Views

Difference between revisions of "FAQ Configurator and Modelizer"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Releases:)
 
(138 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
This Wiki provides explainations and answers for ECS and Quicksales Modelizer related topics. As a sales engineer you might be interested in this subject.  
 
This Wiki provides explainations and answers for ECS and Quicksales Modelizer related topics. As a sales engineer you might be interested in this subject.  
  
== <br>''Global Information¶''  ==
+
== <br>'''Global Information'''''¶''  ==
  
 
=== Releases:  ===
 
=== Releases:  ===
  
Last delivery: Revision Package 31.1
+
*'''Last delivery:''' Delta  Package 42, 
 +
'''Relase Date:''' February 3, 2014
  
Relase Date: 6.6.2011
+
<br>
 +
 
 +
*'''EKB Version'''
 +
 
 +
<table width="30%">
 +
    <tr>
 +
<td>devices.ekb</td><td>Version 42001</td>
 +
    </tr>
 +
    <tr>
 +
<td>hip4000.ekb</td><td>Version 42006</td>
 +
    </tr>
 +
    <tr>
 +
<td>hip4000.sdb</td><td>Version 42006</td>
 +
    </tr>
 +
    <tr>
 +
<td>hip4000c.ekb</td><td>Version 42006</td>
 +
    </tr>
 +
    <tr>
 +
<td>hip4000c.sdb</td><td>Version 42006</td>
 +
    </tr>
 +
    <tr>
 +
<td>hp3kim9.ekb</td><td>Version 42000</td>
 +
    </tr>
 +
    <tr>
 +
<td>hpxpr.ekb</td><td>Version 42001</td>
 +
    </tr>
 +
    <tr>
 +
<td>lmo.ekb</td><td>Version 39100</td>
 +
    </tr>
 +
    <tr>
 +
<td>osbizv1.ekb</td><td>Version 42003</td>
 +
    </tr>
 +
    <tr>
 +
<td>osov3.ekb</td><td>Version 42000</td>
 +
    </tr>
 +
</table>
 +
 
 +
 
 +
*'''ECS Version'''  7.12o<br>
 +
 
 +
<br>
 +
 
 +
*'''Quicksales Modelizer'''
 +
 
 +
Modelizer Version CR 42006
 +
 
 +
<br>
 +
*'''SmartOffer'''
  
=== [https://app-enterprise.siemens-enterprise.com/gdmsproxy/retrieve?id=3265712118 Releasedocumentation]  ===
+
Rule Version V41.2
  
 +
===[https://app-enterprise.unify.com/gdmsproxy/retrieve?id=3265712118  Releasedocumentation]===
 
<br>
 
<br>
  
== <br>''Quicksales''  ==
+
<br>
  
Quicksale Modell Version 31005
+
== '''Known Issue'''  ==
 +
<br>
  
== ''Known Issue''  ==
+
== '''Workaround's'''  ==
  
'''ECS Fehlermeldung: No AMO UCSU......'''
+
* At the moment none necessarily
  
Möglicherweise wurde die falsche Teilregensteuerdateil verwendet. Korrekte
+
== <br><br>'''Schedule for Delta Packages'''==
Steuerdatei ist zu finden unter SIRA-Hompage
 
  
ECS Fehlermeldung: "Missing Shelf at KOORD......"
+
[https://app-enterprise.unify.com/gdmsproxy/retrieve?id=3273209136 Schedule 2014 for Delta Packages]
  
  Fehler in Teilregenstapel Bitte neuen Teilregen einspielen. SIRA-Hompage
+
<!--
 +
[https://app-enterprise.unify.com/gdmsproxy/retrieve?id=60589744 Schedule 2014 for Delta Packages]
 +
-->
  
'''ECS Fehlermeldung: Shelf ........... not distributed'''
+
<br>
  
  PHW für Aufbauvariante fehlt in den LM Bestandsdaten&nbsp;?
+
== '''Documentation'''¶  ==
  
'''ECS Fehlermeldung: "Set!Subsystem Failed............Fehlerursache''':
+
*'''Overview of products with configurator within the sales tools'''
 +
*'''&nbsp;'''[[Media:Overview_EKB_products_Sales_Tools_06.07.2011.pdf]]
  
Fehlerhafte IPDA Konfiguration vor Ort. Parameter Standoid ist falsch versorgt.
+
<br>
Der Parameter STANDOID dient zur Identifizierung des Standortes für den 
+
 
Konfigurator. Dieser Parameter
+
*'''User manual for the EKB configuration tool'''
darf vom Servicepersonal nicht verändert werden. Siehe auch im Servicehandbuch 
+
<!--
HiPath 4000 V5, Band 1 -  
+
*'''&nbsp;'''[[Media:Manual_HiPath_4000_en.pdf]]
AMO-Beschreibungen, Servicedokumentation, Ausgabe 4  Servicehandbuch
+
-->
&nbsp; ==
+
 
 +
<br>
  
== ''Workaround's''¶  ==
 
  
  aktuell keine
+
*'''HiPath4000 Expansion Orders'''
==
+
Expansion orders of HiPath4000 systems using the IBASE data.
 +
The tool support for HiPath4000 expansion orders is based on the "as-is" data of the customer system concerned, i.e., the actual hardware (and software) configuration at the time of the order.
 +
The necessary hardware information is obtained from the system in the form of a "partial REGEN" batch file, which contains AMO commands for "regenerating" the relevant system hardware configuration (line cards, shelves, locations, etc.). This data is stored in IBASE under the appropriate system number, in addition to the feature numbers (L-numbers) and quantities ordered in previous tool sessions. In the case of new orders, the information is provided by the original KONDA (CONDA) generating batch file, which reflects the "as-is" configuration status of the system only until the first partial REGEN file can be generated.
 +
The partial REGEN batch file is generated in the HiPath system concerned with the aid of a special Service procedure, and automatically stored in the IBASE inventory data. Please refer to the relevant Service page for details.
 +
A newer partial REGEN file obtained from a customer system and loaded in the tool for a system expansion order can also be transferred to IBASE using the "Configuration Service" function of the tool. See also below.
 +
&nbsp;
  
== ''Schedule for Delta Packages¶''  ==
+
<br>
  
[https://app-enterprise.siemens-enterprise.com/gdmsproxy/retrieve?id=3273209136 Schedule 2011]
+
*'''Partial REGEN'''
  
  [[]]
+
A "partial REGEN" is an AMO batch file that contains configuration data similar to the KONDA/CONDA (see below), but obtained as output from a HiPath system in response to a REGEN AMO call-up. The AMO commands reflect the "as-is" hardware configuration status of the system concerned, i.e., information on line cards, shelves, locations, etc. The name "partial REGEN" is derived from the fact that the file is required to contain only a limited subset of the total AMO information available in a HiPath system.
  
== Documentation¶  ==
+
example [[Media:Teilreg_Beispiel.pdf]]
  
  
  
*User manual for the EKB configuration tool
 
  
BHB HiPath4000
+
*'''KONDA/CONDA = Configuration Data'''
 +
The CONDA file (KONDA is the German acronym) contains an AMO command batch for generating the hardware and software configuration data in the HiPath system (e.g., boxes, shelf types, line cards, system software, etc.). The CONDA file is generated in the configuration tool when a system is first ordered, and also later as a result of each subsequent system expansion order. The information is stored in IBASE and can also be downloaded from DIAMOS by Service engineers. The CONDA file reflects the "as-sold" status of a system.
  
 +
example [[Media:KONDA-Beispiel.jpg]]
 
<br>
 
<br>
 +
<br>
 +
*'''How do I get CONDA access?'''
 +
IF you need the CONDA regularly, an SAP account can be requested.<br>
  
*Erweiterung HiPath4000
+
Please contact Mr. Schmidt, Rudolf; FIN IT GO 5;  rudolfschmidt@unify.com
  
Erweiterung von HiPath4000 Systemen unter Verwendung der IBASE Daten Die Erweiterung eines HiPath4000 System setzt auf den "ist Daten" des Kundensystems"
 
  
auf diese Daten werden über die Funktion Teilregen im Kundensystem abgefragt und in der <br>zentralen IBASE zusammen mit den "LM Daten" unter der Anlagennummer abgelegt. Bei der <br>Neukonfigurierung werden KONDA Daten statt Teilregendaten in der IBASE abgelegt, diese Daten <br>sellen die "ist Daten" dar, solange noch kein Teilregabzug zur Verfügung steht.Die "ist Daten" oder HW-Daten werden mittels einer Serviceprozedur erzeugt und automatisch in die IBASE geschrieben. Siehe hierzu die entsprechende Servic Seite
 
  
Weiter ist es möglich die von dem Kundesytem gewonnenen Teilregendaten Daten innerhalb der<br>Erweiterungskonfiguration im "Configuration-Service" in die IBASE hochzuladen. Siehe hierzu Punkt XY weiter&nbsp;&nbsp; unten.  
+
<br>
 +
 
 +
*'''KONDA/CONDA or partial REGEN'''
 +
The IBASE data of a HiPath 4000 system will always contain CONDA files ("as-sold" information) and, once this information has first been generated and stored, partial REGEN files ("as-is" information) . For the purposes of the configuration tool, the hardware information contained in the newest file is always definitive.
 +
<!--
 +
IBASE-Characteristics [[Media:IBASE-Characteristics.pdf]]
 +
-->
  
&nbsp;
 
  
 +
*'''What information is stored in the IBASE?'''
 +
For each HiPath system number stored, the IBASE data contains three (3) distinct data blocks with relevant inventory information.
 +
  -  Customer data
 +
  -  Feature data (ordered L-numbers and quantities)
 +
  -  Hardware configuration data, as defined in the CONDA ("as-sold" information) or partial REGEN ("as-is" information).
 
<br>
 
<br>
  
*Partial REGEN
+
After each expansion order, the IBASE content for the system concerned is updated and stored in full. The previous IBASE records remain unchanged and available in the archive. Archived data records can be restored (re-activated) at any time, if required.
 +
 
 +
 
 +
*'''Upload Partial REGEN to IBASE'''
 +
''For direct Sales''<br>
 +
 
 +
please see SIRA-Hompage 
  
&nbsp;&nbsp; Der Teilregen ist ein Datenabzug aus dem Kundensystem.
+
''For Partners''<br>
  
&nbsp;&nbsp; Die Daten werden mittels der "REGEN" Funktion aus dem System gewonnen.<br>&nbsp;&nbsp; Da nur ein kleiner Anteil der Gesamtdaten zur Konfiguration benötigt werden der Name Teilregen.<br>&nbsp;&nbsp; Die Daten beinhalten den aktuellen HW-Ausbau des Systems.  
+
Upload Partial REGEN via ConfigService
 +
<!--CS Manual [[Media:Config_Service_Manual.pdf]]
 +
-->
 +
IBASE Content Beispiel [[Media:IBASE-Inhalt-ext.pdf]]
  
example click here
+
<br>
  
*KONDA = Konfigurierungsdaten
+
<br>
  
&nbsp;&nbsp; Hierunter versteht man die Daten die den HW und SW Ausbauzustand der Kundenamnlege bescheiben.&nbsp;
+
== '''How To Documents'''¶  ==
  
&nbsp;&nbsp; Darauf setzen die Kundendaten auf. Die KONDA werden bei Neukonfiguration wie<br>&nbsp;&nbsp; auch bei Erweiterung vom Konfigurator erzeugt und im DIAMOS- System zur Abholung durch den Service&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; bereitgestellt.  
+
'''Send Order from Quicksales'''<br>
 +
<!--[[Media:User_Information_QuickSales_Order_Type.pdf]] -->
  
example click here
+
'''Handling of service features in Quicksales'''<br>[[Media:QS_user_information_regarding_service_features_for_HiPath_4000_systems.pdf]]
  
 +
<br>'''User Manual HiPath4000 Manager'''<br>
 +
<!--[[Media:User_Manual_HiPath_Manager_Upgrade.pdf]] -->
 +
&nbsp;
 +
 +
'''How to Resolve Inventory Data Problems in Hipath 4000 Systems'''<br>
 +
<!--[[Media:User Manual_HIP4000_Inventory_Data_Repair_EXT_V1.pdf]]-->
 
<br>
 
<br>
  
*KONDA oder Teilregen <br>In der IBASE können KONDA Daten oder Teilregendaten hinterlegt sein je nachdem welche Instanz zuletzt aktualisiert hat
+
'''Required Information when Opening a Trouble Ticket'''<br>
 +
<!--[[Media:Required_Info_for_QS-Trouble_Tickets.pdf]]-->
  
Prinziepdarstellung
+
== '''Salestool for IM'''  ==
  
*Was steht in der IBASE?
+
=== ''Quicksales''  ===
  
&nbsp;&nbsp; Die IBASE enthält 3 Datenblöcke je gespeichertes System.
+
'''Product Structure '''( QSBW&nbsp; Systeme)<br><br>
  
&nbsp;&nbsp; -&nbsp; Kundendaten
+
[[Media:QS--Systems-Structure--Delta-37-0-12108.pdf]]
  
&nbsp;&nbsp; -&nbsp; Leistungsmerkmaldaten
+
Products with EKB
  
&nbsp;&nbsp; -&nbsp; Hardwaredaten d.h. KONDA oder Teilregen.&nbsp;<br>&nbsp;&nbsp;Bei jeder Erweiterung werden die Daten als kompletter Datensatz abgespeichert.<br>&nbsp; Der Vorgängerdatensatz bleibt erhalten und wird als Historie abgelegt. Ein Datensatz<br>&nbsp; aus der Historie kann jederzeit wieder aktiviert werden.
+
HiPath 4000
  
Upload <br>IBASE Content <br>SIRA-Hompage <br>Upload Partial REGEN via ConfigService? <br>CS Manual
+
HiPath 4000 Manager V5
 +
 
 +
OpenScape Xpressions V6
  
<br>
 
  
<br>
 
  
== How To Documents¶  ==
+
''''Upload Partial REGEN via ConfigService'''
  
in Arbeit
+
<!--[[Media:Config_Service_Manual.pdf]]-->
  
== <br>Prozess¶  ==
+
== <br>'''Process''' ==
  
HiPath4000 Erweiterung
+
'''HiPath4000 Expansion'''
  
 +
Expansion Caracteristics<br>
 +
<!--[[Media:Erweiterungsprozess.pdf]]-->
 
<br>
 
<br>
  
Important Links<br>TI Online -- Technische Informationen <br>
+
== '''Important Links''' ==
 
+
<br>
SalesTools¶<br>QuickSales <br>
+
[https://enterprise-businessarea.unify.com/ti_ic/deutsch/index.html TI Online -- Technical Information Online]

Latest revision as of 15:05, 6 February 2014

Master Data Configurator and Modelizer

This Wiki provides explainations and answers for ECS and Quicksales Modelizer related topics. As a sales engineer you might be interested in this subject.


Global Information

Releases:

  • Last delivery: Delta Package 42,

Relase Date: February 3, 2014


  • EKB Version
devices.ekbVersion 42001
hip4000.ekbVersion 42006
hip4000.sdbVersion 42006
hip4000c.ekbVersion 42006
hip4000c.sdbVersion 42006
hp3kim9.ekbVersion 42000
hpxpr.ekbVersion 42001
lmo.ekbVersion 39100
osbizv1.ekbVersion 42003
osov3.ekbVersion 42000


  • ECS Version 7.12o


  • Quicksales Modelizer

Modelizer Version CR 42006


  • SmartOffer

Rule Version V41.2

Releasedocumentation



Known Issue


Workaround's

  • At the moment none necessarily



Schedule for Delta Packages

Schedule 2014 for Delta Packages



Documentation


  • User manual for the EKB configuration tool



  • HiPath4000 Expansion Orders

Expansion orders of HiPath4000 systems using the IBASE data. The tool support for HiPath4000 expansion orders is based on the "as-is" data of the customer system concerned, i.e., the actual hardware (and software) configuration at the time of the order. The necessary hardware information is obtained from the system in the form of a "partial REGEN" batch file, which contains AMO commands for "regenerating" the relevant system hardware configuration (line cards, shelves, locations, etc.). This data is stored in IBASE under the appropriate system number, in addition to the feature numbers (L-numbers) and quantities ordered in previous tool sessions. In the case of new orders, the information is provided by the original KONDA (CONDA) generating batch file, which reflects the "as-is" configuration status of the system only until the first partial REGEN file can be generated. The partial REGEN batch file is generated in the HiPath system concerned with the aid of a special Service procedure, and automatically stored in the IBASE inventory data. Please refer to the relevant Service page for details. A newer partial REGEN file obtained from a customer system and loaded in the tool for a system expansion order can also be transferred to IBASE using the "Configuration Service" function of the tool. See also below.  


  • Partial REGEN

A "partial REGEN" is an AMO batch file that contains configuration data similar to the KONDA/CONDA (see below), but obtained as output from a HiPath system in response to a REGEN AMO call-up. The AMO commands reflect the "as-is" hardware configuration status of the system concerned, i.e., information on line cards, shelves, locations, etc. The name "partial REGEN" is derived from the fact that the file is required to contain only a limited subset of the total AMO information available in a HiPath system.

example Media:Teilreg_Beispiel.pdf



  • KONDA/CONDA = Configuration Data

The CONDA file (KONDA is the German acronym) contains an AMO command batch for generating the hardware and software configuration data in the HiPath system (e.g., boxes, shelf types, line cards, system software, etc.). The CONDA file is generated in the configuration tool when a system is first ordered, and also later as a result of each subsequent system expansion order. The information is stored in IBASE and can also be downloaded from DIAMOS by Service engineers. The CONDA file reflects the "as-sold" status of a system.

example Media:KONDA-Beispiel.jpg

  • How do I get CONDA access?

IF you need the CONDA regularly, an SAP account can be requested.

Please contact Mr. Schmidt, Rudolf; FIN IT GO 5; rudolfschmidt@unify.com



  • KONDA/CONDA or partial REGEN

The IBASE data of a HiPath 4000 system will always contain CONDA files ("as-sold" information) and, once this information has first been generated and stored, partial REGEN files ("as-is" information) . For the purposes of the configuration tool, the hardware information contained in the newest file is always definitive.


  • What information is stored in the IBASE?

For each HiPath system number stored, the IBASE data contains three (3) distinct data blocks with relevant inventory information.

  -  Customer data 
  -  Feature data (ordered L-numbers and quantities) 
  -  Hardware configuration data, as defined in the CONDA ("as-sold" information) or partial REGEN ("as-is" information).


After each expansion order, the IBASE content for the system concerned is updated and stored in full. The previous IBASE records remain unchanged and available in the archive. Archived data records can be restored (re-activated) at any time, if required.


  • Upload Partial REGEN to IBASE

For direct Sales

please see SIRA-Hompage

For Partners

Upload Partial REGEN via ConfigService IBASE Content Beispiel Media:IBASE-Inhalt-ext.pdf



How To Documents

Send Order from Quicksales

Handling of service features in Quicksales
Media:QS_user_information_regarding_service_features_for_HiPath_4000_systems.pdf


User Manual HiPath4000 Manager
 

How to Resolve Inventory Data Problems in Hipath 4000 Systems

Required Information when Opening a Trouble Ticket

Salestool for IM

Quicksales

Product Structure ( QSBW  Systeme)

Media:QS--Systems-Structure--Delta-37-0-12108.pdf

Products with EKB

HiPath 4000

HiPath 4000 Manager V5

OpenScape Xpressions V6


'Upload Partial REGEN via ConfigService



Process

HiPath4000 Expansion

Expansion Caracteristics

Important Links


TI Online -- Technical Information Online