Views

optiPoint 410/420 S factory reset

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 06:23, 4 September 2006 by Horemu (talk | contribs) (→‎By local phone procedure)
Jump to: navigation, search

The reset to factory defaults at optiPoint 410/420 S phones can be done in different ways. To factory reset optiPoint 410/420 phones (CorNet IP) see Factory reset optiPoint 410/420 phones.

optiPoint 410/420 S (with display)

By Web-based management

(TBD)

By local phone procedure

Ensure that call control is on the phone, not the DSM ???.

  • Disconnect phone from LAN (except PoE).
  • Lift handset.
  • Type in reset code opk-minus.png opk-plus.png opk-ast.png opk-3.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png.
  • Replace handset.
  • Connect phone to LAN (except PoE).

optiPoint 410/420 entry S

By Web-based management

(TBD)

By local phone procedure

  • Disconnect phone from LAN (except PoE).
  • Press keys simultaneously opk-3.png opk-8.png opk-9.png.
  • Press the key opk-ast.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png.
  • Press the key opk-rau.png.
  • Connect phone to LAN (except PoE).
Retrieved from "http://wiki.unify.com/index.php?title=optiPoint_410/420_S_factory_reset&oldid=3458"