Difference between revisions of "optiPoint application module How to configure WAP"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Teamone.dtp (talk | contribs) (→Configuration via Web browser) |
Teamone.dtp (talk | contribs) (→Configuration via Web browser) |
||
Line 96: | Line 96: | ||
# Open a Web browser and enter the IP address of the optiPoint telephone whose LDAP template is to be installed on the optiPoint application module: | # Open a Web browser and enter the IP address of the optiPoint telephone whose LDAP template is to be installed on the optiPoint application module: | ||
− | #: http://'''http://[IP address]:8085''' | + | #: http://'''http://[IP address]:8085'''/ |
#: The telephone homepage is displayed. | #: The telephone homepage is displayed. | ||
# Click '''Administration'''. | # Click '''Administration'''. |
Revision as of 12:34, 12 September 2006
Contents
Overview
This document contains practical information on how to configure the WAP browser on the optiPoint application module (via the "Browser" application).
Scope of document
This document describes how to configure and use WAP on your optiPoint application module.
The following topics are not dealt with in this document:
- How to use WAP content in the WAP browser on the optiPoint application module.
- How to create WAP pages and how to host the content on a server.
- How to configure further applications on the optiPoint application module.
For further information on these topics, refer to the relevant documents listed in “<postfield>”section 5, “References”.
The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products.
The trademarks used are the property of Siemens AG or their respective owners.
Infrastructure of WAP applications
Infrastructure of WAP applications
The following are some examples of WAP content that is available on the Internet for use on the optiPoint application module.
- Newsticker, e. g.: http://wap.n-tv.de/
- Public telephone directories with direct dialing
- Exchange rate and stock market reports
- Travel service, e. g.: http://wap.lufthansa.de/
- Weather forecasts (local, worldwide, etc.)
- Shopping portals, e. g.: http://wap.ebay.com/
Other services such as weather forecasts, route planners, e-mail, chat and SMS services For an extensive list of current links to WAP content on the Internet refer to section 5, "References".
Requirements
To use WAP the following requirements must be met:
- The optiPoint application module is connected to one of the following optiPoint telephones and operational:
- optiPoint 410 standard (HFA)
- optiPoint 410 advance (HFA)
- optiPoint 420 standard (HFA)
- optiPoint 420 advance (HFA)
- You can also run the optiPoint application module on optiPoint 500 telephones, but these do not support the Java function.
- To optimize browser-based administration:
- You should know the IP address of the optiPoint telephone with the optiPoint application module module you wish to configure.
- You should have a PC with a Web browser that can access your optiPoint telephone via LAN.
- You can also connect a PC (e.g. laptop) directly to one of the telephones listed above using a LAN cable (socket on the underside of the telephone).File:bw nw2.png20px
See section 5, “References” to find out where you can obtain additional information on the different topics.
Configuration overview
The following table compares administration via a Web browser (WEB) with administration on the optiPoint application module (APM). At a glance, you can see which configuration options are available for each task.
Configuration task | WEB | APM |
---|---|---|
Change WAP gateway address | section 2.1 | - |
Change WAP gateway connection type | section 2.1 | - |
Change WAP gateway user name | section 2.1 | section 2.2 |
Change WAP gateway password | section 2.1 | section 2.2 |
Change WAP homepage | section 3.1 | section 3.2 |
Add WAP favorites | section 4.1.1 | section 4.2.1 |
Change WAP favorites | section 4.1.2 | section 4.2.2 |
Delete WAP favorites | section 4.1.3 | section 4.2.3 |
There are also other methods for administering the optiPoint application module such as the Deployment Tool or the Deployment Service. For further information, please refer to section 5, “References”.
Configuring WAP Access
The following description describes how to configure data for communicating with the WAP gateway.
Note the requirements listed in section 1.3, “Requirements”.
Configuration via Web browser
- Open a Web browser and enter the IP address of the optiPoint telephone whose LDAP template is to be installed on the optiPoint application module:
- http://http://[IP address]:8085/
- The telephone homepage is displayed.
- Click Administration.
- You are prompted to enter the administration password.
- Enter the password (default: 123456) and confirm your entry with Login.
- The administration menu is displayed.
- In the menu click WAP under Applications.
- An input form is displayed.
- Enter the following parameters in the form:
- Gateway address: IP address of the WAP gateway.
- Connection type: protocol for connection with the WAP gateway.
- Username: user name for accessing the WAP gateway.
- Only enter a password in both password fields if the password has changed. The password is not displayed when entered in these fields.
- Click Submit.
All of the data required for communicating with the WAP gateway is now incorporated into the telephone.