Views

Difference between revisions of "CallBridge Collection"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(→‎Computer SW)
 
(41 intermediate revisions by the same user not shown)
Line 8: Line 8:
  
 
'''Please Note''':<br>
 
'''Please Note''':<br>
−
Unify supports the functionality of CallBridge Collection in combination with communication systems and devices of the current Unify product portfolio, which are released within the actual technical release note of Callbride Collection.<br>
+
Unify supports the functionality of CallBridge Collection in combination with communication systems and devices of the current Unify product portfolio, which are released within the actual technical release note of Callbride Collection. Devices and communications platforms, which are no longer part of the Unify product portfolio are not blocked within the installation and administration of CallBridge Collection, but in case of problems of any kind Unify does not give any support. The same applies for the support of actual Microsoft Windows Operating systems in case that a specific constellation has been released only for an older version of the Operation system.
−
Devices and communications platforms, which are no longer part of the Unify product portfolio are not blocked within the installation and administration of CallBridge Collection, but in case of problems of any kind Unify does not give any support. The same applies for the support of actual Microsoft Windows Operating systems in case that a specific constellation has been released only for an older version of the Operation system.
 
  
 
== Features ==
 
== Features ==
Line 21: Line 20:
 
* Supports device-specific extensions.
 
* Supports device-specific extensions.
  
−
== TSP Variants ==
+
== TAPI Service Provider Variants ==
−
For historical reasons CallBridge Collection consists of three different TAPI service provider:
+
For historical reasons CallBridge Collection consists of three different TAPI service providers:
−
* CallBridge TA,
 
−
* CallBridge TU,
 
−
* CallBridge IP
 
  
  
 
=== CallBridge IP ===
 
=== CallBridge IP ===
 +
CallBridge IP is the TAPI service provider for PC-based telephony using OpenStage DeskPhone CP, OpenStage DeskPhone IP ,OpenStage HFA telephones via LAN and OpenStage 60/80 T telephones via IP-over-USB protocol.
  
 +
[[Image:CB_IP_V2_OSBiz.png|450px|CallBride IP with OpenStage HFA devices]]
 +
 +
Figure: CallBridge IP with OpenStage HFA devices connected to OpenScape Business
  
 
=== CallBridge TU ===
 
=== CallBridge TU ===
 +
CallBridge TU is a TAPI service provider for PC-based telephony using OpenStage 30/40 T telephones via a USB interface.
 +
 +
[[Image:CB_TU_V2_OSBiz.png|450px|CallBride TU with OpenStage T devices]]
  
 +
Figure: CallBridge TU with OpenStage T devices connected to OpenScape Business
  
 
=== CallBridge TA ===
 
=== CallBridge TA ===
 +
CallBridge TA is a TAPI service provider for PC-based telephony using devices with RS232 interface.
 +
Within portfolio of Unify only devices with IP or USB interface are available. Therefore CallBride TA can be used only in combination with old devices like:
 +
Optiset E telephones with an Optiset E data adapter or Optiset E control adapter.
 +
 +
[[Image:CB_TA_V2_HP3k.png|450px|CallBride TA with optiset E devices]]
 +
 +
Figure: CallBridge TA with optiset E devices connected to HiPath 3000
 +
 +
== Compatibility Matrix ==
 +
The following information is related to CallBride Collection V2R3.11.0 <br>
 +
<br>
 +
The table below shows a general compatibility matrix of each CallBridge TSP regarding communication system family, devices and adapters.<br>
 +
'''Please note within this context:''' <br>
 +
Unify supports only released communications platforms, devices  and adapters, which are still available in the actual product portfolio. For discontinued products and PC operating systems no support is given in general. This applies also for discontinued components in combination wirh the actual CallBridge collection SW. For details about supported devices see also the release note of the platform. <br>
 +
 +
 +
{| {{DefaultTable}}
 +
| align="center" style="background:#f0f0f0;"|'''Product'''
 +
| align="center" style="background:#f0f0f0;"|'''CallBridge IP'''
 +
| align="center" style="background:#f0f0f0;"|'''CallBridge TU'''
 +
| align="center" style="background:#f0f0f0;"|'''CallBridge TA'''
 +
|-
 +
| '''Telephone'''||OpenStage 15 HFA||OpenStage 30 T||optiset E basic
 +
|-
 +
| ||OpenStage 20 HFA||OpenStage 40 T||optiset E advance
 +
|-
 +
| ||OpenStage 20E HFA||optiPoint 500 basic||optiset E advance plus
 +
|-
 +
| ||OpenStage 40 HFA||optiPoint 500 standard||optiset E advance conference
 +
|-
 +
| ||OpenStage 60 HFA||optiPoint 500 standard SL||optiset E memory
 +
|-
 +
| ||OpenStage 80 HFA||optiPoint 500 advance||
 +
|-
 +
| ||OpenStage 60 T||optiPoint 600 office TDM||
 +
|-
 +
| ||OpenStage 80 T||||
 +
|-
 +
| ||optiPoint 410 entry HFA||||
 +
|-
 +
| ||optiPoint 410 economy HFA||||
 +
|-
 +
| ||optiPoint 410 economy plus HFA||||
 +
|-
 +
| ||optiPoint 410 standard HFA||||
 +
|-
 +
| ||optiPoint 410 advance HFA||||
 +
|-
 +
| ||optiPoint 420 economy HFA||||
 +
|-
 +
| ||optiPoint 420 economy plus HFA||||
 +
|-
 +
| ||optiPoint 420 standard HFA||||
 +
|-
 +
| ||optiPoint 420 advance HFA||||
 +
|-
 +
| ||optiPoint 600 office HFA||||
 +
|-
 +
| ||OpenScape DeskPhone IP 35 G HFA||||
 +
|-
 +
| ||OpenScape DeskPhone IP 55 G HFA||||
 +
|-
 +
|| ||OpenScape DeskPhone CP 200 HFA||||
 +
|-
 +
| ||OpenScape DeskPhone CP 400 HFA||||
 +
|-|
 +
| ||OpenScape DeskPhone CP 600 HFA||||
 +
|-|||||||
 +
|-
 +
| '''Adapter'''||optiPoint acoustic adapter||optiPoint acoustic adapter||optiset E akustik Adapter
 +
|-
 +
| ||optiPoint recorder adapter||optiPoint ISDN adapter||optiset E contact Adapter
 +
|-
 +
| ||||optiPoint recorder adapter||optiset E control Adapter
 +
|-
 +
| ||||||optiset E data Adapter
 +
|-
 +
| ||||||optiset E headset Adapter
 +
|-
 +
| ||||||optiset E headset plus Adapter
 +
|-
 +
| ||||||optiset E ISDN Adapter
 +
|-
 +
| ||||||
 +
|-
 +
| '''Communication platform''' ||OpenScape Business||OpenScape Business||HiPath 4000 (< V2 *1)
 +
|-
 +
| ||OpenScape Office||OpenScape Office||HiPath 3000 (< V7 *1)
 +
|-
 +
| ||HiPath OpenOffice EE/ME||HiPath OpenOffice EE/ME||HiPath AllServe 150 *1
 +
|-
 +
| ||HiPath 4000 (< V2 *1)||HiPath 4000 (< V2 *1)||Hicom 300 E / H *1
 +
|-
 +
| ||HiPath 3000 (< V7 *1)||HiPath 3000 (< V7 *1)||Hicom 150 E / H *1
 +
|-
 +
| ||HiPath 2000 (< V2 *1)||HiPath 2000 (< V2 *1)||Hicom 100 E *1
 +
|-
 +
| ||||HiPath AllServe 150 *1||
 +
|-
 +
| ||||Hicom 300 E / H *1||
 +
|-
 +
| ||||Hicom 150 E / H *1||
 +
|-
 +
| ||||Hicom 100 E *1||
 +
|-
 +
|
 +
|}
  
  
 +
(  *1 only supported in combination with a Windows 32 bit operating system
  
 +
== Prerequisites ==
  
−
== Compatibility Matrix (>= V2 R2.1.0)==
+
For operation of CallBride collection some HW / SW prereqisites have to be fulfilled
  
−
The table below shows a general compatibility matrix of each CallBridge TSP regarding specific components of:
+
=== HW/SW prerequisites ===
−
* HiPath communication system family
 
−
* Supported Devices
 
−
* CallBridge Collection's workstation Operative System
 
  
 +
==== Computer HW ====
 +
 +
'''Minimum HW-requirements'''
 +
 +
* Pentium or compatible CPU
 +
* 128 MB RAM
 +
* 25 MB free hard disk memory
 +
* A free physical interface
 +
** Ethernet LAN Interface for CallBride IP
 +
** USB Interface for CallBride TU
 +
** RS232 Interface for CallBride TA
 +
<br>
 +
'''Please note''':<br>
 +
The Microsoft Windows operating system and the used application may require a more powerful processor, RAM and more memory space on the hard disk..
 +
 +
==== Computer SW ====
 +
 +
'''Operating systems for Callbride Collection TAPI Service Providers'''
 +
 +
* Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
 +
* Microsoft Windows 8 (32/64 Bit) except Windows RT
 +
* Microsoft Windows 8.1 (32/64 Bit except Windows RT
 +
* Microsoft Windows 10 (32/64 Bit)        
 +
 +
'''Operating systems for USB Driver for OpenStage 40 T and OpenStage 60/80 (RNDIS Driver)'''
 +
 +
* Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
 +
* Microsoft Windows 8 (32/64 Bit) except Windows RT
 +
* Microsoft Windows 8.1 (32/64 Bit except Windows RT
 +
* Microsoft Windows 10 (32/64 Bit)        
  
−
{| {{DefaultTable}}
 
−
! Component
 
−
! [[#CallBridge TS Providers|CallBridge TA]]
 
−
! [[#CallBridge TS Providers|CallBridge TU]]
 
−
! [[#CallBridge TS Providers|CallBridge IP]]
 
−
|-
 
−
| HiPath Communication System
 
−
| Hicom 100 E (>= V2.0.1)
 
−
| Hicom 100 E (>= V2.0.1)
 
−
| HiPatah 2000
 
−
|-
 
−
|
 
−
| Hicom 150 E / H
 
−
| Hicom 150 E / H
 
−
| HiPath 3000 V3.0 >= SMR09
 
−
|-
 
−
|
 
−
| Hicom 300 E / H
 
−
| Hicom 300 E / H
 
−
| HiPath 3000 V4.0 >= SMR02
 
−
|-
 
−
|
 
−
| HiPath AllServe 150
 
−
| HiPath AllServe 150
 
−
| HiPath 3000 V5.0 >= SMR03
 
−
|-
 
−
|
 
−
| HiPath 3000
 
−
| HiPath 3000
 
−
| HiPath 3000 >= V6.0
 
−
|-
 
−
|
 
−
| HiPath 4000
 
−
| HiPath 4000
 
−
| HiPath 4000 V1.0 >= SMR12
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| HiPath 4000 >= V2.0
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| HiPath OpenOffice ME/EE
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|-
 
−
| Phones
 
−
| optiset E basic
 
−
| optiPoint 500 basic
 
−
| optiPoint 410 entry HFA
 
−
|-
 
−
|
 
−
| optiset E advance
 
−
| optiPoint 500 standard
 
−
| optiPoint 410 economy HFA
 
−
|-
 
−
|
 
−
| optiset E advance plus
 
−
| optiPoint 500 standard SL
 
−
| optiPoint 410 economy plus HFA
 
−
|-
 
−
|
 
−
| optiset E advance conference
 
−
| optiPoint 500 advance
 
−
| optiPoint 410 standard HFA
 
−
|-
 
−
|
 
−
| optiset E memory
 
−
| OpenStage 30 T (1)
 
−
| optiPoint 410 advance HFA
 
−
|-
 
−
|
 
−
|
 
−
| OpenStage 40 T
 
−
| optiPoint 420 economy HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| optiPoint 420 economy plus HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| otiPoint 420 standard HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| optiPoint 420 advance HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 15 HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 20 HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 20E HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 40 HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 60 HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 80 HFA
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 60 T
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
| OpenStage 80 T
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|-
 
−
| Adapter
 
−
|optiset E data adapter
 
−
|
 
−
|
 
−
|-
 
−
|
 
−
|optiset E control adapter
 
−
|
 
−
|
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|-
 
−
| Operating Systems
 
−
| style="text-align:center" colspan="3"  | Microsoft Windows 2000 >= SP4 <br\> Microsoft Windows XP 32 Bit >= SP3 <br\>  Microsoft Windows Server 2003 R2 32 Bit >= SP2 <br\> Microsoft Windows Vista 32 Bit >= SP2 <br\> Microsoft Windows 7 32Bit (1) <br\> Microsoft Vista/Windows 7 64Bit (2)
 
−
|}
 
  
−
(1) CallBridge Collection with software version >= V2 R2.1.0 required
+
'''Please note:''' <br>
  
−
(2) Windows Vista/7 64 bit (>= V2 R3.0.0): CallBridge Collection supports Windows Vista/7 64 bit. But only, if the telephone is connected to one of following communication systems:  
+
For the following platforms 64 bit version of Microsoft Windows 7 or Windows 8.x can only be used with Callbridge Collection from a specific SW version on upwards:  
 
* HiPath 2000 ≥ V2  
 
* HiPath 2000 ≥ V2  
 
* HiPath 3000 ≥ V7  
 
* HiPath 3000 ≥ V7  
 
* HiPath 4000 ≥ V2  
 
* HiPath 4000 ≥ V2  
 
* HiPath OpenOffice EE/ME  
 
* HiPath OpenOffice EE/ME  
−
If the telephone is connected to another communcation system, CallBridge Collection supports only Windows XP/Vista/7/2003 32 bit.
 
  
  
−
== Requirements ==
+
Microsoft Server operating systems have not been tested in combination with CallBridge collection and are not released for CallBride Collection V2.
 +
Some devices connected to older communication platform version are only supported by 32 bit OS. For more information see compatibility matrix.
  
−
HW / SW
+
=== Cabeling ===
  
−
* CallBridge TA
+
Depending on the used CallBride variant different cables for the connection between computer and telephone device are required.
−
** A free COM port (COM1-COM16)
+
* Ethernet 10 / 100 base T cable for connection of CallBride IP
−
** A suitable V.24 cable for connecting the telephone to the computer
+
* USB cable for connection of CallBridge TU
−
** 10 MB free memory on the hard disk
+
** A standard USB cable (with USB Type A and Type B plugs) can be used for OpenStage 30/40/60/80 T
 +
** A specific USB cable with Type A and an angled Type B plug has to be used for optiPoint 500 telephones. (e.g. S30267-Z360-A30)
 +
* RS232(V.24) 1:1 cable
 +
** 25pin male to 9 pin female cable for connection using the data adapter
 +
** 9 pin male to 9 pin female cable  and a data- or control- adapter for connection of CallBride TA
  
  
−
* CallBridge TU
+
== Documentation ==
−
** A free USB port
 
−
** A USB cable for connecting the telephone to the computer. For optiPoint 500/600 "USB cable with angled connector" (ref. no. S30267-Z360-A30) is recommended.
 
−
** 10 MB free memory on the hard disk
 
  
 +
Some documents in various languages are available for CallBridge Collection.
 +
As there are:
  
−
* CallBridge IP
+
* Datasheets
−
** The computer and the corresponding IP telephone must be interconnected via LAN.
+
* Installation manuals
−
** 10 MB free memory on the hard disk
+
* Technical release note
 +
 
 +
The documents can be obtained from the following source:
 +
 
 +
* {{Partner Portal}} of Unify
 +
<!--
 +
 
 +
* {{File-DL|CallBridge Collection Installation Manual|pdf}} valid for V2 R 1.2.0
 +
-->
  
 +
 +
{| {{DefaultTable}}
 +
! width="25%" | Documentation
 +
! width="20%" | Version / Date
 +
! width="10%" | File
 +
! width="45%" | Disclaimer
 +
|-
 +
|
 +
CallBridge Collection
 +
 +
 +
 +
CorNet TS TAPI Service Provider
 +
 +
Supplement to the
 +
Microsoft Windows Telephony Application
 +
Programmer's Guide
 +
Version 2.0
 +
|
 +
V2.0 / November 2004
 +
|
 +
{{File-DL|CBV2_PG|zip}}
 +
|
 +
You may download and use this file only if you agree to the [[About This Wiki#Disclaimer|DISCLAIMER]]. If You disagree, your are not allowed to download the file.
 +
 +
Any support regarding the TAPI implentation is only be given to registered partners within the  [http://www.unify.com/main/Partners/Technology-Partners.aspx HiPath Technologie Partner Program]
 +
|}
  
  
Line 275: Line 294:
 
-->
 
-->
  
 +
== Software Delivery / Deployment ==
 +
The CallBridge Collection software package can be downloaded free of charge from the Software Download Server (SWS) within the {{Partner Portal}} of Unify. The package contains, in addition to the TAPI service provider setup, all necessary USB drivers, the installation manual and a README.TXT with up-to-date information on the product.
  
−
== Documentation ==
+
== Licensing ==
−
 
+
Callbridge Collection SW is not licensed
−
Some documents in various languages are available for CallBridge Collection.
 
−
As there are:
 
  
−
* Datasheets
+
== SW Upgrade / Migration ==
−
* Installation manuals
 
−
* Technical release note
 
  
−
The documents can be obtained from the following source:
+
== Useful Tools ==
  
−
* {{Partner Portal}} of Unify
+
== Further technical Information ==
−
<!--
 
  
−
* {{File-DL|CallBridge Collection Installation Manual|pdf}} valid for V2 R 1.2.0
 
−
-->
 
  
−
== How To ==
+
=== How To ===
 
Suitable task descriptions with links to corresponding procedures in the [[How To]] article(s)
 
Suitable task descriptions with links to corresponding procedures in the [[How To]] article(s)
  
−
== Whitepapers ==
+
=== Whitepapers ===
 
Suitable white paper document titles with links to the corresponding [[White Papers|White Paper]] article(s)
 
Suitable white paper document titles with links to the corresponding [[White Papers|White Paper]] article(s)
−
 
−
== See also ==
 
−
* [[Callbridge for Data (CB4D)]]
 
−
 
−
== External links ==
 
−
 
−
Suitable links to external web pages
 

Latest revision as of 14:07, 9 October 2017

You are here:  

Icon linkarrow.gif Home  Icon linkarrow.gif OpenScape Business  Icon linkarrow.gif CallBridge Collection

Overview

The CallBridge Collection is a suite of specific CorNet TS TAPI Service Providers (CorNet TS TSPs) grouped as a small powerful middleware application that provides open interfaces to implement 1st Party Computer Telephony Integration (CTI).

Beneath the communication platforms and devices of the current portfolio of Unify CallBride Collection supports also older devices and platforms, which have been replaced by new models, versions or which have been phased out over the time.

Please Note:
Unify supports the functionality of CallBridge Collection in combination with communication systems and devices of the current Unify product portfolio, which are released within the actual technical release note of Callbride Collection. Devices and communications platforms, which are no longer part of the Unify product portfolio are not blocked within the installation and administration of CallBridge Collection, but in case of problems of any kind Unify does not give any support. The same applies for the support of actual Microsoft Windows Operating systems in case that a specific constellation has been released only for an older version of the Operation system.

Features

  • Service provider for first party telephony applications.
  • Runs with TAPI Versions 2.x and 3.0
  • Supports applications written for TAPI Versions 1.3, 1.4, 2.x and 3.0.
  • Operates in a phone-centric connectivity model.
  • Supports one phone device, which has to be connected via serial COM, USB or IP interface.
  • Supports one line device.
  • Supports device-specific extensions.

TAPI Service Provider Variants

For historical reasons CallBridge Collection consists of three different TAPI service providers:


CallBridge IP

CallBridge IP is the TAPI service provider for PC-based telephony using OpenStage DeskPhone CP, OpenStage DeskPhone IP ,OpenStage HFA telephones via LAN and OpenStage 60/80 T telephones via IP-over-USB protocol.

CallBride IP with OpenStage HFA devices

Figure: CallBridge IP with OpenStage HFA devices connected to OpenScape Business

CallBridge TU

CallBridge TU is a TAPI service provider for PC-based telephony using OpenStage 30/40 T telephones via a USB interface.

CallBride TU with OpenStage T devices

Figure: CallBridge TU with OpenStage T devices connected to OpenScape Business

CallBridge TA

CallBridge TA is a TAPI service provider for PC-based telephony using devices with RS232 interface. Within portfolio of Unify only devices with IP or USB interface are available. Therefore CallBride TA can be used only in combination with old devices like: Optiset E telephones with an Optiset E data adapter or Optiset E control adapter.

CallBride TA with optiset E devices

Figure: CallBridge TA with optiset E devices connected to HiPath 3000

Compatibility Matrix

The following information is related to CallBride Collection V2R3.11.0

The table below shows a general compatibility matrix of each CallBridge TSP regarding communication system family, devices and adapters.
Please note within this context:
Unify supports only released communications platforms, devices and adapters, which are still available in the actual product portfolio. For discontinued products and PC operating systems no support is given in general. This applies also for discontinued components in combination wirh the actual CallBridge collection SW. For details about supported devices see also the release note of the platform.


Product CallBridge IP CallBridge TU CallBridge TA
Telephone OpenStage 15 HFA OpenStage 30 T optiset E basic
OpenStage 20 HFA OpenStage 40 T optiset E advance
OpenStage 20E HFA optiPoint 500 basic optiset E advance plus
OpenStage 40 HFA optiPoint 500 standard optiset E advance conference
OpenStage 60 HFA optiPoint 500 standard SL optiset E memory
OpenStage 80 HFA optiPoint 500 advance
OpenStage 60 T optiPoint 600 office TDM
OpenStage 80 T
optiPoint 410 entry HFA
optiPoint 410 economy HFA
optiPoint 410 economy plus HFA
optiPoint 410 standard HFA
optiPoint 410 advance HFA
optiPoint 420 economy HFA
optiPoint 420 economy plus HFA
optiPoint 420 standard HFA
optiPoint 420 advance HFA
optiPoint 600 office HFA
OpenScape DeskPhone IP 35 G HFA
OpenScape DeskPhone IP 55 G HFA
OpenScape DeskPhone CP 200 HFA
OpenScape DeskPhone CP 400 HFA
OpenScape DeskPhone CP 600 HFA
Adapter optiPoint acoustic adapter optiPoint acoustic adapter optiset E akustik Adapter
optiPoint recorder adapter optiPoint ISDN adapter optiset E contact Adapter
optiPoint recorder adapter optiset E control Adapter
optiset E data Adapter
optiset E headset Adapter
optiset E headset plus Adapter
optiset E ISDN Adapter
Communication platform OpenScape Business OpenScape Business HiPath 4000 (< V2 *1)
OpenScape Office OpenScape Office HiPath 3000 (< V7 *1)
HiPath OpenOffice EE/ME HiPath OpenOffice EE/ME HiPath AllServe 150 *1
HiPath 4000 (< V2 *1) HiPath 4000 (< V2 *1) Hicom 300 E / H *1
HiPath 3000 (< V7 *1) HiPath 3000 (< V7 *1) Hicom 150 E / H *1
HiPath 2000 (< V2 *1) HiPath 2000 (< V2 *1) Hicom 100 E *1
HiPath AllServe 150 *1
Hicom 300 E / H *1
Hicom 150 E / H *1
Hicom 100 E *1


( *1 only supported in combination with a Windows 32 bit operating system

Prerequisites

For operation of CallBride collection some HW / SW prereqisites have to be fulfilled

HW/SW prerequisites

Computer HW

Minimum HW-requirements

  • Pentium or compatible CPU
  • 128 MB RAM
  • 25 MB free hard disk memory
  • A free physical interface
    • Ethernet LAN Interface for CallBride IP
    • USB Interface for CallBride TU
    • RS232 Interface for CallBride TA


Please note:
The Microsoft Windows operating system and the used application may require a more powerful processor, RAM and more memory space on the hard disk..

Computer SW

Operating systems for Callbride Collection TAPI Service Providers

  • Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
  • Microsoft Windows 8 (32/64 Bit) except Windows RT
  • Microsoft Windows 8.1 (32/64 Bit except Windows RT
  • Microsoft Windows 10 (32/64 Bit)

Operating systems for USB Driver for OpenStage 40 T and OpenStage 60/80 (RNDIS Driver)

  • Microsoft Windows 7 (32/64 Bit) Service Pack: SP1
  • Microsoft Windows 8 (32/64 Bit) except Windows RT
  • Microsoft Windows 8.1 (32/64 Bit except Windows RT
  • Microsoft Windows 10 (32/64 Bit)


Please note:

For the following platforms 64 bit version of Microsoft Windows 7 or Windows 8.x can only be used with Callbridge Collection from a specific SW version on upwards:

  • HiPath 2000 ≥ V2
  • HiPath 3000 ≥ V7
  • HiPath 4000 ≥ V2
  • HiPath OpenOffice EE/ME


Microsoft Server operating systems have not been tested in combination with CallBridge collection and are not released for CallBride Collection V2. Some devices connected to older communication platform version are only supported by 32 bit OS. For more information see compatibility matrix.

Cabeling

Depending on the used CallBride variant different cables for the connection between computer and telephone device are required.

  • Ethernet 10 / 100 base T cable for connection of CallBride IP
  • USB cable for connection of CallBridge TU
    • A standard USB cable (with USB Type A and Type B plugs) can be used for OpenStage 30/40/60/80 T
    • A specific USB cable with Type A and an angled Type B plug has to be used for optiPoint 500 telephones. (e.g. S30267-Z360-A30)
  • RS232(V.24) 1:1 cable
    • 25pin male to 9 pin female cable for connection using the data adapter
    • 9 pin male to 9 pin female cable and a data- or control- adapter for connection of CallBride TA


Documentation

Some documents in various languages are available for CallBridge Collection. As there are:

  • Datasheets
  • Installation manuals
  • Technical release note

The documents can be obtained from the following source:


Documentation Version / Date File Disclaimer

CallBridge Collection


CorNet TS TAPI Service Provider

Supplement to the Microsoft Windows Telephony Application Programmer's Guide Version 2.0

V2.0 / November 2004

zip.png  CBV2_PG

You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file.

Any support regarding the TAPI implentation is only be given to registered partners within the HiPath Technologie Partner Program



Software Delivery / Deployment

The CallBridge Collection software package can be downloaded free of charge from the Software Download Server (SWS) within the Partner Portal of Unify. The package contains, in addition to the TAPI service provider setup, all necessary USB drivers, the installation manual and a README.TXT with up-to-date information on the product.

Licensing

Callbridge Collection SW is not licensed

SW Upgrade / Migration

Useful Tools

Further technical Information

How To

Suitable task descriptions with links to corresponding procedures in the How To article(s)

Whitepapers

Suitable white paper document titles with links to the corresponding White Paper article(s)

Retrieved from "http://wiki.unify.com/index.php?title=CallBridge_Collection&oldid=49615"