Difference between revisions of "optiPoint 410/420 S"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (Protected "optiPoint 410/420 S": This page is maintained by admin only for quality reasons [edit=sysop:move=sysop]) |
m (→Mass deployment) |
||
Line 321: | Line 321: | ||
''' Mass deployment – how it works ''' <br /> | ''' Mass deployment – how it works ''' <br /> | ||
− | + | IP terminals offer a range of functions and characteristics that were unknown or technically impossible | |
− | + | in analog or early digital system environments (for example, ISDN). But increased product flexibility requires more complex technology. For this reason, it is essential that VoIP devices be optimally configured for users while at the same time expenditure (costs, time, training) must be kept to a minimum for service providers. Different scenarios have different requirements. However the following factors are critical for all solutions: | |
− | + | * Minimum network intervention or modification | |
+ | * No inflexible or costly preconfiguration at the terminal | ||
+ | * No or minimum (one-off) user activities | ||
+ | There are two main scenarios: | ||
* Using the [[Mass Deployment HiPath Deployment Service|HiPath Deployment Service]] tool (DLS) or | * Using the [[Mass Deployment HiPath Deployment Service|HiPath Deployment Service]] tool (DLS) or | ||
* Using [[Mass Deployment XML configuration files|(XML-) configuration files]] | * Using [[Mass Deployment XML configuration files|(XML-) configuration files]] |
Revision as of 07:14, 29 September 2006
The optiPoint 410/420 S phone family consists of a wide range of optiPoint SIP phones, from optiPoint 410 entry S for basic telephony to optiPoint 420 advance S for high-volume callers with sophisticated needs.
Contents
Phone range
All phones of this phone family have a common feature set (listed below) and additional features per model.
- SIP support according to RFC 3261
- Power over Ethernet (PoE) IEEE 802.3af or external power supply (EU, US and UK power adapters)
- Computer Telephony Integration (CTI) / Third party call control
- Remote administration via Web-based management, HiPath Deployment Service or XML files
- Codecs G.711, G.723.1A, G.729AB and G.722 wideband codec
- Open listening
- Freely programmable feature keys
- 2 keys (plus/minus) for volume settings
- Keypad with 12 keys
- Dialog keys (optiGuide) for navigation / feature control (except 410 entry)
- Wall-mountable (seperate bracket required)
- Housing color: manganese (dark) or arctic (bright)
There are two product lines available: optiPoint 410 S and optiPoint 420 S. The difference is that the 410 S models support paper labels for the programable feature keys, whilst the 420 S provide self-labeling keys (LCD).
Within the optiPoint 410 S and optiPoint 420 S family, the user can choose among different hardware models:
Phone model | Display | Self-labeling keys |
Dialog keys |
Function keys |
Full duplex handsfree mode |
build-in LAN Switch |
Adapter- support |
Adapter slots |
Headset port |
USB master port |
---|---|---|---|---|---|---|---|---|---|---|
optiPoint 410 entry S | - | - | - | 8 | - | - | - | - | - | - |
optiPoint 410 economy S | 2-line, tiltable | - | 3 | 12 | - | - | - | - | - | - |
optiPoint 410 economy plus S | 2-line, tiltable | - | 3 | 12 | - | Yes | - | - | Yes | - |
optiPoint 410 standard S | 2-line, backlit, tiltable | - | 3 | 12 | Yes | Yes | Yes | 2 | Yes | - |
optiPoint 410 advance S | 4-line, backlit, tiltable | - | 3 | 19 | Yes | Yes | Yes | 1 | Yes | Yes |
optiPoint 420 economy S | 2-line, tiltable | Yes | 3 | 12 | - | - | - | - | - | - |
optiPoint 420 economy plus S | 2-line, tiltable | Yes | 3 | 12 | - | Yes | - | - | Yes | - |
optiPoint 420 standard S | 2-line, backlit, tiltable | Yes | 3 | 12 | Yes | Yes | Yes | 2 | Yes | - |
optiPoint 420 advance S | 4-line, backlit, tiltable | Yes | 3 | 18 | Yes | Yes | Yes | 1 | Yes | Yes |
The telephony application provides a set of features and the connectivity to a set of SIP systems (proxies, application servers)
- General overview on platforms / systems:
Platform | Comment | Details |
---|---|---|
Siemens HiPath 2000 | Pure IP-Switch | |
Siemens HiPath 3000/5000 | Hybrid Switch/IP-Softswitch | |
HiPath 4000 | Hybrid-Switch | |
HiPath 8000 | IP-Softswitch | HiPath 8000 Universe |
Siemens SURPASS Hosted Office / hiQ 4200 / hiQ8000 | IP-Softswitch (carrier grade) | |
BroadSoft | IP-Softswitch (carrier-grade) | Broadsoft environment |
Sylantro | IP-Softswitch (carrier grade) | Sylantro environment |
Asterisk | Open Source IP-Softswitch | Admin Manual optiPoint 410-420 Asterisk |
For detailed interoperability information pls check Interoperability matrix optiPoint 410 S / 420 S.
Connectivity to several VoIP providers is supported. For configuration hints see the How To article setting up the optiPoint 410 S/420 S with a VoIP provider.
Documentation
All optiPoint phones are shipped with a printed document providing brief instruction regarding installation and operation. For both user and administrators, a comprehensive and updated documentation is provided as PDF files. Depending on the system environment, the user may choose between HiPath 8000, BroadSoft and Sylantro specific documentation.
Documentation in other languages than English and for older versions can be found in the download area of the Siemens Siemens HiPath homepage.
User Manuals HiPath 8000 environment
- User Manual optiPoint 410-420 entry S
- User Manual optiPoint 410-420 economy S, economy plus S, standard S
- User Manual optiPoint 410-420 advance S
User Manuals BroadSoft environment
- User Manual optiPoint 410-420 economy S, economy plus S, standard S - BroadSoft
- User Manual optiPoint 410-420 advance S BroadSoft S
User Manuals Sylantro environment
- User Manual optiPoint 410-420 economy S, economy plus S, standard S - Sylantro
- User Manual optiPoint 410-420 advance S Sylantro S
Administration Manuals HiPath 8000, BroadSoft, Sylantro, Asterisk
- Administration Manual optiPoint 410-420 S family
- Admin Manual 802.1x optiPoint 410-420 family
- Admin Manual XML-Management optiPoint 410-420 V6.0
- Admin Manual optiPoint 410-420 Asterisk
- Admin Manual HiPath Deplyoment Service Tool
Installation Manual
Datasheet
Miscelleanous documents
Firmware / Software
The SIP firmware provides encryption capabilities. Hence its distribution must follow legal requirements which do not allow unrestricted SW distribution via the Internet. The firmware is only provided by Siemens technicians or by official Siemens Partners. Customers with self-care contracts will have access to SW within the SEBA Web portal.
The firmware of the optiPoint SIP phones comprises two components:
- netboot - This component provides low level features (like Boot process, LAN connectivity). This component is not changed once a phone has been produced and/or is in operation. However, new features may be provided during the ongoing development and production process of the optiPoint phones.
- application - This component contains all features for call handling, signalling, audio control, user interface and language support. It is continuously developed and this takes takes place:
- version based, introducing significant features or feature packages
- update based, introducing limited features or feature enhancements
- based on Software Maintenance Release, providing fault corrections
Application SW can be downloaded to the phone via FTP. The actual application SW version is V6.
To get an overview of all release notes for the optiPoint 410 S / 420 S family see the history of all Release Notes.
Version No. | Release date | Release notes |
---|---|---|
V6 R0.55.0 | 08/23/2006 | Release Note for V6 R0.55.0 |
V6.0.54 | 08/07/2006 | Release Note for V6.0.54 |
V5 R0.35.0 | 09/16/2006 | Release Note for V5 R0.35.0 |
V5.0.31 | 07/21/2006 | Release Note for V5.0.31 |
V5.0.30 | 06/26/2006 | Release Note for V5.0.30 |
V5.0.27 | 04/19/2006 | Release Note for V5.0.27 |
End of Life information
Information as of 14.09.2006
- V4.0 has been phased-out 5/2005
- V4.1 is available, but EOL planning has started
- V5.0: EOL planning is completed:
- 29. Aug. 2006 End of Central Training
- 29. Sep. 2006 End of Software Support
- 29. Sep. 2006 Order Stop Customer Documentation
- 29. Dec. 2006 End of Product Activities
- V6.0 is available
Mass deployment
What do we mean with “deployment” ?
The installation of an IP phone in general requires integrating the phone into an IP infrastructure specific to the customer’s or user’s needs. This integration normally requires some activities on all components involved, i.e. on the IP phone and on other components like application servers and routers.
Additionally to the hardware related tasks like providing LAN cables and setting up the necessary power supply, this integration also covers adapting the IP phone to the individual customer configuration by setting various parameters to appropriate values. In this article we will use the term “deployment” for this task, including the provisioning of new software to the IP phone. Sometimes the term “provisioning” is used instead of “deployment”.
Individual phones can be easily set up using the local menue and the keypad or - more comfortable and even remotely - the phone's web administration. Larger companies or voice service providers have to install and maintain hundreds or thousands of phones, requiring mass deployment capabilities.
Mass deployment – how it works
IP terminals offer a range of functions and characteristics that were unknown or technically impossible in analog or early digital system environments (for example, ISDN). But increased product flexibility requires more complex technology. For this reason, it is essential that VoIP devices be optimally configured for users while at the same time expenditure (costs, time, training) must be kept to a minimum for service providers. Different scenarios have different requirements. However the following factors are critical for all solutions:
- Minimum network intervention or modification
- No inflexible or costly preconfiguration at the terminal
- No or minimum (one-off) user activities
There are two main scenarios:
- Using the HiPath Deployment Service tool (DLS) or
- Using (XML-) configuration files
Add-on devices, Adapters and Accessories
- optiPoint display module (phased-out)
- optiPoint self labelling key module
- optiPoint key module
- optiPoint accoustic adapter
- optiPoint recorder adapter
- Headsets
- External keyboard
How To
- Update or upgrade optiPoint SIP phones
- Migrate optiPoint 410/420 CorNet IP (HFA) phones to SIP
- Factory reset optiPoint 410/420 S phones
- Set up a Manager / Secretary installation with HiPath 8000
- Using DSS keys with BroadSoft Rel.13
Additional task descriptions with links to corresponding procedures in the How To article(s)