Views

Difference between revisions of "optiPoint 410/420 Release Notes"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (Added reference to V5 R5.10.0 Application Software version recently released.)
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
{{Discontinued|en|Devices}}
 +
 +
 
== Overview ==
 
== Overview ==
 
optiPoint V5.1 was released to market in March 2005.<br/>
 
optiPoint V5.1 was released to market in March 2005.<br/>
Line 24: Line 27:
  
 
== V5 ==
 
== V5 ==
 +
 +
=== V5 R6.6.0 ===
 +
Back to [[optiPoint 410/420|optiPoint 410/420 product page]].
 +
 +
'''What’s New?'''
 +
 +
{| {{DefaultTable}}
 +
! Summary
 +
|- 
 +
|
 +
|}
 +
 +
'''Fixed Bugs'''
 +
 +
{| {{DefaultTable}}
 +
! Summary
 +
|-
 +
| Optipoint 420 Eco Problems freezing
 +
|-
 +
| test-interface checks 6 digits of password only
 +
|-
 +
| Decline Massage wit GW IP triggers DHCP-Snooping
 +
|-
 +
| Wrong telephone event causes phone restart with RFC2833 flag
 +
|-
 +
| SSL medium strength cipher suites supported
 +
|}
 +
 +
'''Known & Open Issues'''
 +
 +
{| {{DefaultTable}}
 +
! Summary
 +
! Workaround
 +
|-
 +
|
 +
|
 +
|}
 +
 +
 +
=== V5 R6.3.0 ===
 +
Back to [[optiPoint 410/420|optiPoint 410/420 product page]].
 +
 +
'''What’s New?'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
|-
 +
|
 +
|
 +
|
 +
|}
 +
 +
'''Fixed Bugs'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
|-
 +
| NA04371927
 +
|
 +
| Wrong IP used for renew of IP in Vlan
 +
|-
 +
|
 +
|
 +
|
 +
|-
 +
|
 +
|
 +
| 802.1x - phone crashing through malformed eap packet
 +
|-
 +
|
 +
|
 +
|
 +
|-
 +
| NA04332923
 +
|
 +
| Half path after DTMF sent from hfa and camp on
 +
|-
 +
| NA03542395
 +
|
 +
| Intermittently unable to transfer calls
 +
|-
 +
| NA04003071
 +
|
 +
| Reboot after Qualys Guard scan.
 +
|}
 +
 +
'''Known & Open Issues'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
! Workaround
 +
|-
 +
|
 +
|
 +
|
 +
|
 +
|}
 +
 +
 +
=== V5 R6.1.0 ===
 +
Back to [[optiPoint 410/420|optiPoint 410/420 product page]].
 +
 +
'''What’s New?'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
|-
 +
| RQ00027702
 +
|
 +
| optiPoint 4x0 replacement of displaycontroller
 +
|}
 +
 +
'''Fixed Bugs'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
|-
 +
|
 +
| H59758
 +
| New display controller show Problem at idle state
 +
|}
 +
 +
'''Known & Open Issues'''
 +
 +
{| {{DefaultTable}}
 +
! ID
 +
! MR ID
 +
! Summary
 +
! Workaround
 +
|-
 +
| NA03901093
 +
|
 +
| Template SMNP does not  work with Plug&Pay
 +
| Manual supplaying of the template after Plug & Play
 +
|}
  
 
=== V5 R5.10.0 ===
 
=== V5 R5.10.0 ===
Line 1,242: Line 1,390:
 
| G63158
 
| G63158
 
| USA: Limitation on number of VoIP calls<br/>
 
| USA: Limitation on number of VoIP calls<br/>
−
The number of internal call records that can be maintained has been increased from 3 to 5. This change is relevant for H2k, H3k, H5k only. Default RTP/UDP port range has to be extended. See current  [https://netinfo3.icn.siemens.de/icnen/hs/d/PortUsDB Used Ports database] (Siemens internally only).
+
The number of internal call records that can be maintained has been increased from 3 to 5. This change is relevant for H2k, H3k, H5k only. Default RTP/UDP port range has to be extended.  
 
|-
 
|-
 
|}
 
|}

Latest revision as of 14:03, 17 December 2014

The support for this product has been discontinued!
Please visit Devices to get further information about the current product portfolio.


Overview

optiPoint V5.1 was released to market in March 2005.
Major enhancement is the introduction of confidentiality (SRTP Payload encryption) in this release.

See also optiPoint 410/420 V5.1 information.

Software versioning / naming

A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:

V x[.y] R m.f.h

in which field:

  • x[.y] denotes the Major release level
  • m denotes the Minor release level
  • f denotes the Fix release level
  • h denotes the Hotfix level


This naming convention scheme does not imply any naming requirements for file / files available.


More informations on the New Software Versioning scheme wiki page.

V5

V5 R6.6.0

Back to optiPoint 410/420 product page.

What’s New?

Summary

Fixed Bugs

Summary
Optipoint 420 Eco Problems freezing
test-interface checks 6 digits of password only
Decline Massage wit GW IP triggers DHCP-Snooping
Wrong telephone event causes phone restart with RFC2833 flag
SSL medium strength cipher suites supported

Known & Open Issues

Summary Workaround


V5 R6.3.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
NA04371927 Wrong IP used for renew of IP in Vlan
802.1x - phone crashing through malformed eap packet
NA04332923 Half path after DTMF sent from hfa and camp on
NA03542395 Intermittently unable to transfer calls
NA04003071 Reboot after Qualys Guard scan.

Known & Open Issues

ID MR ID Summary Workaround


V5 R6.1.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00027702 optiPoint 4x0 replacement of displaycontroller

Fixed Bugs

ID MR ID Summary
H59758 New display controller show Problem at idle state

Known & Open Issues

ID MR ID Summary Workaround
NA03901093 Template SMNP does not work with Plug&Pay Manual supplaying of the template after Plug & Play

V5 R5.10.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
H59550 Payload packet size on an Opti410 has no effect with G.711u
H56821 APM: ENB don't stop after key press
NA03778763 H57333 HiPath DLS interworking with V5 R5.7.0 doesn't work

Known & Open Issues

ID MR ID Summary Workaround
H55216 Mobile HFA: Relogon after power off with home number

V5 R5.8.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00027936 H48502 Trademark License Reference optiPoint part II

Fixed Bugs

ID MR ID Summary
NA03620506 H48065 Problem with DHCP Decline Massage from Phone
NA03256556 H34913 Wrong Jitter is shown after a rendom time
NA03481033 On H3K mobile HFA dosen't work with V 5 R5.x.x

Known & Open Issues

ID MR ID Summary Workaround
RQ00027597 H42926 Factory Reset via DLS manual factory restore over WBM or Phone

V5 R5.6.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00027936 H45716 Trademark License Reference optiPoint part I

Fixed Bugs

ID MR ID Summary
NA03330043 H33343 Switch Port deactivated because of mirrored STP
NA03531527 H44191 OP 410/420 doesn't get the VLAN ID from DHCP
NA03523656 H44192 After finish of call blank display appears
NA03572050 H45412 Phone make a reboot after DTMF send
NA03597662 H46123 US-H4K DMC-Call with alaw instead of ulaw
NA03580266 H46558 Password can not be deleted via DLS

Known & Open Issues

ID MR ID Summary Workaround
... ... ... ...

V5 R5.2.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
NA03073143 H20599 AGP: Exception Reboot permanent push
NA03136951 H24602 APM Software upgrade over DLS
NA03146851 H26688 WAP favorits are not saved
NA03216283 H27480 Bad payload quality with dmc calls
NA03081020 H29237 802.1x EAPOL Authentication fails.

Known & Open Issues

ID MR ID Summary Workaround
NA03291202 H32924 halfway payload on receiving changed SSRC
NA03330043 H33343 Switch Port deactivated because of mirrored STP

V5 R4.6.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ 26067, 26068 EAPOL-Logoff without certificates

Fixed Bugs

ID MR ID Summary
NA03136951 H24602 APM Software upgrade over DLS
NA02981769 H27513 Only 14 of 15 digits are dialed over the ENB
NA03216283 H27480 Bad payload quality with dmc calls
NA03105141 H23773 distorted payload on one extention

Known & Open Issues

ID MR ID Summary Workaround
NA03146851 H26688 WAP favorits are not saved
NA03073143 H20599, H20368, H20367 AGP Problems
NA03200638 H25823 HNFSporadically OptiPoint 420 standard is blocking
NA02121417 G85617 Spoardically no answer on headset possible
NA03012544 H19428 Phone freeze at "analysing cable"

V5 R4.5.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
NA03106562 H21591 SNMP Activation from the DLS to the phone doesn't
NA02939603 H20458 After the network is lost, the ENB-data is lost
NA02981769 H20144 ENB Dialing with 15digit Numbers are not function
NA02956764 H19722 can not post dial DTMF from IP phones to
NA02945506 H18721 no connection with IP-Phone behind firewall

Known & Open Issues

ID MR ID Summary Workaround
NA03146851 H26688 WAP favorits are not saved
NA03073143 H20599, H20368, H20367 AGP Problems
NA03136951 H24602 APM Software upgrade over DLS
NA02121417 G85617 Spoardically no answer on headset possible
NA03012544 H19428 Phone freeze at "analysing cable"
NA02894061 H17589 delay at ringing by a pickup Group

V5 R4.4.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
NA03091973 H20504 Wrong time Stamp at the WBM
NA02894061 H17589 Delay at ringing by a pickup Group
NA02635135 H16250 Changing the H.225_CS is not working
NA03113105 H20877 In the QCU reports is the wrong time

Known & Open Issues

ID MR ID Summary Workaround

V5 R4.3.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00023314 G98688 Incorporation of enhanced G.729 audio parameters
H11817 Integration of KSSL code for SSL connection from Java Midlet
RQ00023418 H09813 SRSR to function without reboot

Fixed Bugs

ID MR ID Summary
NA02926527 H11199 LDAP with authentication, dial does not work
NA02794693 H02512 no dial tone after adding voice tag to ENB entry
NA03009432 H13925 Auto Discover fails when using old style Deployment Tool

Known & Open Issues

ID MR ID Summary Workaround
NA02121417 G85617 Spoardically no answer on headset possible

V5 R4.2.1

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00019512 LDAP Authentication

Fixed Bugs

ID MR ID Summary
NA02872223 H04035 no watchdog for filetransfer
NA02832978 H04225 Plug&Play dosen't work
NA02525298 H01086 ENB Data get lost after update the Phone
NA02123627 5.1.28 with APM V1.02 export crash
NA02884341 Pin to IR diode has the right State during startu /Hook switch LED left on during app download (fail possible)

Known & Open Issues

ID MR ID Summary Workaround
NA02121417 Sporadically no connection to Headset N/A

V5 R2.36.4

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary

Fixed Bugs

ID MR ID Summary
NA02776840 H01386 SNTP Server get lost after upgrade
NA02728245 G98385 Time will be miscount
NA02739200 H00008 No payload in cons initiated by OC as CTI provider
NA02593354 G91097 SLK Module goes out of Service
G96601 Spor. Reboot of the phones
G95506 Sporadically no display message after touching the display

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export crash N/A
NA02121417 Sporadically no connection to Headset N/A
NA02629307 Sporadically connection get lost during a call with Headset connected to acoustic adapter N/A
NA02669542 Link Flap on Network Switch if phone is powered off N/A

V5 R2.36.0

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00022933 G92329 Ascending port numbers for RTP/RTCP
G90521 Spansion FLASH chip support needed
RQ00022157 G92363 Input of HiPath DLS IP address via optiPoint TUI.
Plug & Play now prompts for HiPath DLS IP address if not supplied via DHCP or other means.

Fixed Bugs

ID MR ID Summary
NA02584060 G90624 X1: IP phones switch over to "Gateway not found"
G90756 After changing the RTP Port Base the phone made no reboot
G87166 CGW-ST: MFS: mobile HFA-visited phone not work after logoff
NA02032712 G71308 V5.1.25: Time Settings
G94904 Loss of 802.1x functionality since 5.1.32
G38451 USA V5:OP4X0 : SRSR fails when logged on mobile
NA02593857 G91807 LDAP optiPoint Display Module does not work.

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export crash N/A
NA02121417 Sporadically no connection to Headset N/A
NA02629307 Sporadically connection get lost during a call with Headset connected to acoustic adapter N/A
NA02593354 Self labeling key module goes out of Service N/A
NA02669542 Link Flap on Network Switch if phone is powered off N/A

V5 R1.35.1

Back to optiPoint 410/420 product page.

What’s New?

ID MR ID Summary
RQ00022933 G92329 Ascending port numbers numbers for RTP/RTCP

Fixed Bugs

ID MR ID Summary
G90756 After changing the RTP Port Base the new values do not take effect

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 V5.1.28 with APM V1.02 export crash N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA02593857 G91807 LDAP optiPoint Display Module does not work. N/A
NA02121417 Sporadically no connection to headset N/A
NA02278982 G79492 Wrong QDC Values for every 1 hour report N/A
NA02629307 Sporadically connection get lost during a call with Headset connected to acousticadpater N/A
NA02593354 self labeling key module goes out of Service N/A

V5 R1.35.0

Back to optiPoint 410/420 product page.

What’s New?

No new features!

Fixed Bugs

ID MR ID Summary
G85350 DLS10: No bulk SW deployment possible with V5 R1.34.0
NA02424549 G84096 Reboot of phone when using Park feature
NA02376575 G82156 FA: optiPoint Application Module doesn't work
G86288 H.235 Security: new default for security time window
NA01978927 G75435 Sporadically no display message after touching the phone
NA01951058<br\>NA01777953 G61064 optiPoint 420 advance+Keymodule HFA V5.1.11: Sporadically keymodule goes out of service
NA02391266 G84350 self-labeling-key Module goes out of Service
G84414 Memory leak when using H.235 security
G85757 No DeploymentTool support with V5 R1.33.0 and V5 R1.34.0

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 V5.1.28 with APM V1.02 export crash N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA01295901 G37196 No system menu shown via CTI N/A
NA02121417 Sporadically no connection to headset N/A
NA02278982 G79492 Wrong QDC Values for every 1 hour report N/A

V5 R1.34.0

Back to optiPoint 410/420 product page.

Pls consider Readme tag for updates in corresponding documents.

What’s New?

ID MR ID Summary
RQ00020844 XML / AGP Interface on optiPoint IP Phones

Introduction of an "Application Generic Platform (AGP)" offers now the possibility to run server based XML-applications on an application module. The phone communicates with the server using XML.
link with further informaton:
XML on optiPoint application module

Fixed Bugs

ID MR ID Summary
G84107 AGP: Configurable Backlight
G79726 AGP: Virtual keyboard problems following app pause.
G82097 AGP platform not updated on applicaiton download
G79728 AGP: Carraige return on textbox overides text constraint

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export chrash N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA01295901 G37196 No systemmenue shown via cti N/A
NA01951058 G61064 Op420adv+keymodule HFA V.5.1.11 N/A
NA02121417 Sporadically no connection to headset N/A
NA02278982 G79492 Wrong QDC Values for every 1 hour report N/A
NA02391266 G84350 Sporadically optiPoint self labelling key module goes out of service N/A
NA01978927 G75435 Sporadically no display message after touching the phone N/A
NA01777953 G61064 Sporadically optiPoint key module goes out of service N/A

V5 R1.33.0

Back to optiPoint 410/420 product page.

Pls consider Readme tag for updates in corresponding documents.

What’s New?

ID MR ID Summary
RQ00018841 G73191 Remote Netboot Upgrade

This CR enables the Netboot firmware to be upgraded using the standard SW-update methodologies (WBM or DLS).
Note: Netboot version 3.08 is required in order to see the version deployed via WBM or DLS

RQ00021052 G75897 New Software Versioning scheme to be implemented

The version string format has been changed from e.g. 5.1.33 to V5R1.33.0. This modification causes a modified information being displayed during the phone boot sequence.

RQ00020974 G82942 Introduce Configurable Min. Jitter Buffer Target

Introduction of ....

RQ00021139 Display of Netboot SW Version in DLS

Fixed Bugs

ID MR ID Summary
NA02391321 G82330 Optipoint restart after pickup call
G78331 DLS10: Missing Item informationof NETBOOT Version
G82254 Half-way Payload conn. about PPP at 30s Calling
G74863 payload lost after nmap port scan of H.245 port

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export chrash N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA01295901 G37196 No systemmenue shown via cti N/A
NA01951058 G61064 Op420adv+keymodule HFA V.5.1.11 N/A
NA02121417 Spoardically no connection to headset N/A
NA02278982 G79492 Wrong QDC Values for every 1 hour report N/A

V5 R1.32

Back to optiPoint 410/420 product page.

What’s New?

No new features!

Fixed Bugs

ID MR ID Summary
G74951 Reboot when connection established from op600
NA01914496 G32375 WBM not available
G69356 DLS10: SRSR: different GW-ID not possible for op410/420
NA02136997 G76449 Op410: V5.1.26: Sporadically optiPoint play no Audio
G76443 oP410 IP phone one way transmission on external calls
G76632 IP Phone 1-way xmission on internal calls
NA02088884 G46610 Acoustic adapter interrupt connection
G78208 INCA-IP V1.4 Errata - DSP Memory Error workaround
G75531 LDAP Client Improvements
G77965 Web diagnostic logging page not accessible

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export chrash N/A
NA01914496 G32375 WBM not available N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA02054162 G19681 SEC: WBM blocked after nmap port scan N/A
NA01295901 G37196 No systemmenue shown via cti N/A
NA01951058 G61064 Op420adv+keymodule HFA V.5.1.11 N/A


V5.1.31

Back to optiPoint 410/420 product page.

Pls consider Readme tag for updates in corresponding documents.

What’s New?

ID MR ID Summary
RQ00019055 G58170 RFC2833 DTMF on HFA

Depending on endpoint capabilities, the endpoint can now send DTMF tones as packets encoded according to RFC 2833 standard.

RQ00015019 G34093 Personal Password for Callbridge-IP

The Callbridge-IP connection is now authenticated using the "User" password as established in the user section of the WBM.
Note: User sections have been added for entry, economy and economy plus variants. Authentication using the "subscriber" password is no longer possible.

NA01680321 G63158 USA: Limitation on number of VoIP calls

The number of internal call records that can be maintained has been increased from 3 to 5. This change is relevant for H2k, H3k, H5k only. Default RTP/UDP port range has to be extended.

Fixed Bugs

ID MR ID Summary
NA01089158 G65693 Very low volume at OP4x0 with loud background noice
NA02035910 G19681 SEC: WBM blocked after nmap port scan
G66324 RQ00019050: No AU_SEND_DTMF_ACK from IP phones
G42604 Mobility - 3k mobile session not restored after power fail
G44252 DLS10: LDAP default values sent from phone (eco/entry)
G66521 IP Mobility Supervisor not working when H235 enabled
G73906 Config Service needs re-introducing for old style Dep. tool

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export chrash N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA01295901 G37196 No systemmenue shown via cti N/A
NA01951058 G61064 Op420adv+keymodule HFA V.5.1.11 N/A

V5.1.30

Back to optiPoint 410/420 product page.

What’s New?

No new features!

Fixed Bugs

ID MR ID Summary
NA02044848 G70245 Phone Reboot initiated via http contact
G54369 Starting Java Midlet after ENB start is impossible.
G56818 2 pty IP Phone HFA -long duration call- RTP Stops
G64294 802.1x: no indication of 802.1x re-authentication failure
G65716 op410 Entry - no indication of 802.1x status
G67158 EAP Respons contains no phone certificate
G67178 op410 SiemensTLS hangs if negotiation will not finished
G69248 op410 sends wrong user name in EAP Identity Response to IAS
G52307 802.1x: loss of speech during 802.1x re-authentication
G69070 CR 14332: No dialtone after SRSR to STBY if H235 aktivated
G64478 DLS10: Dialing properties, Ext. acc code: leading 0 cut
G31620 DLS10: negative timezone offset values from DLS not displ.
G57012 DLS10: neg. Timezone offset not applied by phone
NA01912039 G65705 DLS10: NA01912039, P&P with E164 spor. NOK
G67414 DLS10: Wrong behavior after faulty filetransfer
G67575 optiPoint 410/420 logging to File doesn't work in 5.1.25
NA01837680 G63033 Display with netboot 3.06 disorted
G68883 USB keyboard: German keys don't invoke ENB
G53500 No "Done" Button after Online Help and hits Virtual keyboard
G54486 No german text for restart request when running Java applet
G59426 Default fast-start offer not optimal for HiPath 3K
G67418 SRSR failure to switch back automatically
NA01807670 G61591 Op420adv HFA V5.1.18 no Speech
G45631 close Java midlet file with "Enter" Key not possible
G72708 V5.1.29: Phone can't login after Mobile Forced Logoff
NA01995346 G69856 OP4xx in "Logging On" after system shutdown
G71338 After hold, HFA has one way speech path

Known & Open Issues

ID MR ID Summary Workaround
NA02123627 G73190 5.1.28 with APM V1.02 export chrash N/A
NA01914496 G32375 WBM not available N/A
NA02032712 G71308 V5.1.25: Time Settings N/A
NA02034671 G71503 PCUserClient410.exe doesn't work N/A
NA02054162 G19681 SEC: WBM blocked after nmap port scan N/A
NA01295901 G37196 No systemmenue shown via cti N/A
NA01951058 G61064 Op420adv+keymodule HFA V.5.1.11 N/A

See also

Retrieved from "http://wiki.unify.com/index.php?title=optiPoint_410/420_Release_Notes&oldid=43965"