Circuit Meeting Room Release Notes
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Revision as of 14:18, 17 July 2018 by Christian.kaehler (talk | contribs) (→V1R3.4.x to be provided)
|
You are here: |
 Home Circuit Meeting Room Release Notes
|
|
You are here: |
Home Devices Circuit Meeting Room Circuit Meeting Room Release Notes
|
Software versioning / naming
The software naming scheme used to identify a software version for the Operating System / Platform looks like this:
V x[.y] R m.f.h
in which field:
- x[.y] denotes the Major release level
- m denotes the Minor release level
- f denotes the Fix release level
- h denotes the Hotfix level
During initial setup the SW version pre-installed on the device shall be checked against the currently available SW - devices shall be updated to the actual SW.
Contents
- 1 Software versioning / naming
- 2 Circuit Meeting Room V1 R3.4.1
- 3 Circuit Meeting Room V1 R3.4.0
- 4 Circuit Meeting Room V1 R3.3.0
- 5 Circuit Meeting Room V1 R2.2.0
- 6 Circuit Meeting Room V1 R1.0.1
- 7 Circuit Meeting Room V1 R1.0.0
- 8 Circuit Meeting Room V1 R0.4.1
- 9 Circuit Meeting Room V1 R0.3.1
- 10 Circuit Meeting Room V1 R0.3.0 (OBSOLETE - replaced by V1 R0.3.1)
- 11 Circuit Meeting Room V1 R0.1.0
- 12 Circuit Meeting Room V0 R0.73.0
Circuit Meeting Room V1 R3.4.1
This will be provided soon
Circuit Meeting Room V1 R3.4.0
This will be provided soon
Circuit Meeting Room V1 R3.3.0
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Operation / User | Application always started when device is configured with registration code | |
| Administration / Operation / User | Configurable notification for software update (See info on available Dashboard update on the idle screen) | |
| Administration / Operation / User | Energy Saving support (optional, configurable timer. Resume via USB keypad event, e.g. Fujitsu Comfort Sensor CS300) | |
| Administration / Operation | Layer 3 QoS support (same value for audio/video) | |
| Administration / Operation | Connected displays are shown on dashboard | |
| Administration / Operation | DHCP lease carried over after OS update (avoids unnessary changes in IP address) |
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Administration / User | Speakerphone removal detected properly (and set correctly when plugged in again. Supported in idle state only) | |
| Administration / User | Limit display resolution to full-HD 1920x1080p (when using 4K displays with internal upscaling check for 16:9 aspect ratio being supported by the device) |
Circuit Meeting Room V1 R2.2.0
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Operation / User | Supporting Mute sync and release button for additional products | |
| Operation / User | Supporting Chinese character on application | |
| Administration / Service | Simplified installation and update | |
| Administration / Service | Factory reset via local interface | |
| Administration / Service | Encryption for private key for installing Dashboard Certificate |
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | Wrong time when setting time between start of day and DST switch | |
| Administration / Service | System log files could get very huge | |
| Administration / Service | Certain speakerphones show up with wrong name on status page | |
| Administration / Service | Dashboard remote access let for a longer time idle - installation wizard: Unknown error | |
| Administration / Service | Unable to login with Firefox if time differs > 1 hour on CMR | |
| Administration / Service | Software - OS update field is accepting every input and displays wrong banner | |
| Administration / Service | Wrong local time when a timezone is selected |
Circuit Meeting Room V1 R1.0.1
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Operation / User | Support of Crestron Mercury |
Circuit Meeting Room V1 R1.0.0
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Operation / User | Detect audio and video accessory changes - supporting additional products not discovered before. No reboots required any more after configuration changes | |
| Operation / User | Detect network cable removal / plug-in - No reboots required any more after configuration changes | |
| Operation / User | Control mute/hang up via Jabra Speak 410 HW buttons - Circuit status (icons) and Jabra Speak 410 LED are synchronized. Release from conference via on-hook button | |
| Administration / Service | Check and display accessibility of update sources at Dashboard start |
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | Proxy mismatch Circuit connection after quick change | |
| Administration / Service | Some items on status page are not translated after reboot | |
| Administration / Service | Do not highlight SSH password field red on submit, if entered password was valid | |
| Administration / Service | It takes 1 - 2 min until proxy changes are reflected on status page | |
| tAdministration / Service | No audio output when Logitech "Brio" is connected to USB3 |
Circuit Meeting Room V1 R0.4.1
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | Circuit Proxy Bypass as a config option: For private cloud installations, Circuit traffic does not need to pass the proxy (only other traffic, e.g. updates, will use the proxy). |
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | NTP server with FQDN not working | |
| Administration / Service | Several NTP issues | |
| Administration / Service | HTTPS redirect broken | |
| Administration / Service | Circuit check not working if user added "https://" to Circuit URL | |
| Administration / Service | SSH password staying in password field | |
| OS / Platform | USB stick mount error | |
| OS / Platform | Wrong crontab permissions prevent logrotate from working | |
| OS / Platform | Security Improvements |
Circuit Meeting Room V1 R0.3.1
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | Incorrect port for SWS update | |
| OS/Platform | Memory issue in third party SW component | |
| OS/Platform | Log File cleanup failing |
Circuit Meeting Room V1 R0.3.0 (OBSOLETE - replaced by V1 R0.3.1)
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Administration / Service | Factory Reset | |
| Administration / Service | Support of Internet SWS | |
| Administration / Service | Dashboard update option removed - as part of OS update |
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| Issue with manual network configuration (default gateway) | ||
| Translation used for user messages in dashboard does not work immediately after language is changed | ||
| In some cases updating Chrome fails via the “Update Now” button and the “Automatic update” slider switch. | ||
| Issues with web app log files | ||
| Boot messages fixed | ||
| Screen arrangement with HDMI / DP combinations | ||
| Firefox stuck in safe mode | ||
| Switch DHCP gets stuck | ||
| Manual NTP lost in system upgrade | ||
| Proxy cannot be disabled | ||
| Chrome update fails via update now | ||
| Auto update settings lost in system upgrade | ||
| Manual time settings not working | ||
| Language setting is not reflected in remote/local browser | ||
| Circuit server url with http:// - no response | ||
| German translation - some items remain english after switching language to german | ||
| CMR Default route configuration problems | ||
| Sound error | ||
| Translation issues |
Circuit Meeting Room V1 R0.1.0
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Various smaller improvements |
Fixed Bugs
| ID | Cluster | Summary |
|---|
Circuit Meeting Room V0 R0.73.0
What's New?
| ID | Cluster | Summary |
|---|---|---|
| Initial SW release |
Fixed Bugs
| ID | Cluster | Summary |
|---|
