Difference between revisions of "optiPoint 410/420 CorNet IP (HFA) to SIP migration"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Line 4: | Line 4: | ||
{{File-DL|Quick Guide Migrating CorNet-IP to SIP|pdf}} | {{File-DL|Quick Guide Migrating CorNet-IP to SIP|pdf}} | ||
+ | |||
+ | Hier noch als Text...aber hier ist sicher einiges an Formattierung notwendig... | ||
+ | |||
+ | 1) Connect the optiPoint Cornet-IP phone to the LAN (DHCP=on is default) – the assumption is that DHCP is available in your local area network. | ||
+ | |||
+ | 2) The phone will boot and depending on the version of the CorNet-IP application installed, you may be prompted to enter the “Fully qualified subscriber number” – follow step 3A) | ||
+ | |||
+ | If you are not prompted – refer to step 3B) | ||
+ | |||
+ | 3 A) You may enter some digits like “123”, then confirm “Save Changes with the confirmation key () and the display will show: | ||
+ | |||
+ | Administration | ||
+ | 01=Configuration? | ||
+ | |||
+ | Press the confirmation key () | ||
+ | |||
+ | Continue with step (4) | ||
+ | |||
+ | 3 B) If you have not been prompted for the subscriber number, the display will show: | ||
+ | |||
+ | Administration | ||
+ | Invalide GW Adress / No suscriber number | ||
+ | |||
+ | Press the confirmation key () | ||
+ | |||
+ | The display will show: | ||
+ | |||
+ | Administration | ||
+ | 01=Configuration? | ||
+ | |||
+ | Press the confirmation key () once more | ||
+ | |||
+ | 4) Display will show | ||
+ | |||
+ | Enter admin password | ||
+ | _ | ||
+ | |||
+ | Press key pads for digits 123456 (this is the factory default PW). | ||
+ | |||
+ | 5) Display will show | ||
+ | |||
+ | Config: | ||
+ | 01=Network? | ||
+ | |||
+ | Press confirmation key () and the right arrow key to select | ||
+ | |||
+ | 02=Terminal IP addr.? | ||
+ | |||
+ | You may read the IP address and use this to switch over to the Web Admin pages by using a web browser (Microsoft IE recommended), typing http://Phone-IP-Address:8085, e.g. http://192.168.1.2:8085 | ||
+ | |||
+ | 6) Enter the Administration menu (PW 123456) and go to the “Upload/Download” section, choose “Download application”. | ||
+ | Start a standard FTP Server (e.g. 3Com Daemon), and fill out the relevant FTP data, example pls. Refer to the screen shot below: | ||
+ | |||
+ | 7) After successful restart of the application, it is recommended to perform a Restore of factory settings in the Web Admin, the reset PW is 124816. |
Revision as of 20:38, 15 September 2006
--Christian.kaehler 22:32, 15 September 2006 (CEST) Hier sollte wir ein aktuelles Dokument erzeugen, z.B. auf Basis CorNet-IP V5.1.2x und SIP V6.0.56 oder höher. Als Beispiel hänge ich ein PDF an, dass das Prinzip zeigen soll. Herr Reinelt, können Sie das übernehmen?
Quick Guide Migrating CorNet-IP to SIP
Hier noch als Text...aber hier ist sicher einiges an Formattierung notwendig...
1) Connect the optiPoint Cornet-IP phone to the LAN (DHCP=on is default) – the assumption is that DHCP is available in your local area network.
2) The phone will boot and depending on the version of the CorNet-IP application installed, you may be prompted to enter the “Fully qualified subscriber number” – follow step 3A)
If you are not prompted – refer to step 3B)
3 A) You may enter some digits like “123”, then confirm “Save Changes with the confirmation key () and the display will show:
Administration 01=Configuration?
Press the confirmation key ()
Continue with step (4)
3 B) If you have not been prompted for the subscriber number, the display will show:
Administration Invalide GW Adress / No suscriber number
Press the confirmation key ()
The display will show:
Administration 01=Configuration?
Press the confirmation key () once more
4) Display will show
Enter admin password _
Press key pads for digits 123456 (this is the factory default PW).
5) Display will show
Config: 01=Network?
Press confirmation key () and the right arrow key to select
02=Terminal IP addr.?
You may read the IP address and use this to switch over to the Web Admin pages by using a web browser (Microsoft IE recommended), typing http://Phone-IP-Address:8085, e.g. http://192.168.1.2:8085
6) Enter the Administration menu (PW 123456) and go to the “Upload/Download” section, choose “Download application”. Start a standard FTP Server (e.g. 3Com Daemon), and fill out the relevant FTP data, example pls. Refer to the screen shot below:
7) After successful restart of the application, it is recommended to perform a Restore of factory settings in the Web Admin, the reset PW is 124816.