Difference between revisions of "optiPoint 410/420 S factory reset"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (→By Web-based management) |
Betateilchen (talk | contribs) (→By local phone procedure) |
||
Line 22: | Line 22: | ||
* Lift handset. | * Lift handset. | ||
* Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]]. | * Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]]. | ||
− | * Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]]. | + | * Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]] and press the Confirm button (between arrow left & arrow right). |
* Replace handset. | * Replace handset. | ||
Revision as of 20:51, 14 December 2006
The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.
Contents
optiPoint 410/420 S display phones
By Web-based management
Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW 124816.
Note: Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.
By local phone procedure
Ensure that call control is on the phone, not the DSM ???.
- Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
- Lift handset.
- Type in reset code .
- Type in reset password and press the Confirm button (between arrow left & arrow right).
- Replace handset.
- If required, re-connect phone to LAN.
optiPoint 410 entry S
By Web-based management
(TBD)