbian (Cyrillic), Japanese (on OpenStage 20, 20E and 40 only)
- Support for LLDP-MED is introduced
- It is possible to start a configured XML application via FPK
- Some MWI enhancements (RFC 3842 and RFC 3265) were introduced
- The OpenStage Manager can upload and delete ringer tones to the phone
- The new FPK settings, introduced with V1R5, are supported by OpenStage Manager
- The name HiPath 8000 was replaced by OS Voice in the SIP server type menu (Admin->System->Registration->Sip session->Server type
- The default setting for LLDP-MED is now “ON”. As a result, the VLAN discovery method default is now “LLDP_MED discovered”.
- from V1R5.x on the user has to manually configure the device type which is connected to the headset port (via the "Settings --> User --> Audio --> Settings --> Headset socket"). It is important to set the parameter correctly to achieve the best voice quality. DECT Headsets have to be set to "Cordless headset", while the Wired headsets have to be set to "Wired headset". The third setting "Conference unit" is prepared to connect a conference unit from Konftel in the future (this will be released separately as soon as an appropriate cable is available from Konftel). Bluethooth headsets are not affected by this configuration parameter
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03716394 | display does not get updated after transfer | |
NA03636798 | not possible to activate server based call forwarding | |
NA03629202 | No DCSP value for RTP for RTCP Packets | |
NA03633420 | If you use the German language as menu language you are not able to see the failure code | |
NA03732809 | If you try to pick up a call via a DSS key, and you lift the handset short time after that you hear a strange sound in the handset | |
NA03745532 | no reaction on pressing FPK in clearing state | |
NA03746863 | OpenStage are sending no SNMP traps when they crash | |
NA03721342 | possible to change user password even is not allowed | |
NA03544186 | When playing a voice message via IppAssistant the phone switches from "Voice Mail" to "My Phone" (the connection to PLAYWAVE_ACCESS number is displayed) and it is necessary to press the "Mail" button in order to return to "Voice Mail" | |
NA03634065 | If you change the Openstage 80 SIP to warm grey, the display starts to flicker | |
NA03576524 | In the OpenStage20 SIP there is missing translation into finnish i.e. if you like to change destination in case of Call Forwarding | |
NA03576195 | When you are browsing help in OpenStage 60/80 SIP phone browsing will be stuck if you press arrow up in touchpad | |
NA03762919 | DSS key lighted up constantly, although the chiefs phone was idle | |
NA03770173 | The use of Backup and restore if BLF keys are configured will cause the phone to restart | |
NA03778879 | The phone is cutting on shifted (level 2) program key´s the first letters but on the level 1 (non shifted) he is cutting the letters corectly (at the end) | |
NA03763578 | Openstage 60 blockades related to the Keyset operation | |
NA03789927 | unable to consult after GPU notify cancelled | |
NA03790826 | After the successful login, the device overflows the H8K endlessly with Subscribe Messages | |
NA03679075 | No sign. if BLF call & inc. call at same time | |
NA03781654 | menu offers pickup call even no group call is available | |
NA03750813 | No busy tone on OpenStage SIP devices when country ?Poland? is selected | |
NA03827307 | After a prompt for a group call is shown on the screen of OS 20 which is bussy in call, it doesn't disappears after the call is taken from the respective PU group member | |
NA03788222 | Sporadically dial tone during the conversation. | |
NA03809997 | problems after activating the DLS security settings (secure mode) – no pin | |
NA03813566 | The phone was idle and did a reboot by itself | |
NA03731637 | OpenStage crashs while mobility logon-off | |
NA03829516 | Unable to logon with large extension. | |
NA03848137 | Openstage doesn't ring during Incoming call | |
NA03214353 | Openstage sending wrong CPL and CGP in QDC Traps | |
NA03696432 | timer for failing FTP transfer should be extened | |
NA03676170 | OpenStage is getting blocked after BLF configuration data are send to the Phone via DLS-protocol | |
NA03807728 | phone does not ring and cannot answer call | |
NA03816492 | phone crash after disconnect from call | |
NA03835712 | Openstage doesn't ring in specific scenario |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03706662 | After some time the headset connected to OpenStage stops functioning | |
NA03680160 | At customer side occur sporadically payload problems | |
NA03770733 | File Deployment with DLS to the Openstage sporadically not possible | |
NA03779310 | Problem with reregistration timer OS | |
NA03815921 | On the OS40 it comes to uncontrolled reboots when the PC port is activated after some time. (high sporadically) | |
NA03813310 | DN Name entry for LDAP-access cannot be entered in the OpenStage completely | |
NA03817800 | When a Openstage 40 is re-booted, 2 attempts at registration are made | |
NA03834557 | restart of OS 80, probably due to sidecar problem (high sporadically) | |
NA03834485 | When the headset isn't put on-hook after time the phonelet CallView is closed and the state of the phone returns to idle (ready) from user prospective. When a new call arrives in this state of the phone, the phone indicate it visually but without ringing | |
NA03841229 | * and # are ignorred if quickly pressed twice | |
NA03843425 | incoming call not indicated as forwarded | |
NA03837978 | phone continuously answer with 387 Busy Here (specific scenario) | |
NA03857815 | sporadically no way speechpath | |
NA03834857 | no reconnect after consultation, call was canceled | |
NA03853656 | problem with plug&play (too many data) | |
NA03863084 | phone freeze with long line/DSS label names | |
NA03860573 | Openstage 20 , not possible to exit Remote Trace menu with “Save&Exit” | |
NA03882515 | Feature toggle on FPK does not work after reboot |
V1 R4.23.0
General information
What’s New?
RQ Trademark License Reference Openstage
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03649991 | P&P does'nt work completely in conjunction with 802.1x | |
NA03698841 | phone freezes imediately after enabling TLS (specific configuration) | |
NA03726319 | sporadically OpenStage reboot when it's used via 3rd party application | |
NA03643538 | OpenStage fails to read DNS SRV Response | |
NA03649100 | Feature toggle doesn't work after mob. logon/off | |
NA03684968 | wrong call forwarding indication (primary line) | |
NA03669073 | Temporary a black bar appears behind the label of the sensor buttons on the display | |
NA03576524 | In the OpenStage20SIP there is missing translation into finnish i.e. if you like to change destination in case of Call Forwarding. | |
NA03674265 | Mobility, Unable to logon with large extension (more than 6 characters) | |
NA03692101 | Openstage 20, During a secure call, the padlock is cut off in the display | |
NA03613590 | Loudspeaker key accept second call | |
NA03770188 | Phones in the testing room rebooted without any external action | |
NA03774199 | Conf Controller Display Not Updated | |
NA03787552 | Sporadicly Openstage phones frozen without any visible reason | |
NA03763578 | Phone sporadicly freeze in keyset scenario |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03706662 | After some time the headset connected to OpenStage stops functioning | |
NA03716394 | display does not get updated after transfer | |
NA03730232 | unable to logon mobile user via mobility key (in a special scenario) | |
NA03636798 | not possible to activate server based call forwarding | |
NA03633420 | If you use the German language as menu language you are not able to see the failure code (Openstage 40) | |
NA03732809 | If you try to pick up a call via a DSS key, and you lift the handset short time after that you hear a strange sound in the handset | |
NA03745532 | no reaction on pressing FPK in clearing state | |
NA03746863 | OpenStage are sending no SNMP traps when they crash | |
NA03721342 | User can change User Password via WBM even these feature is locked in DLS | |
NA03762919 | sporadically the dss key to phone A was lighted up constantly, although the phone A was idle | |
NA03770188 | Phone reboot without any external action | |
Blind transfer failed if the target is a hunt group and two calls are present at phone | ||
NA03680160 // NA03507513 | sporadically payload problems | |
NA03731637 | Sporadically reboot of Openstage when using mobility logon/logoff | |
NA03758260 | Diplay of OS 20 only shows the name of the caller and not the number if a call is forwarded to it | |
NA03778879 | The phone is cutting on shifted (level 2) program key?s the first letters but on the level 1 (non shifted) he is cutting the letters corectly (at the end) | |
NA03788043 | OpenStage terminal devices are becoming slow. Entries are displayed with delay from up to 5 seconds. | |
NA03789927 | unable to consult after GPU notify cancelled | |
NA03790826 | Openstage overflows the H8K endlessly with Subscribe Messages YES | |
NA03699887 | OpenStage 60 doesn't ring | |
NA03813566 | OpenStage self reboot | |
NA03770733 | File Deployment with DLS to the Openstage sporadically not possible | |
NA03807728 | Phone does not ring and cannot answer call | |
NA03809997 | DLS secure mode, security state pending | |
NA03814615 | Unable to pick up second line. | |
NA03815640 | Missing internal ringback tone | |
NA03816492 | Phone crash after disconnect from call | |
NA03576195 | When you are browsing help in OpenStage 60/80 SIP phone browsing will be stuck if you press arrow up in touchpad. | |
NA03805418 | Sporadicly HuntMakeBusy is toggling on its own |
V1 R4.21.0
General information
What’s New?
-
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03649991 | since version V1 R4.19 P&P does'nt never work completly. | |
NA03681080 | PhoneletLauncher callview.phd is hosed | |
NA03625955 | The automatic daylight saving is disabled after reset | |
NA03643538 | OpenStage fails to read DNS SRV Response | |
NA03640794 | After switchover from Proxy to HiPath8000 the line gets subscribed but thereafter one Notify is missing. | |
NA03677281 | The subscriber is logged on as a mobility user (morning). Few hours later he remarked that the phone didn't
react anymore and perform a restart by plugging off the cable. | |
NA03638133 | It happens sporadically that OpenStage devices reboot during operation or after a DLS-Mobility-User login | |
NA03640168 | During the start up the OpenStage is sending its name several times (exactly 3 times) with the "DHCP-Option 12 Hostename". | |
NA03686065 | After deploying the template to the phone the DLS create a job with the right settings. We can see on the phone two times remote administration and then the phone makes a restart | |
NA03673547 | During unlocking of the Openstage 60, the phone sporadically reboots) | |
NA03584905 | In the Openstage 40, in the menue Forwarded Calls, it is not possible to scroll down completely in the detail view if more than 6 calls have come in. Therefore, the detail information for the last two entries are not visible anymore. | |
NA03650947 | NTP server is configured, user tries to change the daylight saving option and the page loads very slowly | |
NA03667590 | Keymodul light is on when pixelsaver is active | |
NA03608980 | Cannot do LDAP lookups from OS80 phone | |
NA03634065 | If you change the Openstage 80 SIP to warm grey, the display starts to flicker. | |
NA03576195 | When you are browsing help in OpenStage 60/80 SIP phone browsing will be stuck if you press arrow up in touchpad. |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03680160 | sporadically payload problems (halfpaths) | |
NA03700080 | Problems with call transfer/local conference on E/A phones | |
NA03698841 | TLS/SRTP not working when using DNS-SRV - Phones freeze | |
NA03507513 | Sporadically we do not have payload since the upgrade of OS SIP to V1R4.14. | |
NA03636798 | not possible to activate server based call forwarding | |
NA03629202 | OpenStage 40 (maybe all kinds of OpenStage phones) does not use the configured DSCP value for RTP for RTCP packets | |
NA03649100 | Feature toggle doesn't work after mob. logon/off | |
NA03633420 | If you use the German language as menu language you are not able to see the failure code. (OS 40) | |
NA03684968 | Now it appears again, that the LED continues to blink when the redirection gets deactivated, and it blinks until the first conversation is in the course | |
NA03456210 | No speechpath between h8k phone and h4k phone | |
NA03699887 | OpenStage 60 doesn't ring | |
NA03698584 | phones does still work even TLS certificate is not valid anymore | |
NA03669073 | When OS40 appears behind the label of the sensor buttons on the display a black bar. | |
NA03576524 | In the OpenStage20SIP there is missing translation into finnish i.e. if you like to change destination in case of Call Forwarding. | |
NA03674265 | We checked that when we passed a number of 2, 3 , 4 or 5 digits, the prefix 3314059 is correctly added before the
number. But when we passed more digits (6 or more), the prefix were not added. | |
NA03692101 | Stage 20 SIP/ During a secure call, the padlock is cut off in the display | |
NA03699787 | When the agent answers the call he can hear the caller but the caller can not hear the agent so there is a problem with the payload. |
V1 R4.19.0
General information
What’s New?
The following language is now supported: Turkish
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03576294 | phone crash during clock update | |
NA03518157 | After deployment to the latest software version some phones hang while booting. | |
NA03515329 | phones do not start to work after Plug&Play | |
NA03518812 | wrong audio(group pickup) settings after reboot | |
NA03549354 | OS Mobility GroupPickup endless ringing | |
NA03421740 | Logging off a mobility user during a Call-Pickup notification for the mobility users Pickup- Group causes the OpenStage phone to crash and to reboot afterwards | |
NA03531183 | OpenStage60 software is not installed at the first attempt when using Windows ftp-server | |
NA03480918 | Faulty display indication by a call to a subscriber with AUL external. | |
NA03559270 | If you active the server based call forwarding manual via access key (like *44XXXXX) the phone will not display the call forwarding on the screen | |
NA03580221 | Only name indication (large conference) | |
NA03507510 | When you goes offhook then see you a Popup "Please Dial". Over and under the "Please Dail" you see 2 little lines and this lines are to flicker. | |
NA03523007 | Popup appears with "Number unavailable" for half of second when call forwarding | |
NA03560552 | In English you can "Accept" a call. You can also "Accept" a call forwarding activation. We notice that the same word is used for both actions.
In Dutch however it is difficult to find ONE correct word for these 2 actions | |
NA03602198 | We have set the Backlight Timeout value in the menu Energy Saving be 2 hours, when we then expect the display to dim and go dark after not being used for that period of time. OS40 Administrator Pages --> Local Functions --> Energy Saving --> Backlight Timeout | |
NA03357307 | Customer hears 2 ring tones on Openstage SIP phone when a call is going from Openstage->8K->4k->GSM network | |
NA03589238 | The user from OpenStage80 (extension 2607-IP172.28.90.6) makes an external outgoing call via gateway RG8700 CAS to external number, receives two ring back tone (problem), one from PSTN and another one generated by extension. |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03572647 | os ignore gateway configuration | |
NA03499348 | DLS-Mobility Logout on OpenStage destroys the Windows User Profile that has been saved on the Server. | |
NA03507513 | Sporadically we do not have payload since the upgrade of OS SIP to V1R4.14 | |
NA03466207 | Connection terminated immediately after connecting with OS80 and OS60. | |
NA03525728 | phone does auto answer second call | |
NA03456210 | No speechpath between h8k phone and h4k phone | |
NA03491173 | phone connected and dropped after 1 - 2 minutes | |
NA03584905 | In the Openstage 40, in the menue Forwarded Calls, it is not possible to scroll down completely in the detail view if more than 6 calls have come in. Therefore, the detail information for the last two entries are not visible anymore. | |
NA03238403 | Documentation wrong for MCT (malicious call tarce) | |
NA03576524 | In the OpenStage20SIP there is missing translation into finnish i.e. if you like to change destination in case of Call Forwarding. | |
NA03214353 | That means all traps are grey instead of green or red. The operator do not have quick overview about voice quality and he has to open every trap and check it. | |
NA03582293 | problem with group pickup indication | |
NA03589019 | problems with headsets (noise in the background) | |
NA03576195 | When you are browsing help in OpenStage 60/80 SIP phone browsing will be stuck if you press arrow up in touchpad. | |
NA03614404 | Problem when Conference is initiated, you need 2 hang on to be disconnected from a Conference | |
NA03613550 | OS no incomming call possible after Network disconecction | |
NA03581396 | wrong date in display (but the time is correct) | |
NA03608980 | Cannot do LDAP lookups from OS80 phone | |
NA03607343 | no auto answer of some line keys |
V1 R4.17.0
General information
What’s New?
Nothing
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03522034 | No CFW indication after Mobility logoff and logon. | |
NA03501661 | display mode does not switch back to normal mode | |
NA03507524 | Openstage to H8k sorts entries in the Call Journal "Dialled" incorrectly, if you call to the CO-trunk and the CO-trunk transfers a name. | |
NA03480930 | The field Trace Timeout remains empty by a query of the settings of DLS performed by OpenStage through a LocalChange query, which causes that the default value of 60 min is set in the OpenStage by setting of the Trace level through the DLS. | |
NA03525728 | in case of fast dialing of digits on the Openstage, some of the digits are lost. This error is observed only with the key sets. You can see in the trace that the digit 2 was dialed three times, but the digit 2 was send only twice to H8K. | |
NA03489153 | the default value on openStage for VLAN-ID is "NULL" not "0". | |
NA03484366 | Customer uses phone lock via # key, feature works but when he tries to unlock the phone strange display information appears. | |
NA03492225 | DLS permits no processing in the menu "IP Device/ IP Phone Konfiguration/ Feature" if the value of "Call related users Settings/ Hold reminder" was not set between 3 and 15. But this is wrong, it is also possible to set 1 minute at the Openstage | |
NA03512982 | Feature Group Pick up does not work if Backup registrar is no available | |
NA03515485 | After updating the phones to V1 R4.14.0 no message to DLS after phone reboot | |
NA03494477 | display "unavailable" when dialing out of missed call, dialed call and received call list | |
NA03466776 | Feature "locked local function's -> Phone lock" does not work with OS40/80 | |
NA03503779 | Wrong Display when unlock OpenStage Phone OpenStage 40 V4.14.0 There is a wrong text "MenuCF.gUPPCs.UnlockPhone..." displayed when you try to unlock the phone. | |
NA03447341 | MWI: phone does not show number of unread messages | |
NA03450591 | restarts OS 40 | |
NA03529877 | After the upgrade from R4.7.3 to R4.11.0 there are still reboots | |
NA03503447 | Phone reboots the 2nd time today.In the attachement is the trace file from the phone. But there is no core dump because the phone didn´t create a core dump! | |
NA03479146 | Customer complains that the OpenStage phone is too slow, when you want to go in consultation. / OpenStage V1.0R3.13.0 / A (OS80) / B (OS60) / A calls B, B accepts the call, B presses "Ruckfrage" ("consultation") and tries to enter immediately a new number, this can be done only after waiting 1-3sec., until the pop-up with "please dial" appears, otherwise the first entered digits get swallowed | |
NA03409840 | Behaviour of OpenStage40 SIP V1 R4.7.3 to Windows DHCP is different as written in Documentation | |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03306549 | wrong display info on incoming call on WP1 | |
NA03515329 | After that the software-deployment and the configuration, done by the DLS, expire automaticaly, but the phones do not start to work afterwards | |
NA03518812 | When the OpenStage phones are resettet via the DLS, it appears sporadically, that the parameter "Use Ringer Tone for Group Pickup " in the audio settings is changed to active ,although this parameter was deactivated before the restart. | |
NA03480918 | Faulty display indication by a call to a subscriber with AUL external. | |
NA03357307 | Customer hears 2 ring tones on Openstage SIP phone when a call is going from Openstage->8K->4k->GSM network. | |
NA03518157 | After deployment to the latest software version some phones hang while booting. | |
NA03527276 | when the user uses the shift key on key number 6, the display changes to the second level, but the LED from the shift key is not switch on !! | |
NA03507513 | Sporadically we do not have payload since the upgrade of OS SIP to V1R4.14 | |
NA03507510 | When you goes offhook then see you a Popup "Please Dial". Over and under the "Please Dail" you see 2 little lines and this lines are to flicker. | |
NA03491173 | phone connected and dropped after 1 - 2 minutes | |
NA03523007 | Popup appears with "Number unavailable" for half of second when call forwarding | |
NA03530673 | Subscriber 72011 (Hunting group) is called and managed by the hunting group to the member 72018. The caller gets a busy ton and on the dispaly of the caller comes "separate". The caller phone doesn't follow the CFU to the phone 72012. | |
NA03456210 | No speechpath between h8k phone and h4k phone | |
NA03421740 | Logging off a mobility user during a Call-Pickup notification for the mobility users Pickup- Group causes the OpenStage phone to crash and to reboot afterwards. This problem also occurs on Open Stage 80 and is reproducible | |
NA03563780 | OpenStage 40 SIP phones restarts after upgrade from V1R3.10.0 to V1.R4.14.0. We have 1600 OpenStage phones from 100 pieces are 2-3 affected. On the Display we can see "Application starting" and thereafter the device restarts. | |
NA03549354 | OS Mobility GroupPickup endless ringing | |
NA03559270 | If you active the server based call forwarding manual via access key (like *44XXXXX) the phone will not display the call forwarding on the screen | |
NA03563010 | Then the phone shows an incoming call at the display but it does not ring | |
NA03560552 | In English you can "Accept" a call. You can also "Accept" a call forwarding activation. We notice that the same word is used for both actions. In Dutch however it is difficult to find ONE correct word for these 2 actions. | |
NA03544186 | When playing a voice message via IppAssistant the phone switches from "Voice Mail" to "My Phone" (the connection to PLAYWAVE_ACCESS number is displayed) and it is necessary to press the "Mail" button in order to return to "Voice Mail" | |
NA03499348 | DLS-Mobility Logout on OpenStage destroys the Windows User Profile that has been saved on the Server. | |
NA03531183 | OpenStage60 software is not installed at the first attempt when using Windows ftp-server | |
NA03534941 | during making a call -> no ringing ton on the loudspeaker |
V1 R4.14.0
What’s New?
ID | Title | Summary |
---|---|---|
RQ00025797 | G.729 parameter set needs to be implemented | New parameter set implemented (this was already done for optipoint) |
Openstage 20E support | The software is ready to support the OpenStage 20E hardware | |
File size limit | New functionality prevents downloading of the following file types to an openStage phone if they are too large, or in the case of the sound files have invalid contents | |
Gigabit Ethernet Support | The software is ready to support the Gigabit Ethernet phone hardware (full duplex only). | |
Remote Tracing | Remote tracing via syslog protocol was introduced. (Admin -> Maintenance -> Remote trace) | |
Turn off the backlight | The backlight is turned off when the phone is not used over a longer time to increase MTBF of the CCFL tube and the backlight inverter | |
Improvements to Touchguide Performance | The touchguide wheel resolution is configurable (User –> Phone -> Display -> Touchguide setting) | |
Display of large conference members | The members of a large conference are shown at the phone display | |
SRTP | The speech data between two SRTP enabled phones will be encrypted | |
Display of Name in Repeat Dialing list | Call progress prompts will be updated as different call party identity information is provided during call progress.
The Redial option on the dialer prompt will show the originally called party identity from the latest Call Log dialed entry (in chronological order). |
Fixed Bugs
ID | Summary |
---|---|
NA03323773 | OS gets stuck in conjunction with Asterisk |
NA03423556 | The Openstage Phones get the time server communicated from DLS |
NA03443563 | failure on forced remote logoff of mobile user |
NA03383743 | wrong number in forwarded call log list |
NA03321133 | sometimes the first ring is very loud |
NA03417123 | SUBSCRIBE Request not sent to Outbound Proxy (Comdasys), but directly to Registrar |
NA03459650 | Phone reboots by itself after failed call attempt |
NA03399301 | Keylock applies to the Admin, The blockage over dan DLS should only influence the "Userzugang" on Openstage and not "Admin |
NA03358707 | Consultation set to key behaves different than the function Consultation in the menu. |
NA03248832 | Subscriber got released after trying to make a Calltransfer/Retrieve held call |
NA03406856 | OS40 phone locks up when call is xfered using GAD |
NA03377136 | problems with automatic dial delay value in WBM/phone menu |
NA03432648 | Sporadicaly the OpenStage 60 and 80 are blocking. In this case the number keyboard doesn' t work (0 - 9, *, #). |
NA03438454 | T40B wrong display notification in call progress |
NA03440654 | Mobility: problems with mobile logon while server based call forward is activated |
NA03410355 | Problem with feature mobility and DLS when user is starting registration only with subscriber ID |
NA03468003 | Sporadically the previously dialled number is displayed for some seconds for outgoing calls over gateways, which is very confusing for the users |
NA03464505 | Display Updates that have been sent from H8K to OptenStage Phone are not accepted on the OpenStage, this means that only the first Display Update after the Connect is working. |
NA03381302 | wrong display notification in call progress |
NA03423556 | the clock on the phones is slow. The Openstage Phones get the time server communicated from DLS. The phones retrieve the clock time via NTP after the boot procedure |
NA03443563 | failure on forced remote logoff of mobile user |
NA03383743 | wrong number in forwarded call log list |
NA03321133 | sometimes the first ring is very loud |
NA03417123 | SUBSCRIBE Request not sent to Outbound Proxy (Comdasys), but directly to Registrar |
NA03459650 | Phone reboots by itself after failed call attempt |
NA03399301 | Keylock applies to the Admin, The blockage over dan DLS should only influence the "Userzugang" on Openstage and not "Admin". |
NA03358707 | Consultation set to key behaves different than the function Consultation in the menu. |
NA03248832 | Subscriber got released after trying to make a Calltransfer/Retrieve held call |
Known & Open Issues
ID | Summary | Workaround |
---|---|---|
NA03306549 | wrong display info on incoming call on WP1 | |
NA03214353 | OS sending wrong CPL and CGP in QDC Traps | |
NA03274453 | empty CallPickup Indication | |
NA03447334 | sporadically phone does not reply to an INVITE message | |
NA03473474 | OS40 dialing / ringing / handling temporary slow down dramatically | |
NA03471244 | Several reboots of phone. The phone rebooted several times during the last few days without any good reason | |
NA03472259 | Phone 496222825867 ist not finding per DLS. connection per wbt is ok. this happens every time after a hardware change of a phone | |
NA03472288 | in case of fast dialing of digits on the Openstage, some of the digits are lost. | |
NA03466776 | Feature "locked local function’s -> Phone lock" does not work with OS40/80 | |
NA03357307 | Customer hears 2 ring tones on Openstage SIP phone when a call is going from Openstage->8K->4k->GSM network. | |
NA03447341 | MWI: phone does not show number of unread messages | |
NA03421740 | Logging off a mobility user during a Call-Pickup notification for the mobility users Pickup- Group causes the OpenStage phone to crash and to reboot afterwards | |
NA03484358 | phone does auto answer group pickup call | |
NA03480930 | The field Trace Timeout remains empty by a query of the settings of DLS performed by OpenStage through a LocalChange query | |
NA03481234 | If you login or logout with the mobility key to the DLS, the OpenStage sends a localChange query to DLS , whereby this starts a job by quering all the settings of the OpenStages | |
NA03478327 | Reboots of OS 60 SIP | |
NA03479146 | Customer complains that the OpenStage phone is too slow, when you want to go in consultation | |
NA03477881 | phone not registering in dns srv scenario | |
NA03306549 | wrong display info on incoming call on WP1 |
V1 R3.13.0
General information see ???
What’s New?
Nothing
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03380992 | Phone reboot during scan via DLS | |
NA03401729 | reboots V1R3.10.0 and OS 20 | |
NA03406856 | phone locks up when call is xfered using GAD | |
NA03108715 | Several errors in dutch user interface | |
NA03380999 | phone sends BYE after failing consult | |
NA03424344 | KeyModule no line key registering | |
NA03341531 | group pickup key does not flash | |
NA03360240 | error in the Dutch user interface | |
Known & Open Issues
ID | Cluster | Summary |
---|---|---|
NA03423556 | clock on the phones is slow, no SNTP | |
NA03408787 | the user can see the list of missed calls but he can not step down to each entry of missed calls.Even the "Option -> delete all" does not operate any more. The arrow navigation buttons (touch guide) had no more functions in the calling list. | |
NA03411530 | OS60 (V1 R3.10.0) with ext. 1279 has time deviations of about 3 ... 4 minutes per week. | |
NA03432699 | incoming call makes dial popup fade out | |
NA03383743 | wrong number in forwarded call log list | |
NA03321133 | If the extension 409 was called, sometimes the first ring is very loud, although the loudness is configured "normal". The second ring than is "normal". The OpenStage is a keyset and a member of a pickup-group | |
NA03306549 | wrong display info on incoming call on WP1 | |
NA03417123 | SUBSCRIBE Request not sent to Outbound Proxy (Comdasys), but directly to Registrar | |
NA03399301 | Keylock applies to the Admin, The blockage over dan DLS should only influence the "Userzugang" on Openstage and not "Admin". | |
NA03358707 | Consultation set to key behaves different than the function Consultation in the menu. | |
NA03248832 | Subscriber got released after trying to make a Calltransfer/Retrieve held call | |
NA03214353 | That means all traps are grey instead of green or red. The operator do not have quick overview about voice quality and he has to open every trap and check it. | |
NA03274453 | empty CallPickup Indication |
V1 R3.12.0
General information see ???
What’s New?
Nothing
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03326518 | Phone rebooted itself | |
NA03184333 | Signaling of incoming call at Plantronics CS60 is wrong | |
NA03300981 | Pickup call logged in wrong call log list | |
NA03315117 | Incomming and outgoing call no transfer on hangup | |
NA03282922 | CSTA Reboot with OpenStage V1 R3.7.0 (Com Asssitant ) | |
NA03354555 | Missing line name in popup after registration | |
NA03230588 | No ringback tone during blindtransfer | |
NA03274467 | OpenStage V1 R3.7.0 Redial 2 times in Display if busy during... | |
NA03358707 | Consult FPK does not work properly | |
NA03182233 | Problems with DNS Server | |
NA03182233 | Line Reservation problems while H8K shutdown |
Known & Open Issues
ID | Workaround | Summary |
---|---|---|
NA03321133 | If the extension 409 was called, sometimes the first ring is very loud, although the loudness is configured "normal". The second ring than is "normal". The OpenStage is a keyset and a member of a pickup-group | |
NA03380992 | Phones reboot when HiPath DLS tries to scan, tries to read phone configuration or tries to change phone settings | |
NA03108715 | Several errors in dutch user interface of the OpenStage phone | |
NA03341531 | Group pickup key does not flash | |
NA03360240 | Wrong text on OpenStage for "Exit Conference" | |
NA03248832 | Subscriber got released after trying to make a Call Transfer / Call Retrieve of an held call | |
NA03214353 | OS sending wrong CPL and CGP in QDC Traps | |
NA03316374 | Wrong name displayed in group pickup popup | |
NA03394554 | Dialling keypad was blocked | |
NA03401729 | OpenStage 20 SIP V1 R3.10.0 reboots | |
NA03408787 | Even the "Option -> delete all" does not operate any more. The arrow navigation buttons (touch guide) had no more functions in the calling list | |
NA03411530 | OpenStage 60 SIP V1 R3.10.0 with extension number 1279 has time deviations of about 3 or 4 minutes per week | |
NA03410294 | The digit keypad of an OpenStage 40 phone seemed to be out of service | |
NA03383743 | Wrong number in forwarded call log list | |
NA03136554 | OpenStage phones aren't updating the time at all |
V1 R3.7.0
General information see ???
What’s New?
ID | Cluster | Title | Summary |
---|---|---|---|
RQ00024504 | ... | Enhancement of Plug&Play for OpenStage SIP Phones | ... |
Fixed Bugs
ID | Cluster | Summary |
---|---|---|
NA03126457 | ... | No Display Information during update |
NA03207558 | ... | group pickup fails |
NA03216228 | ... | phone did not ring on incoming call |
NA03220272 | ... | OS crash after pressing DDS-key 3 times quickly |
NA03196254 | ... | No Payload-after LS ON/OFF Payload OP |
NA03230503 | ... | Backlight on second key module is always off |
NA03236187 | ... | Failed to hold 4-party conference via CA(openSt) |
NA03187904 | ... | Call can not be finished |
NA03191250 | ... | Disconnection while switching |
NA03177332 | ... | ClearConnection Response from the OpenstagePhone |
NA03197510 | ... | OS crash after logo transfer |
NA03228553 | ... | server based call forwarding fails sporadically |
NA03182233 | ... | Problem with node separation/node down |
NA03246026 | ... | DSS Key/ Disconnect / Redial problem |
NA0319325 | ... | Silent Supression Flag in signalling always present |
NA03236510 | ... | WBM problem with trace information side |
NA03153254 | ... | Differences in DLS and phone (repertory dial key) |
NA03275484 | ... | the call does not ring on the agents phone after the previous call is handled using HPPC-agent application. There is the optical signalling of incomming call only. |
NA03159751 | ... | If the "Shift" button is pressed then the led besides the "Mobility"button remains on and the led of the "Shift" button is off |
NA03275480 | ... | Dialling of destination number not possible when the OS is in "consult" state |
NA03212447 | ... | repeat dialling causes crash and reboot |
NA03296902 | ... | Openstage upgrade failed |
Known & Open Issues
ID | Summary | Workaround |
---|---|---|
... | ... | ... |
See also
- OpenStage - the portal page of the OpenStage telephone family
- OpenStage Training - easy learning to use your feature-rich enterprise phone
- OpenStage Manager - feature description of the PC application for OpenStage
- OpenStage power supply and PoE classes - required power supply and PoE classes of phones and accessories
- OpenStage Hardware Changes and necessary Software Versions - comparative table of supported hardware versions
- OpenStage Bluetooth - OpenStage 60/80 Bluetooth feature information
- OpenStage Accessories - Add-On devices, Adapters and Accessories
- OpenStage Main Navigation - comparative information about the main navigation elements