Views

Difference between revisions of "How to connect vTiger database to ODS"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Preface)
(Prerequisites)
Line 18: Line 18:
  
 
== Prerequisites ==
 
== Prerequisites ==
=== Information about Database ===  
+
=== Information about vTiger Database ===  
 
Several information about the database, which has to be connected to Open Directory Service must be available as prerequisite for properly configuration.  
 
Several information about the database, which has to be connected to Open Directory Service must be available as prerequisite for properly configuration.  
 
At least information about:
 
At least information about:

Revision as of 13:27, 13 December 2011


Error creating thumbnail: File missing
OpenScape Office Direcectory Service


Preface

This How To describes the connection of a vTiger database to OpenScape Office (OSO) by using the OpenDirectory Service (ODS. It is written based on OSO version V3R2. Deviations may occur, if higher versions are used.

Only the vTiger relevant setting are described here. For general ODS configuration issues have a look at:

All data shown here and also the screenshots are examples only, which are used to demonstrate the capabilities.

Prerequisites

Information about vTiger Database

Several information about the database, which has to be connected to Open Directory Service must be available as prerequisite for properly configuration. At least information about:

  • IP Adress
  • Database name
  • Login parameters
  • Database structure (tables attributes)

Depending on the database type and configuration several additional information may be required. It has to be ensured that an external server (ODS Server machine) is allowed to access the database.

To get such information it is highly recommended to involve the database administrator before starting the configuration. In some cases it could be necessary to create a specific user within the database server for access of Open Directory Service. This can only be done by the database adminstrator.

ODS Assistant

Administration of ODS is done by the OpenScape Office Administration Portal. For access type the following URL into the Internet browser

https://<oso-ip-address>/admin

After authentification Open Directory Service can be configured within the expert modus.

ODS Inst 1.png

A "left mouse click" to "Directory Service" opens the Assistant.

Settings

Some general items for the Open Directory Service have to be configured here:

ODS Inst 2.png

Activation of Open Directory Service

Per default Open Directory Service is deactivated. You can activate it by a tic within the checkbox. Afterwards you will get access to the configuration.

LDAP Server access data

Open Directory Service data can be accessed by OSO or third party LDAP capable clients. For authentication purpose the internal LDAP Server of Open Directory Service requires login name and a password.

In V3R2 the login is set fix to

uid=ldap,dc=web

It cannot be modified. The password should comprise 6 characters at least.

Note: Make shure that you remember the login data. You will need it later, when a LDAP client needs access to the LDAP Server of ODS. An anonymous LDAP login is not granted by ODS.

Data Sources

Open Directory Service allows the connection of several databases. The connection is done by so called “Database Connectors”.

For every database type a specific connector with appropriate configuration parameters exists. A database connector type can be used to connect multiple databases of the same type. Database connectors have to be configured individually to access a specific database. The specific configuration of a Database connector within the Open Directory Service is labelled as Data Source.

ODS Inst 3.png


Predefined Data Sources

Within Open Directory Service two Data Sources are preconfigured

  • OpenScape Office directories - Allows access to OpenScape Office directories.
  • OpenScape Office Speed Dials - Allows access to the OpenScape Office speed dials.

The pre-configured datasources cannot be deleted or modified except the configuration of “number conversion”, which could be necessary for some LDAP clients.

User defined Data Sources

You can create new Data Sources in a simple dialog guided way by pressing the “Add” button within the “Data sources” site.

Afterwards the Database Connector specific dialog starts, which allows to enter the appropriate data. You can modify already configured datasources at any time by pressing the edit button. Datasources, which you do not need need any longer can be deleted accordingly. Multiple datasources can be defined and operated simultaneously.

Status of connected datasources

The Settings Windows gives an overview about all configured datasources to you. In the last row the status of the data source is indicated by a coloured dot.

  • Green: Operational
  • Red: Status “ODBC not ok, LDAP not ok” configuration not correct or data source not available.
  • Yellow: Status “ODBC ok but LADP not ok” Service should be restarted
  • Grey: Status “configuration incomplete”

If you move the mouse pointer over the dot an additional text is shown in case of malfunction.

Add new SQL Data Source to ODS

If you select the "Add" button within the Data Source window, a new dialog opens, which allows the configuration of a new connection to a SQL datbase. Five tabs leads you, dependent on the type of SQL datasource through the whole configuation process.

ODS Inst 4.png

Database

Description

Name

At first you define the name of the datasource. This name is used to identify the datasource within the Open Directory Service. Max 20 alphanumeric characters can be used here

Description

Database specific information such as localtion can be enteres here Max 100 alphanumeric characters can be used here.

Database access

ODBC driver

Depending on the type of the target SQL database the suitable ODBC driver has to be selected. A drop down menu offers the available types:

  • mySql
  • Postgres
  • Sybase
  • Microsoft SQL

The following configuration parameters may differ from driver to driver.


Database Server address

The IPv4 address of the database server has to be entered here in the format:

www.xxx.yyy.zzz.

Entry of FQDN and URL is not recommended here.


Database Server port

The port of the Database Server within the Server machine has to be entered here.


Database name

This field supports alphanumeric input . The database name is case sensitive as it is used by the database server internally to identiy the database.


Database login

This field supports alphanumeric input . The database login name is case sensitive. Login name ist used by the database server to identify the user and to grant access to data according to its user configuration.


Database Password

This field supports alphanumeric input . The database login name is case sensitive. Password is used by the database server to identify the user.


TDS Protocol version

This parameter applies only to Microsoft SQL / Sybase SQL databases. Serveral protocol types are supported. More information about protocol usage is shown by clicking on the yellow info icon.

Actions

After you have enterd all parameters the connection to the database can be tested. A click on the button labeled “Test Database access” checks if access to the database is granted by the database server. A dialog box informs about success or non success of the test.


ODS Inst 5.png


At the end of the database configuration dialog you should save the settings the first time by selecting the "Save" button. Afterwards the name of the datasource is available within the left column under the “Data Sources” headline. You can continue configuration by selction of the datasource within the Settings window and pressing the "Edit" button .

Database Table

Within SQL databases data is stored in tables and within the tables in attributes. Once ODS has established the connection to the external database, the available tables can be displayed by pressing the button “Query database tables”

ODS Inst 6.png

Note: Within V3R2 only one table can be selected here


If it is not clear which attributes are available in a table the “Preview database table” button can be used to read the attributes from the selected table.

ODS Inst 7.png

A browser function allows you to step through the selected table and to display the content of the attributes.

Field Mappings

Within the penultimate step you map the SQL database table attributes to the Open Directory fields, which are finally presented by the LDAP server. The mapping is done in the way, that the available attributes of the selected table are presented at the left side and the Open Directory Sevices (LDAP) field at the right side.

The table attribute can be chosen by a click to the attribute within the drop down menu. An already used and assigned attribute is presented in blue color. Multiple assignments of an attributes to different LDAP fields are allowed.

ODS Inst 8.png

At the Open Directory Service side the available fields are presented also within a drop down menu. Selection is done by mouse click. Within the drop down menue only the “available” (not assigned) fields are presented for mapping.

A preview function allows to check the output of the assigned Open Directory fields by browsing through the database entries.

Already mapped fields are displayed on the screen. Add and remove operations are available for editing the mapping.

Note: Mapping of multiple attributes to one Open Directory field is not possible.

Number conversion

Within a connected database telephone numbers could be stored in different formats. The Number Conversion function allows you to normalize the the retrieved phone numbers into a full qualified number format (e.g. +12 (345) 678 90). This is could be necessary for correct caller identification. Number conversion can be configured per data source. The stored phone numbers within the source database are not modified.

ODS Inst 9.png

If You enable the function by a tic within the “Active” checkbox, the additional dial parameters are presented and can be populated. You have to determine the localization, for which the telephonenumber were entered in teh database and enter the suitable data. In case that the data source is located at the same place as the ODS (OSO system) the apropriate settings can be imported from the OSO configuration by pressing the button "Query System Settings". You can also configure if the phone numbers in the database starts with a dialout prefix or not. This setting is needed, as in some counties a ‘0’ as prefix cannot be differentiated from the national access prefix (e.g. in Germany).

Note: Number conversation can fail in some cases, e.g. if parts of the phone number are missing or if an odd notation is used. In this case the telephone number have to be corrected within the datasource.

LDAP Test

Administration menue of Data Sources offers also the test of the configured parameters. Selection of the LDAP Test Tab allows user to check, if the the settings and configuration made before, deliver the requested data.

ODS Inst 10.png


Pressing the button “Run test” will seach within the configured datasource and displays all entries of the datasource and the content of the configured Open Directory Service data fields (LDAP fields).

In case that the output within some fields does not meet the expectation (e.g. Phone number conversion is wrong), configuration can be adjusted and the test can be repeated as often until the results are satisfying.

Save Datasource configuration

At the end of the database configuration the settings should be saved. Afterwards the data source name is available within the left column under the “Data Sources” headline . Further information about the data source is available within the Data Sources Main Window. A data source can be modified or deleted by pressing the appropriate button after data source selection within the Main Window.

Maintenance

The maintenance screen allows you to check the current status of the Open Directory Service and to restart the service. The actual status is displayed in a status line .

ODS Inst 11.png

For better visibility a colored icon represents the status in addition to the plain text.

  • Green: Status “Running” No action required
  • Grey: Status “Not Running” Activation of the service required.

If a red, blinking dot apperas in the main navigation behind the Maintenance text an Open Directory Service restart is required due to configuration modifications.

The restart of the Open Directory Service can be performed by a mouse click on the Restart button. If the “Restart” button ist greyed out, Open Directory Service has to be activated first at the “Settings” page.

A succeeding dialog box informs you about the result of the restart action.