Difference between revisions of "User talk:Davide.poletto"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
(→Test 1) |
m (→Submenu List) |
||
| Line 31: | Line 31: | ||
=== Submenu List === | === Submenu List === | ||
| − | Once into the "Service" menu, the items | + | Once into the "Service" menu, the items are listed in this order: |
| − | * Network | + | * Network Scan |
* SW Release | * SW Release | ||
| − | * | + | * QS Data |
| − | * Surveying Mode | + | * Speechpath test |
| + | * Working time | ||
| + | * Contrast | ||
| + | * WPS | ||
| + | * Factory Default | ||
| + | * Clean Up | ||
| + | * Backlight Switch | ||
| + | * Surveying Mode | ||
Revision as of 21:42, 3 April 2007
This is a DRAFT:
optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview
... ...
Surveying Mode
This new mode of operation is:
- Selectable via the hidden "Service" menu
- Used to give real-time information of the connected Wireless LAN Access Point (AP)
- Available on optiPoint WL2 professional family either in:
- HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
- SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
- Used to enhance the serviceability of the WLAN workpoints
- Used to perform WLAN site surveys and deployments.
Service Menu
optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu
Accessing
Steps to access the hidden "Service" menu on the workpoint:
- Turn off the optiPoint WL2 professional
- Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (Power button) at the same time
- The hourglass icon appears in the phone display
- Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
- The optiPoint WL2 professional powers up showing "Service" on the display
- Enter code 76200 to access displayed "Service" menu
Once into the "Service" menu, the items are listed in this order:
- Network Scan
- SW Release
- QS Data
- Speechpath test
- Working time
- Contrast
- WPS
- Factory Default
- Clean Up
- Backlight Switch
- Surveying Mode
| Feature | EVM (Entry Voice Mail) | IVM (Integrated Voice Mail) | Note |
|---|---|---|---|
| Port (Channels) | 2 | 8 / 24 | 8 for ..., 24 for ... |
| Total storage capacity | 2 h | 100 h | |
| Mailboxes | up to 24 | up to 500 | |
| Mailboxes greeting messages | up to 2 | up to 4 | |
| Mailboxes greeting messages length | up to 1 min | up to 3 min | |
| Auto Attendant (AA) mailboxes | up to 4 | up to 100 | |
| Auto Attendant (AA) mailboxes greeting messages | up to 2 | up to 4 | |
| Auto Attendant (AA) mailboxes greeting messages length | up to 2 min | up to 8 min | |
| Information mailboxes | up to 100 | ||
| Information mailboxes greeting messages | up to 4 | ||
| Information mailboxes greeting messages length | up to 20 min |
Test
Also a test:
| Release | HiPath DLS V1.0 | HiPath 2000 V1.0 | HiPath 3000 V5.0 | HiPath 3000 V6.0 | HiPath 4000 V3.0 | HiPath 8000 V2.0 | HiPath 8000 V2.1 | HiPath 8000 V2.2 |
|---|---|---|---|---|---|---|---|---|
| V6 R0.62.0 | R1.27.0[1] [2] |
SMR 6 1st CV[3] | R12.1.0[4] | R7.1.0[5] | CV05 RLC05 | R3.0.0[6] | R2.0.0[7] | R1.0.3[8] |
| V6 R0.60.0 | R1.23.0[9] | SMR 6 1st CV[3] | R12.1.0[4] | R7.1.0[5] | CV05 RLC05 | R3.0.0[6] | R2.0.0[7] | R1.0.3[10] |
| V6 R0.58.0 | R1.23.0[11] | SMR 6 1st CV[3] | R11.0.0[12] | R6.0.0[13] | CV05 RLC05 | R3.0.0 | R2.0.0 | R1.0.3[14] |
Test 1
Also a test (1):
| Release | HiPath DLS V1.0 | HiPath 2000 V1.0 | Note | ||||||
|---|---|---|---|---|---|---|---|---|---|
| V6 R0.62.0 |
|
|
Test for other general comments |
- ↑ 1.0 1.1 HiPath DLS V1.0 with software version HI-DLS.10.199.41 (released 18/12/2006) or newer. Cite error: Invalid
<ref>tag; name "DLS_V1_R1.27.0" defined multiple times with different content - ↑ This version of HiPath DLS V1.0 is necessary for optiPoint 410 / 420 S V6.0 Mobility feature and Audio-Mode feature.
- ↑ 3.0 3.1 3.2 3.3 HiPath 2000 V1.0 with software version HE620Y.06.475 (released 07/08/2006) or newer. Cite error: Invalid
<ref>tag; name "H2k_V1_SMR6_1st_CV" defined multiple times with different content - ↑ 4.0 4.1 HiPath 3000 V5.0 with software version HE600A.12.545 (released 25/09/2006) or newer.
- ↑ 5.0 5.1 HiPath 3000 V6.0 with software version HE620A.07.545 (released 25/09/2006) or newer.
- ↑ 6.0 6.1 HiPath 8000 V2.0 SMR 3 with Patch Set PS05 Emergency E07 (released dd/mm/2006) or newer.
- ↑ 7.0 7.1 HiPath 8000 V2.1 SMR 3 with Patch Set PS05 Emergency E00 (released dd/mm/2006) or newer.
- ↑ HiPath 8000 V2.2 SMR 1 with Patch Set PS?? Emergency E?? (released dd/mm/2006) or newer.
- ↑ HiPath DLS V1.0 with software version HI-DLS.10.199.37 (released dd/mm/2006) or newer.
- ↑ HiPath 8000 V2.2 SMR 1 with Patch Set PS10 Emergency E07 (released 03/11/2006) or newer.
- ↑ HiPath DLS V1.0 with software version HI-DLS.10.199.34 (released dd/mm/2006) or newer.
- ↑ HiPath 3000 V5.0 with software version HE600A.11.xxx (released dd/mm/2006) or newer.
- ↑ HiPath 3000 V6.0 with software version HE620A.06.xxx (released dd/mm/2006) or newer.
- ↑ HiPath 8000 V2.2 SMR 1 with Patch Set PS10 Emergency E03 (released 26/09/2006) or newer.
- ↑ 15.0 15.1 Note: Recommended with HiPath DLS V1.0 software version HI-DLS.10.199.41 released 18/12/2006 or newer.
- ↑ Note: tested with HiPath 2000 V1.0 R7.0.0 software version HE620Y.07.554 released on dd/01/2007.
