User talk:Davide.poletto
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
This is a DRAFT
optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview
... ...
Surveying Mode
This new mode of operation is:
- Selectable via the hidden "Service" menu
- Used to give real-time information of the connected Wireless LAN Access Point (AP)
- Available on optiPoint WL2 professional family either in:
- HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
- SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
- Used to enhance the serviceability of the WLAN workpoints
- Used to perform WLAN site surveys and deployments.
Service Menu
optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu
Accessing
Steps to access the hidden "Service" menu on the workpoint:
- Turn off the optiPoint WL2 professional
- Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (Power button) at the same time
- The hourglass icon appears in the phone display
- Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
- The optiPoint WL2 professional powers up showing "Service" on the display
- Enter code 76200 to access displayed "Service" menu
Once into the "Service" menu, the items list is:
- Network-Scan (listed as first item)
- SW Release
- ...
- Surveying Mode (listed as last item)
Test
| Text A | Text B |
| Hardware features | |
|---|---|
| Text A | Text B |
