Difference between revisions of "OpenScape Desk Phone CP700X Easy Deployment"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Hans.zeiner (talk | contribs) (Created page with "= Easy Deployment in Detail = This is a short introduction to the OpenScape Desk Phone CP700X Easy deployment feature The easy deployment process consists of three phases:...") |
Hans.zeiner (talk | contribs) (→1) WLAN discovery) |
||
| Line 23: | Line 23: | ||
If the phone has not successfully connected to this WLAN within ten seconds, it will continue to try to connect for ten seconds again until one succeeds. | If the phone has not successfully connected to this WLAN within ten seconds, it will continue to try to connect for ten seconds again until one succeeds. | ||
| − | This process can also be interrupted by configuring the phone either through the local admin menu (see | + | This process can also be interrupted by configuring the phone either through the local admin menu (see 4) or through the Deployment server (see 3). |
As soon as one of the Networks A-D has a SSID filled in, probing of AWS-INIT will stop. | As soon as one of the Networks A-D has a SSID filled in, probing of AWS-INIT will stop. | ||
| + | |||
| + | == 2) Deployment Service == | ||
| + | |||
| + | Deployment_Service | ||
Revision as of 15:55, 3 February 2021
Easy Deployment in Detail
This is a short introduction to the OpenScape Desk Phone CP700X Easy deployment feature
The easy deployment process consists of three phases:
- WLAN discovery (optional)
- Deployment service discovery
- Manual Configuration
1) WLAN discovery
The WLAN discovery process is initiated when a phone starts up and does not have any WLAN systems configured. In this case, it will try to connect to a predefined WLAN with the following configuration:
- SSID: AWS-INIT
- Security key: WPA-PSK / WPA2-PSK
- WPA-PSK passphrase: AWS-INIT
All other network parameters are at their default settings, which mean:
- DHCP mode: On
- 802.11 protocol: 802.11b/g/n
- 802.11b/g/n channels: 1,6,11
- World mode regulatory domain: World mode (802.11d)
If the phone has not successfully connected to this WLAN within ten seconds, it will continue to try to connect for ten seconds again until one succeeds.
This process can also be interrupted by configuring the phone either through the local admin menu (see 4) or through the Deployment server (see 3). As soon as one of the Networks A-D has a SSID filled in, probing of AWS-INIT will stop.
2) Deployment Service
Deployment_Service
