Difference between revisions of "optiPoint"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
| Line 1: | Line 1: | ||
| − | [[Image:op420adv-p.jpg| | + | [[Image:op420adv-p.jpg|250px|thumb|[[optiPoint 420 advance S]], one of devices of the optiPoint phone family]] |
Below you find an overview of the Siemens '''optiPoint''' phones, subdivided in [[SIP]], [[HFA]] and [[TDM]] phones. | Below you find an overview of the Siemens '''optiPoint''' phones, subdivided in [[SIP]], [[HFA]] and [[TDM]] phones. | ||
Revision as of 13:41, 8 February 2008
optiPoint 420 advance S, one of devices of the optiPoint phone family
Below you find an overview of the Siemens optiPoint phones, subdivided in SIP, HFA and TDM phones.
SIP phones
| Phone or Phone Family | Description |
|---|---|
| optiPoint 410/420 S | The nine models of this family are connected to a SIP server via LAN interface. The hardware is similar to the members of the optiPoint 410/420 family, but the phones have a SIP firmware loaded. |
| optiPoint WL2 professional S | The wireless phone is connected to a SIP server via WLAN access point. The hardware is similar to the optiPoint WL2 professional, but the phone has a SIP firmware loaded. |
| optiPoint 150 S | The cost-effective entry model is connected to a SIP server via LAN interface. |
CorNet IP (HFA) phones
| Phone or Phone Family | Description |
|---|---|
| optiPoint 410/420 | The nine models of this family are connected to the HiPath via LAN interface. The hardware is similar to the members of the optiPoint 410/420 S family, but the phones have a CorNet IP firmware loaded. |
| optiPoint WL2 professional | The wireless phone is connected to the HiPath via WLAN access point. The hardware is similar to the optiPoint WL2 professional S, but the phone has a CorNet IP firmware loaded. |
TDM phones
| Phone or Phone Family | Description |
|---|---|
| optiPoint 500 | The four models of this family looks similar to optiPoint 410 phones, but they are connected to the HiPath by UP0/E interface. |
