optiPoint adapters
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
optiPoint adapters can be plugged-in on the bottom side (option bays) of the optiPoint phones.
| Phone family | Phone type | Number of option bays |
|---|---|---|
| optiPoint 410/420 standard S | SIP | 2 |
| optiPoint 410/420 advance S | SIP | 1 |
| optiPoint 410/420 standard | CorNet IP | 2 |
| optiPoint 410/420 advance | CorNet IP | 1 |
| optiPoint 500 basic/standard | TDM | 1 |
| optiPoint 500 advance | TDM | 2 |
Refer also to 
Installation instructions for accompanying equipment, adapters and accessories.
Contents
optiPoint recorder adapter
This adapter is used for connecting a second handset or for connecting an external recorder (Note: There is also a centralized recording solution supported).
Applicability
optiPoint acoustic adapter
This adapter allows the following telephone accessories to be connected:
- Active loudspeaker
- Desk microphone connected via a Y cable
- Corded headset (121 TR9-5) or
- Cordless headset (121 TR 9-5) with the call acceptance/end call function of a mobile unit
Applicability
optiPoint analog adapter
The analog adapter enables you to connect an additional telephone, fax machine, modem (e.g. a PC with an integrated modem card) or an answering machine with an analog interface and DTMF dialing.
Applicability
optiPoint ISDN adapter
The ISDN adapter is used to provide the ISDN S0 basic access for S0 terminals.
Applicability
optiPoint phone adapter
The phone adapter enables you to connect a second optiPoint telephone without having to use a special cable.
Applicability
