Difference between revisions of "CallBridge Collection"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
(→Compatibility Matrix) |
(→Computer SW) |
||
(30 intermediate revisions by the same user not shown) | |||
Line 25: | Line 25: | ||
=== CallBridge IP === | === CallBridge IP === | ||
− | CallBridge IP is the TAPI service provider for PC-based telephony using OpenStage HFA telephones via LAN and OpenStage 60/80 T telephones via IP-over-USB protocol. | + | CallBridge IP is the TAPI service provider for PC-based telephony using OpenStage DeskPhone CP, OpenStage DeskPhone IP ,OpenStage HFA telephones via LAN and OpenStage 60/80 T telephones via IP-over-USB protocol. |
[[Image:CB_IP_V2_OSBiz.png|450px|CallBride IP with OpenStage HFA devices]] | [[Image:CB_IP_V2_OSBiz.png|450px|CallBride IP with OpenStage HFA devices]] | ||
Line 48: | Line 48: | ||
== Compatibility Matrix == | == Compatibility Matrix == | ||
− | The following information is related to CallBride Collection V2R3. | + | The following information is related to CallBride Collection V2R3.11.0 <br> |
− | The table below shows a general compatibility matrix of each CallBridge TSP regarding | + | <br> |
− | + | The table below shows a general compatibility matrix of each CallBridge TSP regarding communication system family, devices and adapters.<br> | |
− | + | '''Please note within this context:''' <br> | |
− | + | Unify supports only released communications platforms, devices and adapters, which are still available in the actual product portfolio. For discontinued products and PC operating systems no support is given in general. This applies also for discontinued components in combination wirh the actual CallBridge collection SW. For details about supported devices see also the release note of the platform. <br> | |
− | |||
Line 98: | Line 97: | ||
| ||optiPoint 600 office HFA|||| | | ||optiPoint 600 office HFA|||| | ||
|- | |- | ||
− | | |||||| | + | | ||OpenScape DeskPhone IP 35 G HFA|||| |
+ | |- | ||
+ | | ||OpenScape DeskPhone IP 55 G HFA|||| | ||
+ | |- | ||
+ | || ||OpenScape DeskPhone CP 200 HFA|||| | ||
+ | |- | ||
+ | | ||OpenScape DeskPhone CP 400 HFA|||| | ||
+ | |-| | ||
+ | | ||OpenScape DeskPhone CP 600 HFA|||| | ||
+ | |-||||||| | ||
|- | |- | ||
| '''Adapter'''||optiPoint acoustic adapter||optiPoint acoustic adapter||optiset E akustik Adapter | | '''Adapter'''||optiPoint acoustic adapter||optiPoint acoustic adapter||optiset E akustik Adapter | ||
Line 116: | Line 124: | ||
| |||||| | | |||||| | ||
|- | |- | ||
− | | Communication platform||OpenScape Business||OpenScape Business||HiPath 4000 (< V2 *1) | + | | '''Communication platform''' ||OpenScape Business||OpenScape Business||HiPath 4000 (< V2 *1) |
|- | |- | ||
| ||OpenScape Office||OpenScape Office||HiPath 3000 (< V7 *1) | | ||OpenScape Office||OpenScape Office||HiPath 3000 (< V7 *1) | ||
Line 140: | Line 148: | ||
+ | ( *1 only supported in combination with a Windows 32 bit operating system | ||
+ | |||
+ | == Prerequisites == | ||
+ | |||
+ | For operation of CallBride collection some HW / SW prereqisites have to be fulfilled | ||
+ | |||
+ | === HW/SW prerequisites === | ||
+ | |||
+ | ==== Computer HW ==== | ||
+ | |||
+ | '''Minimum HW-requirements''' | ||
+ | |||
+ | * Pentium or compatible CPU | ||
+ | * 128 MB RAM | ||
+ | * 25 MB free hard disk memory | ||
+ | * A free physical interface | ||
+ | ** Ethernet LAN Interface for CallBride IP | ||
+ | ** USB Interface for CallBride TU | ||
+ | ** RS232 Interface for CallBride TA | ||
+ | <br> | ||
+ | '''Please note''':<br> | ||
+ | The Microsoft Windows operating system and the used application may require a more powerful processor, RAM and more memory space on the hard disk.. | ||
+ | ==== Computer SW ==== | ||
+ | '''Operating systems for Callbride Collection TAPI Service Providers''' | ||
+ | * Microsoft Windows 7 (32/64 Bit) Service Pack: SP1 | ||
+ | * Microsoft Windows 8 (32/64 Bit) except Windows RT | ||
+ | * Microsoft Windows 8.1 (32/64 Bit except Windows RT | ||
+ | * Microsoft Windows 10 (32/64 Bit) | ||
+ | |||
+ | '''Operating systems for USB Driver for OpenStage 40 T and OpenStage 60/80 (RNDIS Driver)''' | ||
+ | |||
+ | * Microsoft Windows 7 (32/64 Bit) Service Pack: SP1 | ||
+ | * Microsoft Windows 8 (32/64 Bit) except Windows RT | ||
+ | * Microsoft Windows 8.1 (32/64 Bit except Windows RT | ||
+ | * Microsoft Windows 10 (32/64 Bit) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | '''Please note:''' <br> | |
− | + | For the following platforms 64 bit version of Microsoft Windows 7 or Windows 8.x can only be used with Callbridge Collection from a specific SW version on upwards: | |
* HiPath 2000 ≥ V2 | * HiPath 2000 ≥ V2 | ||
* HiPath 3000 ≥ V7 | * HiPath 3000 ≥ V7 | ||
* HiPath 4000 ≥ V2 | * HiPath 4000 ≥ V2 | ||
* HiPath OpenOffice EE/ME | * HiPath OpenOffice EE/ME | ||
− | |||
− | |||
− | + | Microsoft Server operating systems have not been tested in combination with CallBridge collection and are not released for CallBride Collection V2. | |
+ | Some devices connected to older communication platform version are only supported by 32 bit OS. For more information see compatibility matrix. | ||
+ | |||
+ | === Cabeling === | ||
+ | |||
+ | Depending on the used CallBride variant different cables for the connection between computer and telephone device are required. | ||
+ | * Ethernet 10 / 100 base T cable for connection of CallBride IP | ||
+ | * USB cable for connection of CallBridge TU | ||
+ | ** A standard USB cable (with USB Type A and Type B plugs) can be used for OpenStage 30/40/60/80 T | ||
+ | ** A specific USB cable with Type A and an angled Type B plug has to be used for optiPoint 500 telephones. (e.g. S30267-Z360-A30) | ||
+ | * RS232(V.24) 1:1 cable | ||
+ | ** 25pin male to 9 pin female cable for connection using the data adapter | ||
+ | ** 9 pin male to 9 pin female cable and a data- or control- adapter for connection of CallBride TA | ||
+ | |||
+ | |||
+ | == Documentation == | ||
+ | |||
+ | Some documents in various languages are available for CallBridge Collection. | ||
+ | As there are: | ||
+ | |||
+ | * Datasheets | ||
+ | * Installation manuals | ||
+ | * Technical release note | ||
+ | |||
+ | The documents can be obtained from the following source: | ||
− | * | + | * {{Partner Portal}} of Unify |
− | + | <!-- | |
− | |||
− | |||
+ | * {{File-DL|CallBridge Collection Installation Manual|pdf}} valid for V2 R 1.2.0 | ||
+ | --> | ||
− | |||
− | |||
− | |||
− | |||
+ | {| {{DefaultTable}} | ||
+ | ! width="25%" | Documentation | ||
+ | ! width="20%" | Version / Date | ||
+ | ! width="10%" | File | ||
+ | ! width="45%" | Disclaimer | ||
+ | |- | ||
+ | | | ||
+ | CallBridge Collection | ||
− | |||
− | |||
− | |||
+ | |||
+ | CorNet TS TAPI Service Provider | ||
+ | |||
+ | Supplement to the | ||
+ | Microsoft Windows Telephony Application | ||
+ | Programmer's Guide | ||
+ | Version 2.0 | ||
+ | | | ||
+ | V2.0 / November 2004 | ||
+ | | | ||
+ | {{File-DL|CBV2_PG|zip}} | ||
+ | | | ||
+ | You may download and use this file only if you agree to the [[About This Wiki#Disclaimer|DISCLAIMER]]. If You disagree, your are not allowed to download the file. | ||
+ | |||
+ | Any support regarding the TAPI implentation is only be given to registered partners within the [http://www.unify.com/main/Partners/Technology-Partners.aspx HiPath Technologie Partner Program] | ||
+ | |} | ||
Line 371: | Line 294: | ||
--> | --> | ||
+ | == Software Delivery / Deployment == | ||
+ | The CallBridge Collection software package can be downloaded free of charge from the Software Download Server (SWS) within the {{Partner Portal}} of Unify. The package contains, in addition to the TAPI service provider setup, all necessary USB drivers, the installation manual and a README.TXT with up-to-date information on the product. | ||
− | == | + | == Licensing == |
+ | Callbridge Collection SW is not licensed | ||
− | + | == SW Upgrade / Migration == | |
− | |||
− | + | == Useful Tools == | |
− | |||
− | |||
− | + | == Further technical Information == | |
− | |||
− | |||
− | + | === How To === | |
− | |||
− | |||
− | == How To == | ||
Suitable task descriptions with links to corresponding procedures in the [[How To]] article(s) | Suitable task descriptions with links to corresponding procedures in the [[How To]] article(s) | ||
− | == Whitepapers == | + | === Whitepapers === |
Suitable white paper document titles with links to the corresponding [[White Papers|White Paper]] article(s) | Suitable white paper document titles with links to the corresponding [[White Papers|White Paper]] article(s) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Latest revision as of 14:07, 9 October 2017
Contents
Overview
The CallBridge Collection is a suite of specific CorNet TS TAPI Service Providers (CorNet TS TSPs) grouped as a small powerful middleware application that provides open interfaces to implement 1st Party Computer Telephony Integration (CTI).
Beneath the communication platforms and devices of the current portfolio of Unify CallBride Collection supports also older devices and platforms, which have been replaced by new models, versions or which have been phased out over the time.
Please Note:
Unify supports the functionality of CallBridge Collection in combination with communication systems and devices of the current Unify product portfolio, which are released within the actual technical release note of Callbride Collection. Devices and communications platforms, which are no longer part of the Unify product portfolio are not blocked within the installation and administration of CallBridge Collection, but in case of problems of any kind Unify does not give any support. The same applies for the support of actual Microsoft Windows Operating systems in case that a specific constellation has been released only for an older version of the Operation system.
Features
- Service provider for first party telephony applications.
- Runs with TAPI Versions 2.x and 3.0
- Supports applications written for TAPI Versions 1.3, 1.4, 2.x and 3.0.
- Operates in a phone-centric connectivity model.
- Supports one phone device, which has to be connected via serial COM, USB or IP interface.
- Supports one line device.
- Supports device-specific extensions.
TAPI Service Provider Variants
For historical reasons CallBridge Collection consists of three different TAPI service providers:
CallBridge IP
CallBridge IP is the TAPI service provider for PC-based telephony using OpenStage DeskPhone CP, OpenStage DeskPhone IP ,OpenStage HFA telephones via LAN and OpenStage 60/80 T telephones via IP-over-USB protocol.
Figure: CallBridge IP with OpenStage HFA devices connected to OpenScape Business
CallBridge TU
CallBridge TU is a TAPI service provider for PC-based telephony using OpenStage 30/40 T telephones via a USB interface.
Figure: CallBridge TU with OpenStage T devices connected to OpenScape Business
CallBridge TA
CallBridge TA is a TAPI service provider for PC-based telephony using devices with RS232 interface. Within portfolio of Unify only devices with IP or USB interface are available. Therefore CallBride TA can be used only in combination with old devices like: Optiset E telephones with an Optiset E data adapter or Optiset E control adapter.
Figure: CallBridge TA with optiset E devices connected to HiPath 3000
Compatibility Matrix
The following information is related to CallBride Collection V2R3.11.0
The table below shows a general compatibility matrix of each CallBridge TSP regarding communication system family, devices and adapters.
Please note within this context:
Unify supports only released communications platforms, devices and adapters, which are still available in the actual product portfolio. For discontinued products and PC operating systems no support is given in general. This applies also for discontinued components in combination wirh the actual CallBridge collection SW. For details about supported devices see also the release note of the platform.
Product | CallBridge IP | CallBridge TU | CallBridge TA |
Telephone | OpenStage 15 HFA | OpenStage 30 T | optiset E basic |
OpenStage 20 HFA | OpenStage 40 T | optiset E advance | |
OpenStage 20E HFA | optiPoint 500 basic | optiset E advance plus | |
OpenStage 40 HFA | optiPoint 500 standard | optiset E advance conference | |
OpenStage 60 HFA | optiPoint 500 standard SL | optiset E memory | |
OpenStage 80 HFA | optiPoint 500 advance | ||
OpenStage 60 T | optiPoint 600 office TDM | ||
OpenStage 80 T | |||
optiPoint 410 entry HFA | |||
optiPoint 410 economy HFA | |||
optiPoint 410 economy plus HFA | |||
optiPoint 410 standard HFA | |||
optiPoint 410 advance HFA | |||
optiPoint 420 economy HFA | |||
optiPoint 420 economy plus HFA | |||
optiPoint 420 standard HFA | |||
optiPoint 420 advance HFA | |||
optiPoint 600 office HFA | |||
OpenScape DeskPhone IP 35 G HFA | |||
OpenScape DeskPhone IP 55 G HFA | |||
OpenScape DeskPhone CP 200 HFA | |||
OpenScape DeskPhone CP 400 HFA | |||
OpenScape DeskPhone CP 600 HFA | |||
Adapter | optiPoint acoustic adapter | optiPoint acoustic adapter | optiset E akustik Adapter |
optiPoint recorder adapter | optiPoint ISDN adapter | optiset E contact Adapter | |
optiPoint recorder adapter | optiset E control Adapter | ||
optiset E data Adapter | |||
optiset E headset Adapter | |||
optiset E headset plus Adapter | |||
optiset E ISDN Adapter | |||
Communication platform | OpenScape Business | OpenScape Business | HiPath 4000 (< V2 *1) |
OpenScape Office | OpenScape Office | HiPath 3000 (< V7 *1) | |
HiPath OpenOffice EE/ME | HiPath OpenOffice EE/ME | HiPath AllServe 150 *1 | |
HiPath 4000 (< V2 *1) | HiPath 4000 (< V2 *1) | Hicom 300 E / H *1 | |
HiPath 3000 (< V7 *1) | HiPath 3000 (< V7 *1) | Hicom 150 E / H *1 | |
HiPath 2000 (< V2 *1) | HiPath 2000 (< V2 *1) | Hicom 100 E *1 | |
HiPath AllServe 150 *1 | |||
Hicom 300 E / H *1 | |||
Hicom 150 E / H *1 | |||
Hicom 100 E *1 | |||
( *1 only supported in combination with a Windows 32 bit operating system
Prerequisites
For operation of CallBride collection some HW / SW prereqisites have to be fulfilled
HW/SW prerequisites
Computer HW
Minimum HW-requirements
- Pentium or compatible CPU
- 128 MB RAM
- 25 MB free hard disk memory
- A free physical interface
- Ethernet LAN Interface for CallBride IP
- USB Interface for CallBride TU
- RS232 Interface for CallBride TA
Please note:
The Microsoft Windows operating system and the used application may require a more powerful processor, RAM and more memory space on the hard disk..
Computer SW
Operating systems for Callbride Collection TAPI Service Providers
- Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
- Microsoft Windows 8 (32/64 Bit) except Windows RT
- Microsoft Windows 8.1 (32/64 Bit except Windows RT
- Microsoft Windows 10 (32/64 Bit)
Operating systems for USB Driver for OpenStage 40 T and OpenStage 60/80 (RNDIS Driver)
- Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
- Microsoft Windows 8 (32/64 Bit) except Windows RT
- Microsoft Windows 8.1 (32/64 Bit except Windows RT
- Microsoft Windows 10 (32/64 Bit)
Please note:
For the following platforms 64 bit version of Microsoft Windows 7 or Windows 8.x can only be used with Callbridge Collection from a specific SW version on upwards:
- HiPath 2000 ≥ V2
- HiPath 3000 ≥ V7
- HiPath 4000 ≥ V2
- HiPath OpenOffice EE/ME
Microsoft Server operating systems have not been tested in combination with CallBridge collection and are not released for CallBride Collection V2.
Some devices connected to older communication platform version are only supported by 32 bit OS. For more information see compatibility matrix.
Cabeling
Depending on the used CallBride variant different cables for the connection between computer and telephone device are required.
- Ethernet 10 / 100 base T cable for connection of CallBride IP
- USB cable for connection of CallBridge TU
- A standard USB cable (with USB Type A and Type B plugs) can be used for OpenStage 30/40/60/80 T
- A specific USB cable with Type A and an angled Type B plug has to be used for optiPoint 500 telephones. (e.g. S30267-Z360-A30)
- RS232(V.24) 1:1 cable
- 25pin male to 9 pin female cable for connection using the data adapter
- 9 pin male to 9 pin female cable and a data- or control- adapter for connection of CallBride TA
Documentation
Some documents in various languages are available for CallBridge Collection. As there are:
- Datasheets
- Installation manuals
- Technical release note
The documents can be obtained from the following source:
- Partner Portal of Unify
Documentation | Version / Date | File | Disclaimer |
---|---|---|---|
CallBridge Collection
CorNet TS TAPI Service Provider Supplement to the Microsoft Windows Telephony Application Programmer's Guide Version 2.0 |
V2.0 / November 2004 |
You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file. Any support regarding the TAPI implentation is only be given to registered partners within the HiPath Technologie Partner Program |
Software Delivery / Deployment
The CallBridge Collection software package can be downloaded free of charge from the Software Download Server (SWS) within the Partner Portal of Unify. The package contains, in addition to the TAPI service provider setup, all necessary USB drivers, the installation manual and a README.TXT with up-to-date information on the product.
Licensing
Callbridge Collection SW is not licensed
SW Upgrade / Migration
Useful Tools
Further technical Information
How To
Suitable task descriptions with links to corresponding procedures in the How To article(s)
Whitepapers
Suitable white paper document titles with links to the corresponding White Paper article(s)