Talk:HiPath Xpressions Compact
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Revision as of 22:43, 29 August 2007 by Davide.poletto (talk | contribs) (Xpressions Compact 2.5/3.0 Front-end/Back-end support for HiPath ProCenter Agile V7: an issue on datasheets ?)
Hi Bossekr,
does actually HiPath DLI supports only the deployment of HFA (CorNet IP) system clients:
- Comfort Open P100 IP
- Comfort Open P300 IP
- OpenStage 20
- OpenStage 40
- OpenStage 60
- OpenStage 80
- optiPoint 410 entry
- optiPoint 410 economy
- optiPoint 410 economy plus
- optiPoint 410 standard
- optiPoint 410 advance
- optiPoint 420 economy
- optiPoint 420 economy plus
- optiPoint 420 standard
- optiPoint 420 advance
- optiPoint 600 office V5
- optiPoint WL2 professional
- optiClient 130
without supporting their SIP variants ?
Is it a design limit or a temporary lack of workpoints .xml templates on the HiPath DLI side ?
Should this means that HiPath DLS is, in the while, still needed on HiPath system IVM equipped with a mass (or a mix) of SIP workpoints connected ?
regards,
User:Davide.poletto Kimera 23:04, 7 August 2007 (CEST)
Hi all,
what's about Front-end/Back-end support of Xpressions Compact V2.5/V3.0 for HiPath ProCenter Agile V7 ?
Have a look at this HiPath-Forum thread for further references.
regards,
User:Davide.poletto Kimera 00:43, 30 August 2007 (CEST)
