Difference between revisions of "optiPoint SIP HW compatibility"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (Update to V7) |
m (V7.0 info) |
||
| Line 2: | Line 2: | ||
{{up}} [[optiPoint 410/420 CorNet IP (HFA) to SIP migration]] | {{up}} [[optiPoint 410/420 CorNet IP (HFA) to SIP migration]] | ||
</div> | </div> | ||
| − | To operate [[optiPoint]] [[SIP]] phones with [[ | + | To operate [[optiPoint]] [[SIP]] phones with [[optiPoint_410/420_S_general_information_to_SIP_V7.0|SIP V7]] firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also [[optiPoint 410/420 S general information to SIP V6.0]]. |
== Hardware support == | == Hardware support == | ||
Revision as of 15:38, 19 February 2009
To operate optiPoint SIP phones with SIP V7 firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also optiPoint 410/420 S general information to SIP V6.0.
Contents
Hardware support
Part number
All phones ordered as SIP phones can be used for SIP V7 without restrictions. Phones originally ordered as CorNet IP (HFA), can be migrated to SIP, beginning with a specific hardware revision level (see table below).
The part number on the housing's bottom side shows the phone type originally ordered:
- A for CorNet IP (HFA) phones, example: S30817-S7212-A107-1
- L for SIP V4.1 phones, example: S30817-S7212-L107-1
- M for SIP V5.0 or V6.0 phones, example: S30817-S7212-M107-1
Compatibility of originally CorNet IP phones
| CorNet IP Phone | Housing color | Part number | Compatible version |
|---|---|---|---|
| optiPoint 410 entry | arctic | S30817-S7201-A101-X | X ≥ 9 |
| mangan | S30817-S7201-A107-X | X ≥ 16 | |
| optiPoint 410 economy | arctic | S30817-S7202-A101-X | X ≥ 9 |
| mangan | S30817-S7202-A107-X | X ≥ 15 | |
| optiPoint 410 economy plus | arctic | S30817-S7212-A101-X | X ≥ 5 |
| mangan | S30817-S7212-A107-X | X ≥ 6 | |
| optiPoint 410 standard | arctic | S30817-S7203-A101-X | X ≥ 9 |
| mangan | S30817-S7203-A107-X | X ≥ 17 | |
| optiPoint 410 advance | arctic | S30817-S7204-A101-X | X ≥ 9 |
| mangan | S30817-S7204-A107-X | X ≥ 14 | |
| optiPoint 420 economy | arctic | S30817-S7209-A101-X | X ≥ 1 |
| mangan | S30817-S7209-A107-X | X ≥ 1 | |
| optiPoint 420 economy plus | arctic | S30817-S7210-A101-X | X ≥ 3 |
| mangan | S30817-S7210-A107-X | X ≥ 3 | |
| optiPoint 420 standard | arctic | S30817-S7211-A101-X | X ≥ 3 |
| mangan | S30817-S7211-A107-X | X ≥ 3 | |
| optiPoint 420 advance | arctic | S30817-S7207-A101-X | X ≥ 8 |
| mangan | S30817-S7207-A107-X | X ≥ 6 |
Additionally it is necessary that the phone hardware contains the INCA©-IP chip V1.3.
Software support
| Software | Version |
|---|---|
| Bootrom (NetBoot) | V2.01 |
| optiPoint display module software | DM01.07 |
Compliant products
| Product | Version |
|---|---|
| HiPath 2000 | V1.0 SMR 6 or higher |
| HiPath 3000/5000 | V5.0 SMR 11 V6.0 SMR 6 or higher |
| HiPath 4000 | V3.0 |
| HiPath 8000 | V2.0 SMR 03 PS01E01 V2.1 SMR 02 PS01E03 or higher |
| Deployment Service | V1.0 CV199.31 or higher |
The Deployment Tool is not released for SIP V6.0 phones. Use Deployment Service instead.
