Views

openSUSE 10.3 Installationshinweise

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 14:37, 13 November 2009 by Wmenn (talk | contribs) (Primergy TX150 S6)
Jump to: navigation, search

Template:InfoBox-HP3K-de

Um Probleme während der OpenScape Office Server Installation mit openSUSE 10.3 zu vermeiden, beachten Sie bitte die nachfolgenden Informationen und Hinweise.

Getestete Netzwerk Adapter mit openSUSE 10.3

Netzwerk Adapter D-Link DFE-528TX

  • Typ: DFE-528TX Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
  • Slot: 32 Bit PCI
  • Hinweis: automatische Erkennung

Netzwerk Adapter D-Link DGE-528T

  • Typ: DGE-528T Gigabit Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T, 1000 Base-T
  • Slot: PCI 2.2
  • Hinweis: automatische Erkennung

Netzwerk Adapter Netgear FA311 V2

  • Typ: Netgear FA311v2 Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
  • Slot: PCI
  • Hinweis: automatische Erkennung

Netzwerk Adapter Netgear GA311

  • Typ: Netgear GA311 Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
  • Slot: PCI 2.2
  • Hinweis: automatische Erkennung

Netzwerk Adapter Fujitsu Siemens Netlink

  • Typ: Fujitsu Siemens Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
  • Slot: PCI E
  • Hinweis: automatische Erkennung, S26361-F3067-L30

Getestete Server Hardware

Primergy TX150 S6

  • openSUSE Linux 10.3: OK.
  • Die Installation von OpenSUSE 10.3 am FS Primergy TX150 S6 ist möglich.
Es brauchen keine Parameter für ACPI oder AHCI geändert werden.
Um die LAN-Schnittstellen zu überprüfen wurde eine SSH-Verbindung zu einem anderen Server hergestellt. Dies funktioniert sowohl mit der OnBoard-Netzwerkkarte als auch mit einer externen Netzwerkkarte. Jedoch wurde die Installation ausschließlich mit der OpenSUSE-DVD durchgeführt und nicht mit dem (Windows-)Installationsprogramm, das mit dem Server mitgeliefert wurde. Das bereits verfügbare RAID-System (vorinstalliert bei einer früheren Installation) wurde von der OpenSUSE-Installation erkannt. An der Partitionierung wurden keine Änderungen vorgenommen.


Primergy TX 150 S6 problem with BIOS-RAID

OpenSUSE hangs on first boot after installation on Fujitsu Primergy TX 150 S6 with BIOS-RAID because the automatically assigned device names for partitions are changed after booting. A solution is described here:

Problem diagnosis

Fujitsu Primergy TX 150 S6 with BIOS-RAID openSUSE hangs on the first booting after installation

At an early stage of the installation (after the system analysis) the failure can already be detected by checking the partitioning manually.

Primergy TX 150 S6 RAID_1

If there are partition names with long hexadecimal numbers, the problem will occure, that these names will be changed at every startup. The mounting of the fstab partitions will fail, because of these changing partition names.

Solution

Change partitioning

Click on „Partitionierung“ and select „Vorschlag als Basis für eigene ...“.

Primergy TX 150 S6 RAID_2

Go on to the next page which shows a list of the partitions.

In general there should be following partitions: /boot optional swap max. 2GB / 10 to 20 GB /home rest of hard disk

Primergy TX 150 S6 RAID_3

The figure shows the creation of the /home partition. Change only the RAID partitions (/dev/mapper/...) Do not change /dev/sda* or /dev/sdb*


Edit size and mount point

When creating a partition with „Anlegen“ the size and the mount point can be adjusted. (see figure)

A similar dialog appears when editing a partition with „Bearbeiten“. Here only the mount point can be set.

Primergy TX 150 S6 RAID_4

The important action in both dialogs is to set the fstab options. (Only this will solve the problem).�This has to be done for all mentioned partitions on (b) „Change partitioning“.


Edit fstab options

Change the mount method to „Volume-Kennung“ and enter a volume name. You can freely choose a name, except:�it should not already exist.

Primergy TX 150 S6 RAID_5

This has to be repeated for the „/“, „/home“ and „swap“ partition and the „/boot“ partition if available.


Change boot loader configuration

If a swap partition shall be used, additionally the boot loader configuration has to be adapted.�Select „Systemstart“ ...

Primergy TX 150 S6 RAID_7

... and on the next dialog select „Konfigurationsdateien bearbeiten“ from the drop-down box via the button „Andere“.

Primergy TX 150 S6 RAID_8


Edit menu.lst

Choose the file „/boot/grub/menu.lst“ and edit the resume= parameter value (marked text). In this case it has to be substituted by „/dev/disk/by-label/VOL_6“, where „VOL_6“ is the label of the swap partition set under fstab options.

Primergy TX 150 S6 RAID_9

(Usually this can be copied from the root= parameter value, but the volume name has to be changed to the swap partition.)

Celsius W370

  • openSUSE Linux 10.3: Einschränkung, die OnBoard-Netzwerkkarte wurde nicht erkannt.


Dell Poweredge T105

  • AMD Opteron 2.1 GHz, 1 GB RAM, 250 GB Festplatte, DVD-Laufwerk
  • openSUSE Linux 10.3: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.


HP Proliant ML110 G5

  • Xenon dualcore 2.13 GHz, 1 GB RAM, 250 GB Festplatte, DVD-Laufwerk
  • openSUSE Linux 10.3: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.

Allgemeine Installationshinweise

  • openSUSE 10.3 muss im 32-Bit-Modus installiert werden (F7-Taste ist nur bei Dual DVD 32/64 verfügbar).
275px
  • Festplattenprobleme:
Moderne Server werden heutzutage häufig mit S-ATA Festplatten-Controllern ausgeliefert. Einige dieser Controller werden von openSUSE 10.3 nicht unterstützt. Bei Problemen mit der Festplattenerkennung muss der AHCI-Modus im Server-BIOS deaktiviert werden und der server neu gestartet werden. Nach dieser Änderung läuft der Server im P-ATA-kompatiblen Modus.
  • Netzwerkadapter Probleme:
Einen zertifizierten externen Netzwerkadapter verwenden (siehe o.g. Liste der getesteten Adapter).
  • Wenn generelle Probleme auftauchen:
Drücken Sie die folgenden Funktionstasten nach dem Starten der Installation von der openSUSE Installations-CD:
  • F3-Taste >> für Grafikkarte = Text-Modus
275px
  • F5-Taste >> für Kernel-Modus AHCI = aus
275px
  • Problem: Die openSuse CD startet immer vom CD-Laufwerk.
In diesem Beispiel ist die Festplattenlaufwerks-Einstellung im IDE-Modus. Die Einstellung muss im Server-BIOS von Native IDE auf AHCI (S-ATA) geändert werden und der Server muss neu gestartet werden.
275px
  • Problem mit Fujitsu TX 150 Server:
openSUSE 10.3 hängt sich während der Installation auf. Die folgende Einstellung muss geändert werden und openSUSE erneut installiert werden.
275px