Difference between revisions of "optiPoint 410/420 S FAQ"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (→SIP Port settings) |
m (→SIP Port settings) |
||
| Line 19: | Line 19: | ||
If you provide port numbers in the fields adjacend to the address fiels, then... | If you provide port numbers in the fields adjacend to the address fiels, then... | ||
| − | * ...these values will specify the port | + | * ...these values will specify the '''destination''' port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or... |
| − | * ... | + | * ...the values are set equal to zero, then the '''default''' SIP port numbers will be used - or if DNS-SRV is used, the port numbers provided in DNS-SRV responses will apply. |
| − | * ...you | + | * ...you may specify different SIP ports for registrar and server. |
The field "SIP port" below denotes the '''sending''' port used on the phone side. | The field "SIP port" below denotes the '''sending''' port used on the phone side. | ||
Revision as of 10:24, 20 October 2006
TheoptiPoint 410/420 S FAQ provides answers to frequently asked question about the optiPoint SIP phone family optiPoint 410/420 S, structured into different topics.
General
The following comment should be fixed
| Show fixme list
Translation from German is in progress
Operating the optiPoint telephones
SIP Port settings
- In the administration section (local menue: 02=System / 07=SIP addresses or web admin: SIP environment / SIP addresses) I see two fields to provide SIP ports. How does the port setting work?
File:OptiPoint 410420 S V4 1 SIP Port Settings.jpg
This is showing the SIP port settings
If you provide port numbers in the fields adjacend to the address fiels, then...
- ...these values will specify the destination port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or...
- ...the values are set equal to zero, then the default SIP port numbers will be used - or if DNS-SRV is used, the port numbers provided in DNS-SRV responses will apply.
- ...you may specify different SIP ports for registrar and server.
The field "SIP port" below denotes the sending port used on the phone side.
