Views

OpenScape Desk Phone CP HFA Release Notes

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search

OpenScape CP HFA V1R0

General information V1R0 (CP200 Support only)

What’s New?

Area Summary
Password Policy Several Security Policy settings for the User and Admin passwords can be set, for example required length and Expiry period.

V1 R0.6.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R0 product.

ID Summary
CallBridge:Restart of CP200 after conference is ended
CallBridge:No indication that the system is restarted and no actions possible after reconnection
CallBridge:Device restart is needed after user password is changed
Cancel mobility password cannot be configured via WBM
There is no mobility indication icon and reg. number in DLS
Change System Type String to be more generic

OpenScape CP HFA V1R1 (CP200/205/400/600 support)

General information V1R1

What’s New?

Area Summary Since Version Phone Type
EULA Information EULA License Information available in Web Based management. V1 R1.13.0 All
CP205 CP205 Support. The CP205 is the Gigabit Variant of the CP200. The same software for CP200 and CP205 is used. V1 R1.12.0 CP205
Auto Dial Timer There is now a configurable Auto Dial Timer for Blockdial Mode. The entered digits will be dialled if no further digits are entered within the configured time. (User -> Configuration -> Outgoing Calls -> Autodial delay (s) (Default is 6s) V1 R1.9.0 CP400/600
Block Dial Mode By Default the Phone does have the preferred Dialling Mode active that makes the best use of the Conversations functionality. So OK Key Press is required to dial the number.

Each user can configure that on his(her) own but admin can also configure that via DLS (IP Phone Configuration -> Features -> Call Related User settings)

V1 R1.9.0 CP400/600
If dialing is started On Hook and the handset is picked up the current entered digits are directly dialed. V1 R1.9.0 CP400/600
Bluetooth The new Bluetooth technology used in CP600 will contain the latest BT V4.1 standard with the low energy (LE) extensions and advanced feature set.

Proximity locking/unlocking is supported for Bluetooth Devices (only available for Local Lock)

V1 R1.9.0 CP400/600
Conference The phone will now display the number of conference members V1 R1.9.0 CP400/600
Conversation

List

Introduction of the Conversation concept. Connected Calls List, Contacts (LDAP, Exchange and System

Phonebook) and Call log combines into single list of items on the Deskphone Display. To mark all Conversations with new missed Calls as read at once a user password is required.

V1 R1.9.0 CP400/600
To prevent an unwanted close of the dialling window on edit in block dial mode the window is no longer closed on a Left key press. To close it for example in case of an Off Hook Call pickup attempt on CP600 Favourites keys use the menu key to gain access the Favourites screen. V1 R1.9.0 CP400/600
Dialling Screen for External Numbers To prevent the impression that the phone did not dial the entered digits, especially for external numbers where the CO provider will take some time to provide the dialling feedback, an intermediate screen will be shown. V1 R1.9.0 CP400/600
End of Call notification An end of Call or Transferred Call notification is shown on OS4k systems but suppressed on OSBiz systems due to sometimes irritating notifications in case of One number service and other advanced features on OSBiz. V1 R1.9.0 CP400/600
Energy Saver improvement Pickup Calls or Calls made from a CTI client will wake up the phone if it was in Power Save mode V1 R1.9.0 CP400/600
Exchange Acquiring contacts on the phone from an Exchange server (e.g. Microsoft Outlook) V1 R1.9.0 CP400/600
Favourites The Favourites screen does provide 16 Keys, with 2 layers each, which can be defined with Feature

functions or DSS Keys. With configured UC functionality they will provide extensive information about the UC status of the defined user

V1 R1.9.0 CP400/600
In case of Feature activation on a CP600 Favourites key the phone will not directly switch to the Idle screen and show the Text send from system as Confirmation/rejection. Shift Key press does not switch to Idle screen V1 R1.9.0 CP400/600
Group Call Log (OSBiz) Missed Group Calls are part of the Conversation List. They are sorted based on Timestamp but instead of displaying the timestamp the phone will display the Group Name that was called. To view the time the Conversation Details need to be opened.

OSBiz Versions prior to V2 R4:
Delete of Group Call on a specific device is already signalled from phone to system but currently the other group members are not informed from system about this action.
This is solved in OSBiz V2 R4 versions.

V1 R1.9.0 CP400/600
Handling of Multiple active

Calls (OSBiz)

If the User does have more than two active calls, for example multiple parties on hold the partner will be able to switch directly to each of them via the Conversation List by selecting the corresponding entry either by highlighting it and pressing OK or using the Key beside the displayed line of the user within the conversation list. A convenient access to the conversation list is provided within the Call Screen in case there are more than two parties.

Pressing the right arrow key on a highlighted conversation will bring up Contact details and Call History for the user, except for the current active call or if there are only two calls.

V1 R1.9.0 CP400/600
LDAP Enhances LDAP functionality: Dynamic call related LDAP lookup. If number of a call is not found in the local conversation information, the phone will perform an LDAP search using the number and dynamically create conversation based on the LDAP search result.

Get avatar picture from LDAP server (3 methods to be supported) LDAP template configuration in WBM Phone automatically Filter LDAP search results without phone number on quick search

V1 R1.9.0 CP400/600
Local Phone Lock In addition to the System provided Phone Locking the phone does provide a Local based Lock functionality. Activated by Long press of the # key unless Local Lock function is disabled by admin (System -> Security -> Access Control).

In this state the phone will only allow the acceptance of an Incoming call. This call can’t be transferred to any other station. Outgoing Calls are only possible to the configured Emergency numbers, so configuration of those in the phone settings is highly advised!

V1 R1.9.0 CP400/600
NTP Support of backup NTP Server V1 R1.9.0 All
Plug and Play To further improve the Upgrade Scenario from SIP to HFA the phone will now also preserve the DHCP

usage setting and in case of manual assigned IPv4 address also Subnet mask and Default router settings. IPv6 is not supported in CP HFA.

V1 R1.9.0 All
System Phonebook

(OSBiz only)

To access the System phonebook without UC configuration it is mandatory that the subscriber does have authentication activated in the System and this password is configured in the gateway settings.

Please note in case an OCAB system is used the IP of the OCAB board needs to be configured in the Admin -> Local functions -> UC Server to access the System Phonebook. The user is not required to enter any UC credentials as the Gateway configuration settings are used for the System Phonebook queries. The phone will perform a Reverse Lookup of the Number provided from the system on Outgoing and Incoming Calls so configuring of canonical dial settings is mandatory. Any further information available in the system Phonebook will be stored for this contact as well. This reverse lookup is only performed if no result is returned from a configured LDAP server.

V1 R1.9.0 CP400/600 advanced CP200 as with OpenStage 15
UC functionality

(OSBiz only)

If the User does have a UC license assigned in the System the phone can be used as a UC device. In default settings the same IP as the Gateway is used as the UC Server address, in case an OCAB system is used the IP of the OCAB board needs to be configured in the Admin -> Local functions -> UC Server

For UC functionality the User does have to enter his UC credentials in the User menu. If UC is configured the Out of office Key, the Top right key on the CP device, will provide access to the User to set his UC status information. Long press will directly toggle between Out of office and In Office.

V1 R1.9.0 CP400/600
WBM Paperlabel

(CP400)

The Web Based User menu does offer a download of a Microsoft Word XML document including the label texts, than can be printed. This is only supported with Chrome Browser. V1 R1.9.0 CP400/600
Password Policy Several Security Policy settings for the User and Admin passwords can be set, for example required length and Expiry period. V1 R1.9.0 CP400/600

V1 R1.9.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R1 product.

ID Summary
None This version is only for CP400/600

V1 R1.12.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R1 product.

ID Summary
NA15399550 Several phones rebooted after network security scan
NA15502210 Volume of open listening does not change
NA15556328 Phone isn't completely ignoring Audio States that are marked as Invalid
NA15589390 LDAP Address 2 and Role are missing from Contact's details

V1 R1.13.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R1 product.

Summary
Several Security and Stability Fixes
EULA License information available in Web Based management

V1 R1.15.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R1 product.

Summary
Unable to Return to Held call if Held Call was transferred (partially fixed for internal calls, fix for external calls pending)
Notification tone played on OpenScape 4000 is Ringer is set to HiPath Ringer Mode


V1 R1.16.0

Fixed Bugs

This section lists issues that have been resolved or closed for the OpenScape Desk Phone CP HFA V1R1 product.

Summary
Unable to Return to Held call if Held Call was transferred
Crash of CP600 V1 R1.13.0
CP400 - Chinese/Japanese/Korean language setting: wrong font used for numbers
CP400/600 DTB or XML Phone Services: Not shown correctly in Dialog screen

Please note that this does require OpenScape 4000 V8 R1.19.9!

Idle Screen Type not send to DLS
Mix of Names in case of Call is forwarded
DLS API is always showing a key module connected to Desk Phone CP400 and CP600
System Phonebook not available without UC configuration (Requires current V2 R4 of OSBiz)

OpenScape CP HFA V1R2 (CP100/200/205/400/600(E) support)

General information V1R2

What’s New?

Area Summary Since Version Phone Type
WBM Browser based file upload and delete of those for users. V1 R2.4.0 CP 400/600
Search Search can now be activated while Off Hook or in Consultation if no digits are entered in Dialler V1 R2.4.0 CP400/600
Conversation List Contact data Update Sources: Administrators can now configure if and from what sources an already locally stored Conversation is updated with

current data. In default state the Phone will always attempt to update the data from the following sources, if configured, in that order:

LDAP, System Phonebook/UC Directory (at OSBiz), Signalling Protocol. If at least one Update source is configured only the configured Update sources are checked for the initial lookup. This is not an error but expected as further calls to/from that number would update the Contact information with the data from the Update source anyway. For example a configured LDAP server will not be used for Reverse name lookup on incoming call if LDAP is not a configured update source. A manual search will still search in LDAP directory.

After switching all sources to OFF the phone will only do an initial lookup, for not yet stored numbers, on any configured lookup directories, priority as above, but following calls to and from that number will use the local stored data without any update (as previously).

Configuration via DLS, Local and WBM is possible.

V1 R2.7.0 CP400/600(E)
Canonical Dial Settings Improved handling with new parameter that in case the number received/dialled starts with the configured country code, but is a Local area code.

Configure option “Expect dial number”

V1 R2.7.0 CP400/600(E)
CP600E Added support of CP600E Hardware variant (CP600 with Black and White Display and without Bluetooth) V1 R2.7.0 CP600E
CP100 Added support of CP100 Hardware variant V1 R2.8.0 CP100

V1 R2.4.0

Fixed Bugs

This section lists issues that have been resolved or closed with the OpenScape Desk Phone CP HFA V1R2.4.0 version

Summary
No Indication about Redirecting number in case of Recall while Busy
Not able to set 0.0.0.0 as NTP address via DLS
CP200: Handsfree speakers are not loud enough
Text for User settings and Administrator settings are no longer translated to used language
Missed Calls are not showing up in Conversation until Call has ended
Crash of CP400 once a day
Missed call CP 400/600 HFA for answered Group Call
Slow performance of phone with great conversation list
CP600 DTB or XML Phone Services: Switching away from Dialog screen because "Waiting"
Idle Screen "Screen Type" not send to DLS
Wrong entries in conversations list with group call at OsBiz
Unable to Return to Held call if Held Call was transferred
Mix of Names in case of Call is forwarded
DLS API is always showing a key module connected to Desk Phone CP400 and CP600
LED for FPK goes on if Long press Key programming is attempted

V1 R2.7.0

Fixed Bugs

This section lists issues that have been resolved or closed with the OpenScape Desk Phone CP HFA V1R2.7.0 version

Summary
No audio preview for Pattern (ringer selection)
Phone crashes after a few days of usage
Wrong Canonical Conversion in case of number received which starts with country code
Delete option missing for Conversations afterWSI connection was dropped for short time
Wrong Indication about Recall while Busy
Overlapping Text (Dutch) in Dialling in Progress Screen
Forwarded Calls to a Group
CP HFA show Popup message that Call has ended when put on Hold
Phone show still connected call after transfer of Anonymous user has ended
Several Security Fixes

V1 R2.8.0

Fixed Bugs

This section lists issues that have been resolved or closed with the OpenScape Desk Phone CP HFA V1R2.8.0 version

Summary
After update to V1 R2.7.0 no logon to the Openscape Business Attendant possible
Temp. lookup result stored in Conversation List for transferred call
Mixed up Contact data when receiving two Group Calls from different numbers while busy
Pressed Keypad Keys are showing up twice
CP600 headset (Plantronics Voyager Legend) often disconnects and unable to reconnect
Search field entry is doubled
Phone remains in Incoming Call Screen after Call is accepted
System provided name not displayed for Unknown number in ringing state
Missed Call for answered Group Calls in case of Anonymous caller in Conv. List