Your Assistance

Your Assistance is wanted! Do you have any comments, just write it down here.

Please don't forget your signature (~~~~) if you want to tell us something.

OpenStage questions

Dear Sir,

I have Openstage 40G SIP phone, Phone is getting hanged and on the webpage it is showing below error

ERROR

content/IC_5.png Attention

An internal error occurred!

Please execute the following steps:

Disconnect the phone from the network and where appropriate from the power supply.
Reconnect the phone

If this page still appears after the reboot of the phone, contact the relevant service personnel first. 
If the service personnel are unable to correct the problem, contact Customer Service.

ethod="getData" type="request">language]]> --> Set-Cookie: webm=0000|0000; path=/; 0

Windows 7 support

Hi, I would like to see posted your roadmap concerning future support of Windows 7 OS, given that some of your software don't support Windows Vista and you are stuck with XP (at least that's the case with my software for OpenStage 60T, OpenStage Manager and Callbridge Collection).

Best regards, --MikeKorinthos 10:03, 2 February 2010 (UTC)

Openstage 60T LAN integration

Hi, I'm using an OpenStage 60T with CTI in conjuction with a 3350 HiPath PBX. My computer runs Windows Vista Business. Although I have declared the IP of my server (192.168.1.6) in 'DNS Domain' section of the connection settings, I get 2 kinds of networks in Network & Sharing center. One that is correct, named 'neuron' with access 'local + internet' and one called 'unidentified network' with 'local only' access. Plus, my network performance is poor. Booting Microsoft Outlook and connecting to the Exchange server takes 5-7 minutes! It takes just seconds when the phone is not connected to the computer. Similarly run all other jobs that require network traffic. Please, can someone advise?

Best regards, MikeKorinthos--MikeKorinthos 11:04, 18 May 2009 (CEST)

I have to come back, since I got no assistance up to now. So, I ask again: How can I integrate OpenStage 60T in my domain network? I have already declared my server IP in 'DNS Domain' section in OpenStage Connection Service, and in the phone of course, but still, phone is not integrated in my domain and I get 2 separate networks, which cause delays. (by the way, 'DNS Domain' is not a valid term, it's the same thing, twice).

Thank you in advance, --MikeKorinthos 13:02, 28 May 2009 (CEST)

OpenStage 60 - XML applications

I would like to develop an XML application for OS60 that allows the user to dynamically select and view a sequence of pictures displayed on the phone full screen, as in the screen-saver. Is this feature (image displayed filling the full screen) currently supported by the OS60 XML applications?

Best regards, Alessandro

OpenStage 60T CTI question

Hi! I recently bought an Openstage 60T phone with a 3350 Hipath PBX. Although there is a USB master connection on the phone specifically for CTI applications, I cannot find the appropriate TAPI drivers for the phone. I do believe that current 120 TAPI don't support my phone (the CD that came with my PBX doesn't mention my phone in the supported phones). My reseller contacted the brunch in Greece, but did not get any help (not even if these drivers for my phone even exist). I mentioned somewhere that those drivers where due for spring 2008. Can someone, please, help me?

Best regards, MikeKorinthos

As far as I know the required driver is part of the OpenStage Manager installation package. --Horemu 12:06, 15 September 2008 (CEST)

Dear Horemu,

thanks for your attention, but I don't think so, because if you where right, and since I have already successfully installed OpenStage Manager, I should be able to dial from Microsoft Outlook, or at least see a line in Control Panel --> Phones & Modems Options --> Modems or Advanced. The modem section is empty and in the advanced section only the default entries of windows vista appear (Microsoft HID Phone TSP, NDIS proxy tapi service provider, Tapi kernel-mode service provider and Unimodem 5 service provider). When I try to call from Outlook I receive a message to install a modem or a telephone device.

MikeKorinthos, 21:32 15 September 2008

Hi, do you have already installed the RNDIS driver to use the OpenStage 60 T with your PC? The driver emulates an IP connection to a peripheral device which is connected by USB. So if you use the RNDIS driver and have the Callbridge IP SW installed it has to work. --Horemu 09:04, 16 September 2008 (CEST)

I installed OpenStage60TDM_USB_RNDIS_V1R1.1.0_Setup, (this is OpenStage Manager, installation file, isn't it?), but I don't have Callbridge IP software. Besides that, isn't Callbridge TU I should use?

MikeKorinthos, 11:50, 16 September 2008

Just to keep up with this thread, I installed the latest RNDIS driver and Callbridge IP but it doesn't work. Additionally, the configuration page of Callbridge IP don't mention my OpenStage phone in phones pull down menu and won't accept anything else but Optipoint 410 standard as a choice.

MikeKorinthos, 09:17, 18 September 2008

Hi,

I think Mike is on the good route: probaby we've to agree with him. Personally I'm not sure that 1st Party CTI connection is actually possible to an OpenStage 60/80 T via a USB (Slave) connection (only) using :the specific RNDIS driver (e.g. the latest RNDIS R1.3.0) without a TSP adapted to support the new OpenStage 60/80 T.

The RNDIS driver seems useful only to manage the OpenStage 60/80 T by using the OpenStage Manager (e.g. the latest R3.3.0) in fact we should use the (next Minor Release of) HiPath 120/170 V2 or the (new) :CallBridge IP (from the HiPath CallBridge Collection V2) TSP to connect the phone and perform TAPI commands but actually neither the HiPath TAPI 120/170 V2 nor the HiPath CallBridge Collection V2 are released :to support OpenStage phones. At least that is what I can argue just now. I shall be able to try the discussed scenario probably tomorrow morning at Lab. Is there any CTI expert out there involved :into the development of the 1st/3rd Party CTI features for the OpenStage 20/40/60/80 T series ?

A late night addition: a new OpenStage CallBridge TSP will be developed for 1st Party CTI (it should be available with the upcoming release of OpenStage V1 R3 CorNet IP).

Kimera 00:26, 19 September 2008 (CEST)

XML application for OpenStage 60

I would like to develop XML application for openstage 60. First of all my whish was to make my phones working with WebcamViewer (downloaded from the wiki page: http://wiki.unify.com/index.php/Example_XML_Applications_for_OpenStage) and with other pos software applications like weather and RSSFeed, but I had this problem:

1. I configured the phone to work with the test server "87.106.21.36" as stated in the wiki but it seems that the OS60 cannot performs any request (from wireshark trace). Firmware is V1 R3.7.0 SIP 080215 (tested both Weather and WebcamViewer and the others RSSFeed etc.).

Could someone please give me some help? Thanks Alessandro

I just tested it using the same firmware. Please confer the screenshot:

Can you upload a screenshot of your configuration?

However, no request at all seems weird. Do the other functions of the phone work? Is a proxy required in you network? --harald 10:42, 1 September 2008 (CEST)

I am using the same configuration. When I try to start the WebcamViewer application the phone shows the following message: "Starting XML Application" but I have no traffic from the phone. The other basic functionalities (SIP calls) work fine. I have performed my test with two different Openstage 60 (same firmware), obtaining the same result. No proxy is required in my network. Do I need some further configurations to enable the XML applications on the phones?

Thanks, Alessandro

There is no further configuration necessary, AFAIK. Could you try a factory reset?

Good luck, Harald --harald 12:42, 2 September 2008 (CEST)

Hello Sir, I am Working on XML applications. try to Run Webcam Viewer on my local Apache server. But I am unable to get WebCam Capture Servlet. Can you please Help me. In the installation guide there are 3 links in file to test servlets. (http://localhost:8080/WebcamViewer/WebcamViewer?phonenumber=123&ipaddress=567) Working Fine as in installation Guide.

(http://localhost:8080/WebCam/WebCam?height=80&width=80) Problem on this page. Webcam Capture servlet is not building. There is no WebCam Folder in Tomcat Appache Webapps folder. Error ( The internet site reports that the item you requested could not be found. (HTTP/1.0 404). I think the problem is with JMF ?

(http://localhost:8080/WebcamWebportal/WebcamWebportal) Working Fine as in installation Guide.

Please Help me thanks

Ahmad

Retrieved from "http://wiki.siemens-enterprise.com/index.php/User_talk:Ahmadml"

Newer Firmware version for OpenStage

Hi,

I bought from my reseller in Italy two openstage 20 and an openstage 40, shipped with firmware V1 R2.2.63 SIP 070629 and V0 R7.8.135 SIP 070312. I would like to upgrade the firmware: I followed the indication provided here but, neither my distributor nor Unify here in Italy are able to provide me with the the newer version. Could you please give an answer?

Best regards Alessandro

Hi Alessandro, your distributor or your local branch contact must have access to the Unify SWS (Software Server). The server provides the required software for free. For Italy the available software versions are:

Openstage 20 SIP: V1 R3.7.0, V30152-P1299-A100-33

Openstage 40 SIP: V1 R3.7.0, V30152-P1299-A200-33

--Horemu 14:51, 3 April 2008 (CEST)

Configuring file transfers using HTTPS on OpenStage phones

FYI...

Configuring file transfers using HTTPS (i.e. phone app, hold music, ringer, picture clip, LDAP, logo, screensaver, and HPT dongle) through local admin on OpenStage phones, the following fields must be filled in as shown.... (The values shown are example values)

Download method = HTTPS

FTP Server address = 172.23.4.174

FTP server port = 443

HTTPS base URL = https://172.23.4.174:443/ipp/

Filename = 2006_02.jpg

with all other fields left blank.

Thanks,

John

Hipath HT120_2.0.65.0000 Tapi-Driver and Office 2010 32bit on W7/64bit

We got the new Tapi above installed last week, to connect our Hipath 3000 / Openstage 40 and 60 phones to the PCs. On all computers Windows 7 (64bit) and Office 2010 (32bit) is installed. Office 32bit is necessary because of the software we use and to use TapiCall properly.

Unfortunately it seems that the HT120 Tapi causes MS Office to reconfigure each time, it its started. I read somewhere that it has to do something with the access database engine.

On the smaller Openstage 40 workplaces we did a workaround by using the USB-Tapi wich works fine with office. On the Openstage 60 workplaces we did not manage to get the USB-Tapi working properly. Are there any hints?

Please feel free to contact me by mail or phone (=> http://www.brennerplan.de).

Best regards Tortsen

No download link?

On http://wiki.unify.com/wiki/HiPath_TAPI_120/170 i can see "Now released for 64-bit Windows operating systems !", but I can't find anywhere the Downloads section. :/ Thanks a lot. (Josep Mir (talk) 11:02, 7 January 2014 (CET))

optiPoint & Gigaset questions

OptiPoint 420 paging/intercom

Hi all, I'm using the OptiPoint terminals to enforce a paging services. For this service I have to change the SIP header Call-Info and set the parameter answer-after. The service work well but I'm looking for a auomatic procedure to adjust the volume of loudspeaker when there is an incoming paging call. Can I use some option in a SIP message (like the answer-after parameter) to control the volume?

Thanks and regards Tommaso

Como le asigno la direccion Ip al telefono la primera vez que voy a usarlo. por mas que le doy menu, no pasa nada y en la pantalla aparece el mensaje "gateway not found". saludos. Adolfo. Lagrutta

New Firmware for optiPoint ML2

Hi. i have bought a optipoint wl2 by ebay. I would like to upgrade the firmware but I cannot find them. Where can I download a new Firmware? I thought the firmware stand under gpl. Best regard André

You can get a software update only by a certified SEN partner. If your deal was a privat bargain, try to connect your seller. Maybe he has contact to an authorized partner. Amongst others the software consists of gpl parts. This parts are mentioned in the enclosed manual. --Horemu 12:13, 8 April 2008 (CEST)

Booting an optipoint 420 advance

Please

I'm using optipoint 420 advance but when i connect them on the LAN or on power the phone is not booted it displayed the following message : "Optipoint420Adv 5.1.30 Initialising" Could you help me pls ?

Gigaset Professional M2 systemtime on an analogue line

Hello,

I got the following problem: I got two handsets of the Gigaset Professional M2 which I do like and I got two analogue lines which I use. Because I got analogue gigaset-stations I can not rely on system-time. Is there the possibility to have a station that connects to analogue lines and gives me a stable system time aswell? What would be the cheapest solution for that? Can I connect Hi-Path systems to analogue lines (I think I can't). Please let me know.

Kind regards,

Sophia

== Platform specific questions

Transfer mp3 file to HiPath 3550

i am using Hipath 3550 and i wants to record our welcom message on the system. we have a recorded mp3 file. how it possibel to transfer mp3 file into the hipath sytem --Manoj 13:27, 4 August 2008 (CEST)

Maximum Power on HiPath OpenOffice ME

The technical specification says the system needs about 250W. This is the maximum power of the internal power supply. The system needs typically 60W.

Regards K. Leuschner

Technical Support Forums for HiPath 4000

Hi,

Does anyone know of a technical forum for HiPath 4000 where technical experts can give advise?

Flame

Comments to files provided in this Wiki

You can use a template for your comments.

File name	Admin Manual HiPath Deployment Service Tool info
Comment	Please remove the file and replace it by a link to DLS (Online documentation is now provided there)
Signature	--Stefan Beck
Status	Fixed

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	section 3.3.2.6 gw-default results in "Item="gw-default", status="not supported"
Signature	--Christian.kaehler 21:42, 11 February 2007 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	There is no explanation given for the error log - it is almost self explaining, but there should be an indication that this debug feature is available, especially in case you provide config files manually created
Signature	--Christian.kaehler 13:23, 11 February 2007 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	Section 3.2.2.1: The tag for the static IP address is not <Item name="ipadddr">, but "ipaddress"
Signature	Christian.kaehler 13:07, 11 February 2007 (CET)--Christian.kaehler 20:57, 5 November 2006 (CET)
Status	Fixed

File name	User_Manual_optiPoint_410-420_advance_S.pdf info
Comment	Section Appendix/User menu: The factory defaults are partly incorrect, e.g.39=DSM call view, 47=Call Park pickup?, 50=Callback-busy? and missing for 55=Call Recording
Signature	--Christian.kaehler 11:14, 5 February 2007 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	Section 3.3.6.6: The tag for the application file name is not <Item name="ftp-app-file">, but "dl-ftp-firmware-filename"
Signature	--Christian.kaehler 20:57, 5 November 2006 (CET)
Status	Fixed

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	All across the manual, the Item-parameter is escaped wrongly. Instead of "Index="6", it should read Index="6".
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	All across the manual, the parameter is written with a capital I. Instead of Index=, it should read index=. (Item will get discarded by V7 R6.10.0)
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	Config-item hot-keypad-dialing is not set by 0/1 but instead with true/false
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter rsip-registrar-port is non-existant. It should be registrar-port
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter sip-server-port is non-existant. It should be reg-port
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter sip-gateway-port is non-existant. It should be sgnl-gateway-port
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter Host name is non-existant. It should be hostname
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter regttl is non-existant. It should be reg-ttl
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	The parameter sip-port is non-existant. I couldn't find a working replacement - please fix.
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

File name	Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment	There is no documentent parameter to set the Locked by administrator-flag for function keys.
Signature	--Martin Gross (talk) 14:27, 9 December 2013 (CET)
Status	Open

Suggestions

Section for the Wireless

Is it possible to add a section for the Wireless?

It would be very useful to have the AP30 and AP40 initially - then add on the Access Controllers and access points too.

Also how about a section on PRE-Hardware like ROLM equipment (CBX7000-9000 and 9751 thru 9005 series and later SiemensROLM USA equipment (HCM300/9751-9006i and HCM200/9200CBX). Can help on that. :)

Would it be possible to include part numbers in your descriptions?

Feature Requests

I have some requests that I would like to see in the OpenScape Office Phone system/MyPortal/MyAttendant

Phone System: - I would like a synchronization option in the external phonebook of MyPortal and the external phonebook in the phone system. - I would like a more extended SNMP option in the OpenStage phones (we have the 15 and 40 series), so that our inventory software can see the correct device name, and assigned phone number. - I would like a more extended DLS option in the MX system. So that settings like SNMP string and password could be centrally changed without having to login to each single phone.

Gigaset S4 DECT system: - I would like to be able to access the MX/MyPortal phonebook from a Gigaset S4.

MyPortal: - I would like the option to be able to hide users from the internal Phonebook, such as Fax users, for example.

MyAttendant: - I would like the option to be able to export the layout of the MyAttendant buttons, so that this can be imported with other users. (so that each receptionist can have the same layout). - I would like the ability to be able to move call buttons. Now the only way is to sort the users.

Regards, Jeroen de Vroede

Views