Difference between revisions of "Talk:CallBridge Collection"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m |
Gunnar.boll (talk | contribs) |
||
| Line 159: | Line 159: | ||
--Kimera 21:44, 16 November 2006 (CET) | --Kimera 21:44, 16 November 2006 (CET) | ||
| + | |||
| + | oP410/420 SIP phones do not support 1st party CTI, just uaCSTA to control the phone by an 3rd party CTI apps like ComAssistant via HiPath 8000 --[[User:Gunnar.boll|Gunnar.boll]] 22:16, 23 November 2006 (CET) | ||
Latest revision as of 21:16, 23 November 2006
Hello, we could add a table like the one below, valid for the three types of CallBridge providers:
Currently supported phones
| Workpoint | Operating mode | Connection | CallBridge TA | CallBridge TU | CallBridge IP | Note |
|---|---|---|---|---|---|---|
| optiSet E basic | Up0/E | V.24 | Yes | No | No | 1 |
| optiSet E advance | Up0/E | V.24 | Yes | No | No | 1 |
| optiSet E advance plus | Up0/E | V.24 | Yes | No | No | 2 |
| optiSet E conference | Up0/E | V.24 | Yes | No | No | 2 |
| optiSet E memory | Up0/E | V.24 | Yes | No | No | 2 |
| optiPoint 500 basic | Up0/E | USB | No | Yes | No | 1 |
| optiPoint 500 standard | Up0/E | USB | No | Yes | No | 2 |
| optiPoint 500 standard SL (USA only) | Up0/E | USB | No | Yes | No | 2 |
| optiPoint 500 advance | Up0/E | USB | No | Yes | No | 2 |
| optiPoint 600 office | Up0/E | USB | No | Yes | No | 2 |
| optiPoint 410 entry | HFA | IP | No | No | Yes | 1 |
| optiPoint 410 economy | HFA | IP | No | No | Yes | 1 |
| optiPoint 410 economy plus | HFA | IP | No | No | Yes | 1 |
| optiPoint 410 standard | HFA | IP | No | No | Yes | 2 |
| optiPoint 410 advance | HFA | IP | No | No | Yes | 2 |
- Note 1: These workpoints have the On-Hook Dialing feature, but not Handsfree. This means that user can only answer an incoming call or establish a connection to the remote station by manually lifting the handset.
- Note 2: These workpoints have both On-Hook Dialing and Handsfree features as well as a loudspeaker key. This means that user can make a call without needing to operate the phone manually.
--Kimera 11:23, 16 November 2006 (CET)
- Have a look on the Phone supporting matrix. And the optiPoint SIP phones - are they also applicable? ... and I think, we should put in another row with optiPoint 600 as HFA device. --Horemu 16:01, 16 November 2006 (CET)
- Hi, added optiPoint 600 office HFA (CorNet IP), it was left behind ;-).
- About CallBridge Collection V2.0 and optiPoint 410/420 S: yes, it should support those SIP versions (I think via an IP TSP like CallBridge IP) but it's not explicitly stated anywhere.
- On the optiPoint 410/420 V6.0 S (Either available via optiGuide or phone's WBM), there are two CTI-related configurable parameters:
- * Auto Answer CTI
- * Auto Reconnect CTI
- those parameters let SIP workpoints interworking with a (Not well defined) CTI application running on a PC on the same LAN.
- This argument it's interesting: SIP CTI it's quite a bit a new approach, SIP can potentially reduce or replace complex CTI integration (And application using it are doing that) with a simple and open standard to implement 3rd Party call control through its Call Control Extensions; moreover, because SIP is based on the concept of intelligent endpoints, advanced call control scenarios can be invoked with relatively simple SIP call methods.
- Related arguments: see ECMA TR/87 (June 2004) see [CSTA] page.
- Probably optiPoint 410/420 S implement a uaCSTA (User Agent CSTA) and so they implement CSTA messages over SIP session.
- Hi, added optiPoint 600 office HFA (CorNet IP), it was left behind ;-).
--Kimera 21:44, 16 November 2006 (CET)
oP410/420 SIP phones do not support 1st party CTI, just uaCSTA to control the phone by an 3rd party CTI apps like ComAssistant via HiPath 8000 --Gunnar.boll 22:16, 23 November 2006 (CET)
