Revision as of 14:31, 26 November 2006

This is a DRAFT

optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview

... ...

Surveying Mode

This new mode of operation is:

• Selectable via the hidden "Service" menu
• Used to give real-time information of the connected Wireless LAN Access Point (AP)
• Available on optiPoint WL2 professional family either in:
  • HFA (CorNet IP) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
  • SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
• Used to enhance the serviceability of the WLAN workpoints
• Used to perform WLAN site surveys and deployments.

Service Menu

optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu

Accessing

Steps to access the hidden "Service" menu on the workpoint:

• Turn off the optiPoint WL2 professional
• Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (Power button) at the same time
• The hourglass icon appears in the phone display
• Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
• The optiPoint WL2 professional powers up showing "Service" on the display
• Enter code 76200 to access displayed "Service" menu

Submenu List

Once into the "Service" menu, the items list is:

• Network-Scan (listed as first item)
• SW Release
• ...
• Surveying Mode (listed as last item)

Test