Difference between revisions of "optiPoint 410/420 Release Notes"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (→Known & Open Issues: some text corrected) |
m (→Known & Open Issues: some text corrected) |
||
| Line 102: | Line 102: | ||
| NA02629307 | | NA02629307 | ||
| | | | ||
| − | | Sporadically connection get lost during a call with Headset connected to acoustic | + | | Sporadically connection get lost during a call with Headset connected to acoustic adapter |
| N/A | | N/A | ||
|- | |- | ||
Revision as of 21:50, 10 March 2007
Contents
Overview
optiPoint V5.1 was released to market in March 2005.
Major enhancement is the introduction of confidentiality (SRTP Payload encryption) in this release.
See also general information about optiPoint 410/420 V5.1
Software versioning / naming
A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:
V x[.y] R m.f.h
in which field:
- x[.y] denotes the Major release level
- m denotes the Minor release level
- f denotes the Fix release level
- h denotes the Hotfix level
| This naming convention scheme does not imply any naming requirements for file / files available. |
More informations on the New Software Versioning scheme wiki page.
V5 R2.36.0
Back to optiPoint 410/420 product page.
What’s New?
| ID | MR ID | Summary |
|---|---|---|
| RQ00022933 | G92329 | Ascending port numbers for RTP/RTCP |
| G90521 | Spansion FLASH chip support needed | |
| RQ00022157 | G92363 | Input of HiPath DLS IP address via optiPoint TUI. Plug & Play now prompts for HiPath DLS IP address if not supplied via DHCP or other means. |
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| NA02584060 | G90624 | X1: IP phones switch over to "Gateway not found" |
| G90756 | After changing the RTP Port Base the phone made no reboot | |
| G87166 | CGW-ST: MFS: mobile HFA-visited phone not work after logoff | |
| NA02032712 | G71308 | V5.1.25: Time Settings |
| G94904 | Loss of 802.1x functionality since 5.1.32 | |
| G38451 | USA V5:OP4X0 : SRSR fails when logged on mobile | |
| NA02593857 | G91807 | LDAP optiPoint Display Module does not work. |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export crash | N/A |
| NA02121417 | Sporadically no connection to Headset | N/A | |
| NA02629307 | Sporadically connection get lost during a call with Headset connected to acoustic adapter | N/A | |
| NA02593354 | Self labeling key module goes out of Service | N/A | |
| NA02669542 | Link Flap on Network Switch if phone is powered off | N/A |
V5 R1.35.1
Back to optiPoint 410/420 product page.
What’s New?
| ID | MR ID | Summary |
|---|---|---|
| RQ00022933 | G92329 | Ascending port numbers numbers for RTP/RTCP |
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| G90756 | After changing the RTP Port Base the new values do not take effect |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | V5.1.28 with APM V1.02 export crash | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA02593857 | G91807 | LDAP optiPoint Display Module does not work. | N/A |
| NA02121417 | Sporadically no connection to headset | N/A | |
| NA02278982 | G79492 | Wrong QDC Values for every 1 hour report | N/A |
| NA02629307 | Sporadically connection get lost during a call with Headset connected to acousticadpater | N/A | |
| NA02593354 | self labeling key module goes out of Service | N/A |
V5 R1.35.0
Back to optiPoint 410/420 product page.
What’s New?
No new features!
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| G85350 | DLS10: No bulk SW deployment possible with V5 R1.34.0 | |
| NA02424549 | G84096 | Reboot of phone when using Park feature |
| NA02376575 | G82156 | FA: optiPoint Application Module doesn't work |
| G86288 | H.235 Security: new default for security time window | |
| NA01978927 | G75435 | Sporadically no display message after touching the phone |
| NA01951058<br\>NA01777953 | G61064 | optiPoint 420 advance+Keymodule HFA V5.1.11: Sporadically keymodule goes out of service |
| NA02391266 | G84350 | self-labeling-key Module goes out of Service |
| G84414 | Memory leak when using H.235 security | |
| G85757 | No DeploymentTool support with V5 R1.33.0 and V5 R1.34.0 |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | V5.1.28 with APM V1.02 export crash | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA01295901 | G37196 | No system menu shown via CTI | N/A |
| NA02121417 | Sporadically no connection to headset | N/A | |
| NA02278982 | G79492 | Wrong QDC Values for every 1 hour report | N/A |
V5 R1.34.0
Back to optiPoint 410/420 product page.
Pls consider Readme tag for updates in corresponding documents.
What’s New?
| ID | MR ID | Summary |
|---|---|---|
| RQ00020844 | XML / AGP Interface on optiPoint IP Phones Introduction of an "Application Generic Platform (AGP)" offers now the possibility to run server based XML-applications on an application module. The phone communicates with the server using XML. |
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| G84107 | AGP: Configurable Backlight | |
| G79726 | AGP: Virtual keyboard problems following app pause. | |
| G82097 | AGP platform not updated on applicaiton download | |
| G79728 | AGP: Carraige return on textbox overides text constraint |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export chrash | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA01295901 | G37196 | No systemmenue shown via cti | N/A |
| NA01951058 | G61064 | Op420adv+keymodule HFA V.5.1.11 | N/A |
| NA02121417 | Sporadically no connection to headset | N/A | |
| NA02278982 | G79492 | Wrong QDC Values for every 1 hour report | N/A |
| NA02391266 | G84350 | Sporadically optiPoint self labelling key module goes out of service | N/A |
| NA01978927 | G75435 | Sporadically no display message after touching the phone | N/A |
| NA01777953 | G61064 | Sporadically optiPoint key module goes out of service | N/A |
V5 R1.33.0
Back to optiPoint 410/420 product page.
Pls consider Readme tag for updates in corresponding documents.
What’s New?
| ID | MR ID | Summary |
|---|---|---|
| RQ00018841 | G73191 | Remote Netboot Upgrade This CR enables the Netboot firmware to be upgraded using the standard SW-update methodologies (WBM or DLS). |
| RQ00021052 | G75897 | New Software Versioning scheme to be implemented The version string format has been changed from e.g. 5.1.33 to V5R1.33.0. This modification causes a modified information being displayed during the phone boot sequence. |
| RQ00020974 | G82942 | Introduce Configurable Min. Jitter Buffer Target Introduction of .... |
| RQ00021139 | Display of Netboot SW Version in DLS |
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| NA02391321 | G82330 | Optipoint restart after pickup call |
| G78331 | DLS10: Missing Item informationof NETBOOT Version | |
| G82254 | Half-way Payload conn. about PPP at 30s Calling | |
| G74863 | payload lost after nmap port scan of H.245 port |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export chrash | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA01295901 | G37196 | No systemmenue shown via cti | N/A |
| NA01951058 | G61064 | Op420adv+keymodule HFA V.5.1.11 | N/A |
| NA02121417 | Spoardically no connection to headset | N/A | |
| NA02278982 | G79492 | Wrong QDC Values for every 1 hour report | N/A |
V5.1.32
Back to optiPoint 410/420 product page.
What’s New?
No new features!
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| G74951 | Reboot when connection established from op600 | |
| NA01914496 | G32375 | WBM not available |
| G69356 | DLS10: SRSR: different GW-ID not possible for op410/420 | |
| NA02136997 | G76449 | Op410: V5.1.26: Sporadically optiPoint play no Audio |
| G76443 | oP410 IP phone one way transmission on external calls | |
| G76632 | IP Phone 1-way xmission on internal calls | |
| NA02088884 | G46610 | Acoustic adapter interrupt connection |
| G78208 | INCA-IP V1.4 Errata - DSP Memory Error workaround | |
| G75531 | LDAP Client Improvements | |
| G77965 | Web diagnostic logging page not accessible |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export chrash | N/A |
| NA01914496 | G32375 | WBM not available | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA02054162 | G19681 | SEC: WBM blocked after nmap port scan | N/A |
| NA01295901 | G37196 | No systemmenue shown via cti | N/A |
| NA01951058 | G61064 | Op420adv+keymodule HFA V.5.1.11 | N/A |
V5.1.31
Back to optiPoint 410/420 product page.
Pls consider Readme tag for updates in corresponding documents.
What’s New?
| ID | MR ID | Summary |
|---|---|---|
| RQ00019055 | G58170 | RFC2833 DTMF on HFA Depending on endpoint capabilities, the endpoint can now send DTMF tones as packets encoded according to RFC 2833 standard. |
| RQ00015019 | G34093 | Personal Password for Callbridge-IP The Callbridge-IP connection is now authenticated using the "User" password as established in the user section of the WBM. |
| NA01680321 | G63158 | USA: Limitation on number of VoIP calls The number of internal call records that can be maintained has been increased from 3 to 5. This change is relevant for H2k, H3k, H5k only. Default RTP/UDP port range has to be extended. See current Used Ports database (Siemens internally only). |
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| NA01089158 | G65693 | Very low volume at OP4x0 with loud background noice |
| NA02035910 | G19681 | SEC: WBM blocked after nmap port scan |
| G66324 | RQ00019050: No AU_SEND_DTMF_ACK from IP phones | |
| G42604 | Mobility - 3k mobile session not restored after power fail | |
| G44252 | DLS10: LDAP default values sent from phone (eco/entry) | |
| G66521 | IP Mobility Supervisor not working when H235 enabled | |
| G73906 | Config Service needs re-introducing for old style Dep. tool |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export chrash | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA01295901 | G37196 | No systemmenue shown via cti | N/A |
| NA01951058 | G61064 | Op420adv+keymodule HFA V.5.1.11 | N/A |
V5.1.30
Back to optiPoint 410/420 product page.
What’s New?
No new features!
Fixed Bugs
| ID | MR ID | Summary |
|---|---|---|
| NA02044848 | G70245 | Phone Reboot initiated via http contact |
| G54369 | Starting Java Midlet after ENB start is impossible. | |
| G56818 | 2 pty IP Phone HFA -long duration call- RTP Stops | |
| G64294 | 802.1x: no indication of 802.1x re-authentication failure | |
| G65716 | op410 Entry - no indication of 802.1x status | |
| G67158 | EAP Respons contains no phone certificate | |
| G67178 | op410 SiemensTLS hangs if negotiation will not finished | |
| G69248 | op410 sends wrong user name in EAP Identity Response to IAS | |
| G52307 | 802.1x: loss of speech during 802.1x re-authentication | |
| G69070 | CR 14332: No dialtone after SRSR to STBY if H235 aktivated | |
| G64478 | DLS10: Dialing properties, Ext. acc code: leading 0 cut | |
| G31620 | DLS10: negative timezone offset values from DLS not displ. | |
| G57012 | DLS10: neg. Timezone offset not applied by phone | |
| NA01912039 | G65705 | DLS10: NA01912039, P&P with E164 spor. NOK |
| G67414 | DLS10: Wrong behavior after faulty filetransfer | |
| G67575 | optiPoint 410/420 logging to File doesn't work in 5.1.25 | |
| NA01837680 | G63033 | Display with netboot 3.06 disorted |
| G68883 | USB keyboard: German keys don't invoke ENB | |
| G53500 | No "Done" Button after Online Help and hits Virtual keyboard | |
| G54486 | No german text for restart request when running Java applet | |
| G59426 | Default fast-start offer not optimal for HiPath 3K | |
| G67418 | SRSR failure to switch back automatically | |
| NA01807670 | G61591 | Op420adv HFA V5.1.18 no Speech |
| G45631 | close Java midlet file with "Enter" Key not possible | |
| G72708 | V5.1.29: Phone can't login after Mobile Forced Logoff | |
| NA01995346 | G69856 | OP4xx in "Logging On" after system shutdown |
| G71338 | After hold, HFA has one way speech path |
Known & Open Issues
| ID | MR ID | Summary | Workaround |
|---|---|---|---|
| NA02123627 | G73190 | 5.1.28 with APM V1.02 export chrash | N/A |
| NA01914496 | G32375 | WBM not available | N/A |
| NA02032712 | G71308 | V5.1.25: Time Settings | N/A |
| NA02034671 | G71503 | PCUserClient410.exe doesn't work | N/A |
| NA02054162 | G19681 | SEC: WBM blocked after nmap port scan | N/A |
| NA01295901 | G37196 | No systemmenue shown via cti | N/A |
| NA01951058 | G61064 | Op420adv+keymodule HFA V.5.1.11 | N/A |
