Difference between revisions of "optiPoint 410/420 CorNet IP (HFA) to SIP migration"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (Migrate optiPoint 410/420 CorNet-IP/HFA phones to SIP moved to Migrate optiPoint 410/420 CorNet IP (HFA) phones to SIP: consistent spelling) |
|||
Line 1: | Line 1: | ||
− | + | This migration procedure is for upgrading an optiPoint 410/420 CorNet IP phone V5.1.2x to SIP V6.0.56 and later. | |
− | |||
− | |||
− | + | === Connect the phone to LAN === | |
+ | Connect the optiPoint Cornet IP phone to the [[LAN]] (<code>DHCP=on</code> is default). The assumption is that [[DHCP]] is available in your local area network. | ||
+ | The phone will reboot. | ||
− | + | Depending on the version of the CorNet IP application installed | |
+ | * either you may be prompted to enter the Fully qualified subscriber number, then follow [[#Subscriber number prompted|Subscriber number prompted]] | ||
+ | * or you may '''not''' be prompted to enter the Fully qualified subscriber number, then follow [[#Subscriber number is not prompted|Subscriber number is not prompted]]. | ||
− | + | === Subscriber number is prompted === | |
− | 2 | + | # Enter some digits like [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] ??? |
+ | # Confirm <code>Save Changes</code> with the [[Image:opk-ok.png]] key. | ||
+ | # The display will show:<br><code>Administration</code><br><code>01=Configuration?</code> | ||
+ | # Press the [[Image:opk-ok.png]] key. | ||
+ | Continue with [[#Enter Admin password|Enter Admin password]]. | ||
− | + | ==== Subscriber number is not prompted ==== | |
− | + | If you have not been prompted for the subscriber number, the display will show: | |
+ | : <code>Invalide GW Adress</code> or <code>No suscriber number</code> | ||
− | Administration | + | # Press the [[Image:opk-ok.png]] key. |
− | 01=Configuration? | + | # The display will show:<br><code>Administration</code><br><code>01=Configuration?</code> |
+ | # Press the [[Image:opk-ok.png]] key once more. | ||
− | + | === Enter Admin password === | |
− | + | The display will show:<br><code>Enter admin password</code><br><code>_</code> | |
− | + | # Press key pad for digits [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]], which is the factory default password. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | The display will show: | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | Enter admin password | ||
− | _ | ||
− | |||
− | Press key | ||
5) Display will show | 5) Display will show | ||
Line 58: | Line 45: | ||
7) After successful restart of the application, it is recommended to perform a Restore of factory settings in the Web Admin, the reset PW is 124816. | 7) After successful restart of the application, it is recommended to perform a Restore of factory settings in the Web Admin, the reset PW is 124816. | ||
+ | |||
+ | This has to be removed here later: {{File-DL|Quick Guide Migrating CorNet-IP to SIP|pdf}} |
Revision as of 15:47, 16 September 2006
This migration procedure is for upgrading an optiPoint 410/420 CorNet IP phone V5.1.2x to SIP V6.0.56 and later.
Contents
Connect the phone to LAN
Connect the optiPoint Cornet IP phone to the LAN (DHCP=on
is default). The assumption is that DHCP is available in your local area network.
The phone will reboot.
Depending on the version of the CorNet IP application installed
- either you may be prompted to enter the Fully qualified subscriber number, then follow Subscriber number prompted
- or you may not be prompted to enter the Fully qualified subscriber number, then follow Subscriber number is not prompted.
Subscriber number is prompted
- Enter some digits like ???
- Confirm
Save Changes
with the key. - The display will show:
Administration
01=Configuration?
- Press the key.
Continue with Enter Admin password.
Subscriber number is not prompted
If you have not been prompted for the subscriber number, the display will show:
-
Invalide GW Adress
orNo suscriber number
Enter Admin password
The display will show:Enter admin password
_
5) Display will show
Config: 01=Network?
Press confirmation key () and the right arrow key to select
02=Terminal IP addr.?
You may read the IP address and use this to switch over to the Web Admin pages by using a web browser (Microsoft IE recommended), typing http://Phone-IP-Address:8085, e.g. http://192.168.1.2:8085
6) Enter the Administration menu (PW 123456) and go to the “Upload/Download” section, choose “Download application”. Start a standard FTP Server (e.g. 3Com Daemon), and fill out the relevant FTP data, example pls. Refer to the screen shot below:
7) After successful restart of the application, it is recommended to perform a Restore of factory settings in the Web Admin, the reset PW is 124816.
This has to be removed here later: Quick Guide Migrating CorNet-IP to SIP