How to connect OpenScape Business to LDAP Server
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Contents
Preface
This How To describes the connection of OpenScape Business to LDAP server. Information given here should help to understand the configuration in general.
The examples demonstrate the connection to a Microsoft Active Directory and to the embedded Open Directory Service. All shown data and screenshots are examples only, which are used to demonstrate the capabilities.
Note
Description refers to OpenScape Business V1R3. Deviations may occur in later versions.
General Information
OpenScape Business offers two different ways to connect to a LDAP server:
- System LDAP connection
- UC Suite LDAP connection
Each kind of LDAP connection enables different LDAP clients, which are connected to OpenScape Business, to access the retrieved data.
System LDAP connection
The system LDAP client allows searching for LDAP entries with HFA phones, selecting the search result and to use them to perform a call.
Note:
Only LDAP version 2 with authentication is supported.
The required configuration is done in the OpenScape Business Administration Portal
Expert Mode --> Telephony Server --> Basic Settings --> System --> LDAP
Within this dialog screen the following information have to be filled in at minimum to enable the System LDAP function
- IP address of the LDAP server
- Username
- Password / Confirm password
- Basic DN
In addition the phone display setting needs to be set in the OpenScape Business Administration Portal:
Expert Mode --> Telephony Server --> Basic Settings --> System --> Display
Set the value “Internal Phonebook” from “Internal” to “All”. After these settings are done the System LDAP search function is enabled at the HFA phones.
Use case:
- Hook off HFA phone
- Apply “Phonebook” *
- Select the “LDAP” directory
- Type a name with the keypad and apply the entered search string
- Select the requested search result and apply the selected entry to perform a call
Example: System LDAP connection to Active Directory
Within this example the following is assumed:
- IP address of the Active Directory LDAP server: 198.6.127.33
- Username: Administrator@win2k8dom.net
- Password / Confirm password: Password of the Administrator user
- Basic DN: dc=win2k8dom,dc=net
Note:
Remote access to the Active Directory for OpenScape Business has to be granted by network administrator
UC Suite LDAP connection
The UC Suite LDAP connection enables the UC Suite clients:
- myPortal for Desktop
- myPortsl for Outlook
- myAttendant
- myAgent
to perform caller identification and directory search within the directories of the connected LDAP Server.
The needed configuration is done in the OpenScape Office Assistant. Please navigate to this page to perform the changes in the OpenScape Office Assistant:
Expert Mode --> Application --> OpenScape Business UC Suite --> External Providers Config --> Contact Providers --> LDAP
Use the “Add” button to add a new LDAP configuration to the OpenScape Office:
Parameter Explanation
Parameter | Value / Remark |
---|---|
Name: |
This name describes the LDAP connection. |
Server: |
IP address of the LDAP Server. In case, that the Open Directory Service is used as LDAP server, |
Port: | Port of the LDAP Server (Default is 389) |
LDAP Base Distinguehed Name | This parameter has to be set as configured within the LDAP server. For OpenDirectory Service use: dc=web |
User name: | This parameter has to be set as configured within the LDAP server. For OpenDirectory Service use: uid=uc,dc=web |
Password: |
The password has to be set as configured within the LDAP server. |
LDAP field mapping:
Afterwards the LDAP field of OSO UC myPortral/myPortal for Outlook clients must be mapped to the appropriate ODS LDAP fields. The mapping within the picture above shows the assignment.
All entries become effective within OSO after saving.
LDAP connection to a Microsoft Active Directory
The following example values are used in this manual:
LDAP server ip-address: 198.6.127.33
Administrator username: administrator@win2k8dom.net
Domain name: win2k8dom.net
Prerequisites
Before you start, you have to check some prerequisites otherwise the connection fails.
- Fully installed and operational OSO system
- ODS is active within the OSO system
- ODS is successfully connected to an external database
UC Suite LDAP Client Settings
My Portal and myPortal for Outlook can also search data in external directories, which are connected to the ODS.
To do so you have to configure the LDAP connection of the UC Suite within the OpenScape Office system in the way that points to the ODS.
At first you have to open the Administration Portal of OpenScape office, choose the expert mode and selct the UC Suite configuration.
A left mouse click to "UC Suite" opens the configuration dialog. Selection of "External Provider config" opens the Dialog for LDAP server configuration. Another mouse click to the "Add" button grants access to the creation of a new LDAP connection. The following settings have to be entered.
Example: UC Suite LDAP connection to Active Directory
Within this example the following is assumed:
- IP address of the Active Directory LDAP server: 198.6.127.33
- Username: Administrator@win2k8dom.net
- Password / Confirm password: Password of the Administrator user
- Basic DN: dc=win2k8dom,dc=net
OpenScape Business UC Suite LDAP settings for Active Directory access
Note:
Remote access to the Active Directory for OpenScape Business has to be granted by network administrator