Revision as of 12:05, 16 December 2006

This could be an improvement:

The new software versioning scheme rules each application software to be named as:

V x[.y] R m.f.h

Where V and R stand for:

• V = Version
  • The Version field is identified by:
    • x = Major Release as result of major feature enhancements with M3 status of product.
    • y = as an optional additional numbering.

• R = Release
  • The Release field is identified by:
    • m = Minor Release as result of minor feature enhancements (covers TRs and CRs)
    • f = Fix Release (FR) as result of a collection of solutions to TRs and HFs (covers only TRs, no CRs)
    • h = Hotfix (HF) as result of immediate solution to just one TR or only few TRs and to all TRs for Focal and/or Hot accounts (a Hotfix comprises all previous HFs, as example those cumulated since the latest FR)

Note:
FR = Fix Release
TR = Trouble Report
CR = Change Request
HF = Hot Fix

An example:

• Product Name: optiPoint 410/420 SIP V6.0
• Software Version: V6 R0.62.0

This example shows that the optiPoint 410/420 SIP V6.0 software release version considered:

• Refers to Version V6 (as Major Release), the additional .0 could be omitted in this case.
• Refers to Release R0.62.0
  • 0 (as Minor Release) so it doesn't introduce any new minor feature enhancements.
  • 62 (as Fix Release) so it introduces collection of solutions to TRs and HFs
  • 0 (as Hotfix) so it doesn't introduce any new immediate solution to just one TR or only few TRs

This is a DRAFT

optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview

... ...

Surveying Mode

This new mode of operation is:

• Selectable via the hidden "Service" menu
• Used to give real-time information of the connected Wireless LAN Access Point (AP)
• Available on optiPoint WL2 professional family either in:
  • HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
  • SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
• Used to enhance the serviceability of the WLAN workpoints
• Used to perform WLAN site surveys and deployments.

Service Menu

optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu

Accessing

Steps to access the hidden "Service" menu on the workpoint:

• Turn off the optiPoint WL2 professional
• Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (Power button) at the same time
• The hourglass icon appears in the phone display
• Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
• The optiPoint WL2 professional powers up showing "Service" on the display
• Enter code 76200 to access displayed "Service" menu

Submenu List

Once into the "Service" menu, the items list is:

• Network-Scan (listed as first item)
• SW Release
• ...
• Surveying Mode (listed as last item)