Views

Free programmable Key (FPK) to send URL request to Server

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
Systematics
Family: OpenStage
Model: OpenStage 40
OpenStage 60
OpenStage 80
Relation: Phone related
Release: V2 R0

The basic requirement for the FPKs is that all keys (including those on any sidecar units attached) can be configured with a URL (termed send URL key). Pressing the key sends the URL to the server using an HTTP request. The key may be pressed at any time irrespective of registration and call state providing the phone is not locked. The key has an associated LED, whose state may be controlled through SIP signalling.

The send URL key is configured at the Admin level through the configuration server and WBM (provid-ing the key function has not been locked down). It is not changeable through local phone menus or OpenStage Manager. The phone user may only change the label associated with the key. They can not affect the configuration of the send URL key (either to configure or deconfigure them). The key function may be viewed via normal FPK editing. However, the URL and the associated data are not displayed.

A URL can only be assigned to non-shifted functions. It can not be assigned to the shifted functions. This ensures no conflicts between the different URLs and the single LED associated with the key.

Whilst the HTTP request is in progress, further key presses will be ignored. They will not send subsequent URL requests to the server. If the HTTP request fails, a popup will be displayed, informing the user of the error. The normal priority rules for popups will apply. All key presses, URL sent, and re-sponse will be logged.

The supported protocols are HTTP and HTTPS. With HTTPS, the phone will authenticate the server and the server may authenticate the phone. This ensures functions on the server are only executed after proper authentication of the phone. The DLS interface is required to deliver the new certificates to the phone.

If the LED is configured for SIP control and the phone is not registered, the HTTP request will still be sent but the state of the LED is not updated.

Configuration in Admin Menu

WBM menu for feature ’URL on FPK’

Key label: Label of the Key
Protocol: Protocol type. HTTP and HTTPS is supported
Web server address: IP-address or domain name of the server
Port: Portnumber of the addressed server port
Path: Path to application URI
Parameters: Parameters for the application server
Method: HTTP method used (GET or POST is supported)
Web server user ID: User name for authentication
Web server password: Password for authentication
LED controller URI: URI used from SIP server to control the LED

The parameters are mapped to the URL in the following way:

<method> <protocol>://<web server user ID>:<web server password>@<web server address>:<port>/<path>?<parameters>

Example

Key label: Example
Protocol: HTTP
Web server address: 139.21.164.230
Port: 443
Path: main.cmd
Parameters: page=WEBM_Admin_KeyModule1&lang=de&menu=000110000000000_99&user=Admin
Method: GET
Web server user ID: admin
Web server password: 123456
LED controller URI: URI used from SIP server to control the LED

Result:

GET https://admin:123456@139.21.164.230:443/main.cmd?page=WEBM_Admin_KeyModule1&lang=de&menu=000110000000000_99&user=Admin

Further Information