optiPoint SIP HW compatibility
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
To operate optiPoint SIP phones with SIP V7 firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also general information on SIP V7.
Contents
Hardware support
Part number
All phones ordered as SIP phones can be used for SIP V7 without restrictions. Phones originally ordered as CorNet IP (HFA), can be migrated to SIP, beginning with a specific hardware revision level (see table below).
The part number on the housing's bottom side shows the phone type originally ordered:
- A for CorNet IP (HFA) phones, example: S30817-S7212-A107-6
- L for SIP V4.1 phones, example: S30817-S7212-L107-1
- M for SIP V5.0 or V6.0 or V7.0 phones, example: S30817-S7212-M107-1
Compatibility of originally CorNet IP phones
| CorNet IP Phone | Housing color | Part number | Compatible version |
|---|---|---|---|
| optiPoint 410 entry | arctic | S30817-S7201-A101-X | X ≥ 13 |
| mangan | S30817-S7201-A107-X | X ≥ 20 | |
| optiPoint 410 economy | arctic | S30817-S7202-A101-X | X ≥ 12 |
| mangan | S30817-S7202-A107-X | X ≥ 18 | |
| optiPoint 410 economy plus | arctic | S30817-S7212-A101-X | X ≥ 6 |
| mangan | S30817-S7212-A107-X | X ≥ 7 | |
| optiPoint 410 standard | arctic | S30817-S7203-A101-X | X ≥ 12 |
| mangan | S30817-S7203-A107-X | X ≥ 20 | |
| optiPoint 410 advance | arctic | S30817-S7204-A101-X | X ≥ 12 [1] |
| mangan | S30817-S7204-A107-X | X ≥ 17 <ref name="USB_port"> | |
| optiPoint 420 economy | arctic | S30817-S7209-A101-X | X ≥ 1 |
| mangan | S30817-S7209-A107-X | X ≥ 3 | |
| optiPoint 420 economy plus | arctic | S30817-S7210-A101-X | X ≥ 3 |
| mangan | S30817-S7210-A107-X | X ≥ 3 | |
| optiPoint 420 standard | arctic | S30817-S7211-A101-X | X ≥ 3 |
| mangan | S30817-S7211-A107-X | X ≥ 3 | |
| optiPoint 420 advance | arctic | S30817-S7207-A101-X | X ≥ 11 <ref name="USB_port"> |
| mangan | S30817-S7207-A107-X | X ≥ 9 <ref name="USB_port"> |
Additionally it is necessary that the phone hardware contains the INCA©-IP chip V1.4.
Software support
| Software | Version |
|---|---|
| Bootrom (NetBoot) | V4.05 |
| optiPoint display module software | Usage of the optiPoint display module is not longer supported |
| optiPoint application module software | The optiPoint application module is not supported in SIP |
Compliant products
Please check optiPoint 410/420 S interoperability matrix.
The Deployment Tool is not released for SIP V7.0 phones. Use Deployment Service instead.- ↑
Upon the following hardware revisions the optiPoint 4x0 advance does not longer have an USB-port. This hardware revision must be used with software version optiPoint 410/420 SIP V7.0 R4.1.0 (or higher).
- S30817-S7204-A101-26 (optiPoint 410 advance arctic)
- S30817-S7204-A107-31 (optiPoint 410 advance mangan)
- S30817-S7207-A101-26 (optiPoint 420 advance arctic)
- S30817-S7207-A107-24 (optiPoint 420 advance mangan)
- S30817-S7204-M101-8 (optiPoint 410 advance arctic)
- S30817-S7204-M107-8 (optiPoint 410 advance mangan)
- S30817-S7207-M101-9 (optiPoint 420 advance arctic)
- S30817-S7207-M107-9 (optiPoint 420 advance mangan)
