Difference between revisions of "optiPoint 410/420 S factory reset"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (→By Web-based management) |
m (→By Web-based management) |
||
Line 9: | Line 9: | ||
Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW '''124816'''. | Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW '''124816'''. | ||
+ | |||
+ | |||
+ | [[Image:OptiPoint_410420_S_V6.0_FactorySetting1.jpg|thumb|left|Select the item "Reset factory setting"]] | ||
'''Note:''' Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM. | '''Note:''' Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM. | ||
− | + | ---- | |
=== By local phone procedure === | === By local phone procedure === |
Revision as of 11:45, 21 October 2006
The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.
Contents
optiPoint 410/420 S display phones
By Web-based management
Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW 124816.
Note: Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.
By local phone procedure
Ensure that call control is on the phone, not the DSM ???.
- Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
- Lift handset.
- Type in reset code .
- Type in reset password .
- Replace handset.
- If required, re-connect phone to LAN.
optiPoint 410 entry S
By Web-based management
(TBD)