Views

Difference between revisions of "User talk:Davide.poletto"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (→‎Test)
(Date discussion)
 
(17 intermediate revisions by 2 users not shown)
Line 10: Line 10:
  
 
* Selectable via the hidden "Service" menu
 
* Selectable via the hidden "Service" menu
−
* Used to give real-time information of the connected Wireless LAN Access Point ([[AP]])
+
* Used to give real-time information of the connected Wireless LAN Access Point ([[Access Point|AP]])
 
* Available on optiPoint WL2 professional family either in:
 
* Available on optiPoint WL2 professional family either in:
 
** HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
 
** HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
Line 31: Line 31:
  
 
=== Submenu List ===
 
=== Submenu List ===
−
Once into the "Service" menu, the items list is:
+
Once into the "Service" menu, the items are listed in this order:
  
−
* Network-Scan (''listed as first item'')
+
* Network Scan
 
* SW Release
 
* SW Release
−
* ...
+
* QS Data
−
* Surveying Mode (''listed as last item'')
+
* Speechpath test
 +
* Working time
 +
* Contrast
 +
* WPS
 +
* Factory Default
 +
* Clean Up
 +
* Backlight Switch
 +
* Surveying Mode
  
  
Line 103: Line 110:
 
|}
 
|}
  
−
=== Test ===
+
== Interoperability Matrix table TEST ==
  
−
Also a test:
+
Just to incorporate informations about:
  
−
{| {{DefaultTable}} style="text-align:center"
+
* Minimal (supported since...but no technician/field engineer should use this one because since this version "a lot" of development was done, this should be seen as the version since which the device was supported first time)
 +
* Suggested/Recommended (this versione should be used in order to have fixed all the annoying bugs discovered since the Minimal version)
 +
 
 +
Probably a Tested version label is not so useful (there is the recommended label yet).
 +
 
 +
Note: Fictionary informations used.
 +
 
 +
<br/>
 +
 
 +
{| border="1"
 
! Release
 
! Release
 
! HiPath DLS V1.0
 
! HiPath DLS V1.0
−
! [[HiPath 2000|HiPath 2000 V1.0]]
+
! HiPath 2000 V1.0
−
! [[HiPath 3000|HiPath 3000 V5.0]]
+
! Note
−
! [[HiPath 3000|HiPath 3000 V6.0]]
 
−
! HiPath 4000 V3.0
 
−
! HiPath 8000 V2.0
 
−
! HiPath 8000 V2.1
 
−
! HiPath 8000 V2.2
 
 
|-
 
|-
−
| [[optiPoint 410/420 S Release Notes#V6 R0.62.0|V6 R0.62.0]]
+
| align="left" | [[optiPoint 410/420 S Release Notes#V6 R0.62.0|V6 R0.62.0]]
−
| R1.27.0<ref name="DLS_V1_R1.27.0">'''HiPath DLS V1.0''' with software version '''HI-DLS.10.199.41''' (released 18/12/2006) or newer.</ref><br/><ref name="DLS_V1_R1.27.0_Mobility">This version of HiPath DLS V1.0 is necessary for optiPoint 410 / 420 S V6.0 Mobility feature and Audio-Mode feature.</ref>
+
| align="center" |  
−
| SMR 6 1st CV<ref name="H2k_V1_SMR6_1st_CV">'''HiPath 2000 V1.0''' with software version '''HE620Y.06.475''' (released 07/08/2006) or newer.</ref>
+
{| class="noborder" style="background:#ABCDEF;"
−
| R12.1.0<ref name="H3k_V5_R12.1.0">'''HiPath 3000 V5.0''' with software version '''HE600A.12.545''' (released 25/09/2006) or newer.</ref>
+
| align="left" | Supported since: R1.27.0
−
| R7.1.0<ref name="H3k_V6_R7.1.0">'''HiPath 3000 V6.0''' with software version '''HE620A.07.545''' (released 25/09/2006) or newer.</ref>
 
−
| CV05 RLC05
 
−
| R3.0.0<ref name="H8k_V2.0_R3.0.0">'''HiPath 8000 V2.0''' SMR 3 with Patch Set PS05 Emergency E07 (released dd/mm/2006) or newer.</ref>
 
−
| R2.0.0<ref name="H8k_V2.1_R2.0.0">'''HiPath 8000 V2.1''' SMR 3 with Patch Set PS05 Emergency E00 (released dd/mm/2006) or newer.</ref>
 
−
| R1.0.3<ref name="H8k_V2.2_R1.0.3_PS??E??">'''HiPath 8000 V2.2''' SMR 1 with Patch Set PS?? Emergency E?? (released dd/mm/2006) or newer.</ref>
 
 
|-
 
|-
−
| [[optiPoint 410/420 S Release Notes#V6 R0.60.0|V6 R0.60.0]]
+
| align="left" | Tested with: R1.27.0<ref name="DLS_V1_R1.27.0">''Note'': tested with HiPath DLS V1.0 software version HI-DLS.10.199.41 released 18/12/2006.</ref>
−
| R1.23.0<ref name="DLS_V1_R1.23.0">'''HiPath DLS V1.0''' with software version '''HI-DLS.10.199.37''' (released dd/mm/2006) or newer.</ref>
 
−
| SMR 6 1st CV<ref name="H2k_V1_SMR6_1st_CV">'''HiPath 2000 V1.0''' with software version '''HE620Y.06.475''' (released 07/08/2006) or newer.</ref>
 
−
| R12.1.0<ref name="H3k_V5_R12.1.0">'''HiPath 3000 V5.0''' with software version '''HE600A.12.545''' (released 25/09/2006) or newer.</ref>
 
−
| R7.1.0<ref name="H3k_V6_R7.1.0">'''HiPath 3000 V6.0''' with software version '''HE620A.07.545''' (released 25/09/2006) or newer.</ref>
 
−
| CV05 RLC05
 
−
| R3.0.0<ref name="H8k_V2.0_R3.0.0">'''HiPath 8000 V2.0''' SMR 3 with Patch Set PS05 Emergency E07 (released dd/mm/2006) or newer.</ref>
 
−
| R2.0.0<ref name="H8k_V2.1_R2.0.0">'''HiPath 8000 V2.1''' SMR 3 with Patch Set PS05 Emergency E00 (released dd/mm/2006) or newer.</ref>
 
−
| R1.0.3<ref name="H8k_V2.2_R1.0.3_PS10E07">'''HiPath 8000 V2.2''' SMR 1 with Patch Set PS10 Emergency E07 (released 03/11/2006) or newer.</ref>
 
 
|-
 
|-
−
| [[optiPoint 410/420 S Release Notes#V6 R0.58.0|V6 R0.58.0]]
+
| align="left" | Recommended: R2.30.0<ref name="DLS_V1_R2.30.0">''Note'': recommended with HiPath DLS V1.0 software version HI-DLS.10.230.20 or newer.</ref>
−
| R1.23.0<ref name="DLS_V1_R1.xx.0">'''HiPath DLS V1.0''' with software version '''HI-DLS.10.199.34''' (released dd/mm/2006) or newer.</ref>
+
|}
−
| SMR 6 1st CV<ref name="H2k_V1_SMR6_1st_CV">'''HiPath 2000 V1.0''' with software version '''HE620Y.06.475''' (released 07/08/2006) or newer.</ref>
+
| align="center" |
−
| R11.0.0<ref name="H3k_V5_R11.0.0">'''HiPath 3000 V5.0''' with software version '''HE600A.11.xxx''' (released dd/mm/2006) or newer.</ref>
+
{| class="noborder" style="background-color:#ABCDEF;"
−
| R6.0.0<ref name="H3k_V6_R6.0.0">'''HiPath 3000 V6.0''' with software version '''HE620A.06.xxx''' (released dd/mm/2006) or newer.</ref>
+
| align="left" | Supported: SMR 6 1st CV<ref name="H2k_V1_SMR6_1st_CV">''Note'': supported since HiPath 2000 V1.0 SMR 6 1st CV software version HE620Y.06.475 released on 07/08/2006.</ref>
−
| CV05 RLC05
 
−
| R3.0.0
 
−
| R2.0.0
 
−
| R1.0.3<ref name="H8k_V2.2_R1.0.3_PS10E03">'''HiPath 8000 V2.2''' SMR 1 with Patch Set PS10 Emergency E03 (released 26/09/2006) or newer.</ref>
 
 
|-
 
|-
 +
| align="left" | Tested: R7.0.0<ref name="H2k_V1_R7.0.0">''Note'': tested with HiPath 2000 V1.0 R7.0.0 software version HE620Y.07.554 released on dd/01/2007.</ref>
 +
|-
 +
| align="left" | Recommended: R9.7.0<ref name="H2k_V1_R9.7.0">''Note'': recommended with HiPath 2000 V1.0 R9.7.0 software version HE620Y.09.681 released on 17/05/2007.</ref>
 
|}
 
|}
 +
| valign="top" | Test for other general comments
 +
|-
 +
|}
 +
 +
<div class="references-small">
 +
<references/>
 +
</div>
 +
 +
 +
== HiPath MobileConnect TEST ==
 +
 +
HiPath MobileConnect is an enterprise Fixed-Mobile Convergence ([[FMC]]) solution that seamlessly unifies fixed enterprise [[VoIP]], [[VoWLAN]] and cellular mobility
 +
 +
The solution consists of two components:
 +
 +
* HiPath MobileConnect Appliance
 +
Located at the central site, sitting on the wired network between the Wireless LAN and the SIP Communication system it continually monitors and manages mobile user sessions regardless of whether they are on the corporate or public network
 +
 +
* HiPath MobileConnect Client
 +
Software that resides on the dual-mode mobile handset and works with the HiPath MobileConnect Appliance to navigate enterprise-cellular exchange
 +
 +
== Date discussion ==
 +
 +
Hi Davide,
 +
 +
I saw you changed the optiPoint SIP V7 table....
 +
 +
I think we all must think about a clear definition for the table-value "date".
 +
 +
US guys thinks DD/MM/YY, the Europe guys will think MM/DD/YY - often I'm a little bit confused myself... are the two digits at the beginning for month or for day... everytime I have to compare the older release dates ;-)
 +
 +
I think a clear definition like the one specified in ISO 8601 (format  YYYY-MM-DD) will help to prevent misunderstandings.
 +
 +
 +
  
−
<references />
+
regards,
 +
Stefan

Latest revision as of 23:31, 10 June 2009

This is a DRAFT:

optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview

... ...

Surveying Mode

This new mode of operation is:

  • Selectable via the hidden "Service" menu
  • Used to give real-time information of the connected Wireless LAN Access Point (AP)
  • Available on optiPoint WL2 professional family either in:
    • HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
    • SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
  • Used to enhance the serviceability of the WLAN workpoints
  • Used to perform WLAN site surveys and deployments.

Service Menu

optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu

Accessing

Steps to access the hidden "Service" menu on the workpoint:

  • Turn off the optiPoint WL2 professional
  • Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (Power button) at the same time
  • The hourglass icon appears in the phone display
  • Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
  • The optiPoint WL2 professional powers up showing "Service" on the display
  • Enter code 76200 to access displayed "Service" menu

Submenu List

Once into the "Service" menu, the items are listed in this order:

  • Network Scan
  • SW Release
  • QS Data
  • Speechpath test
  • Working time
  • Contrast
  • WPS
  • Factory Default
  • Clean Up
  • Backlight Switch
  • Surveying Mode


Feature EVM (Entry Voice Mail) IVM (Integrated Voice Mail) Note
Port (Channels) 2 8 / 24 8 for ..., 24 for ...
Total storage capacity 2 h 100 h
Mailboxes up to 24 up to 500
Mailboxes greeting messages up to 2 up to 4
Mailboxes greeting messages length up to 1 min up to 3 min
Auto Attendant (AA) mailboxes up to 4 up to 100
Auto Attendant (AA) mailboxes greeting messages up to 2 up to 4
Auto Attendant (AA) mailboxes greeting messages length up to 2 min up to 8 min
Information mailboxes up to 100
Information mailboxes greeting messages up to 4
Information mailboxes greeting messages length up to 20 min

Interoperability Matrix table TEST

Just to incorporate informations about:

  • Minimal (supported since...but no technician/field engineer should use this one because since this version "a lot" of development was done, this should be seen as the version since which the device was supported first time)
  • Suggested/Recommended (this versione should be used in order to have fixed all the annoying bugs discovered since the Minimal version)

Probably a Tested version label is not so useful (there is the recommended label yet).

Note: Fictionary informations used.


Release HiPath DLS V1.0 HiPath 2000 V1.0 Note
V6 R0.62.0
Supported since: R1.27.0
Tested with: R1.27.0[1]
Recommended: R2.30.0[2]
Supported: SMR 6 1st CV[3]
Tested: R7.0.0[4]
Recommended: R9.7.0[5]
Test for other general comments
  1. ↑ Note: tested with HiPath DLS V1.0 software version HI-DLS.10.199.41 released 18/12/2006.
  2. ↑ Note: recommended with HiPath DLS V1.0 software version HI-DLS.10.230.20 or newer.
  3. ↑ Note: supported since HiPath 2000 V1.0 SMR 6 1st CV software version HE620Y.06.475 released on 07/08/2006.
  4. ↑ Note: tested with HiPath 2000 V1.0 R7.0.0 software version HE620Y.07.554 released on dd/01/2007.
  5. ↑ Note: recommended with HiPath 2000 V1.0 R9.7.0 software version HE620Y.09.681 released on 17/05/2007.


HiPath MobileConnect TEST

HiPath MobileConnect is an enterprise Fixed-Mobile Convergence (FMC) solution that seamlessly unifies fixed enterprise VoIP, VoWLAN and cellular mobility

The solution consists of two components:

  • HiPath MobileConnect Appliance

Located at the central site, sitting on the wired network between the Wireless LAN and the SIP Communication system it continually monitors and manages mobile user sessions regardless of whether they are on the corporate or public network

  • HiPath MobileConnect Client

Software that resides on the dual-mode mobile handset and works with the HiPath MobileConnect Appliance to navigate enterprise-cellular exchange

Date discussion

Hi Davide,

I saw you changed the optiPoint SIP V7 table....

I think we all must think about a clear definition for the table-value "date".

US guys thinks DD/MM/YY, the Europe guys will think MM/DD/YY - often I'm a little bit confused myself... are the two digits at the beginning for month or for day... everytime I have to compare the older release dates ;-)

I think a clear definition like the one specified in ISO 8601 (format YYYY-MM-DD) will help to prevent misunderstandings.



regards, Stefan

Retrieved from "http://wiki.unify.com/index.php?title=User_talk:Davide.poletto&oldid=23333"