optiPoint 410/420 S factory reset

◄ How To

The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.

optiPoint 410/420 S display phones

By Web-based management

Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW 124816.

Select the item "Reset factory setting"

Note: Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.

---

By local phone procedure

Ensure that call control is on the phone, not the DSM ???.

• Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
• Lift handset.
• Type in reset code .
• Type in reset password and press the Confirm button .
• Replace handset.

• If required, re-connect phone to LAN.

optiPoint 410 entry S

By Web-based management

(TBD)

By local phone procedure

• Disconnect phone from LAN (except PoE).
• Press keys simultaneously .
• Press the key .
• Type in reset password .
• Press the key .
• Connect phone to LAN (except PoE).