Views

optiPoint 150 S Release Notes

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 08:55, 28 September 2006 by Mg5151 (talk | contribs)
Jump to: navigation, search

The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S (Deutschland optiPoint 150 S).

V1.29

What’s New?

  • Be able to disable *99 at Sylantro

Fixed Bugs

  • Wrong display message at Op150 after call transfer
  • No Fallback to Inband DTMF if RFC2833 configured but one partner does not support DTMF after RFC2833
  • Number not dialed when going Off Hook
  • Phone plays DTMF digits if called while dialing.
  • Providertest Web.de: No Registration with DNS Name for SIP Server


V1.28

What’s New?

Internal ID Cluster New feature Comment
N/A Sylantro Special call park feature for Sylantro V4.0 Fixed
N/A Sylantro Special call pick-up feature for Sylantro V4.0 Fixed
N/A Sylantro Distinctive ringing for Sylantro V4.0 Fixed

Fixed Bugs and new features since Version 1.22

  • Broadsoft: DHCP Trouble - phone couldn't obtain IP adress via DHCP shortly
  • Broadsoft: Should not perform SRV lookup if service domain IPv4 format
  • Broadsoft: Failover/failback mechanism
  • IP: New default QoS L3 values (Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46))
  • HP3k: No Ringback tone when calling Upoe or HFA phone @ HP3k (complies now to RFC 3960 sect 3.2)
  • Admin: Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)Now neither WBM nor local admin can configure CF in this case
  • IP: Phone is sending out ARP requests for IP: 192.1.1.49 But this IP is NOWHERE configured in the phone.
  • General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
  • Support of DNS query SRV (DNS_SRV)
  • Support DNS TTL
  • Support RFC 3264 Hold for Broadsoft
  • General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
  • General: Loud tone when call disconnected
  • General: Calltransfer not possible after toggle between calls
  • LAN: phone doesn’t register, if L2 QoS value is set
  • LAN: VLAN ID can’t be reset to None
  • HiPath 3000: Toggle between calls not possible
  • HiPath 3000: Busy tone after attended Call transfer
  • HiPath 3000: HP3k-HP3k trunking, no payload after transfer
  • Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
  • Telnet port disabled
  • Distinctive Ringing (Sylantro) supported


Known & Open Issues

  • HiPath 3000: Blind (semi-attended) transfer doesn’t work
  • Not possible to dial, after first call was made with Hook on
  • Symmetric use of UDP ports (planned for V1.25)

V1.22

Internal ID Cluster New feature Comment
323 VLAN ID can't be configured via Phone Fixed
356 Blind transfer does not work oh H8000 Fixed
358 After factory reset it is still possible to log in as user defined in last saved configuration Fixed
361 Admin password is not reset after factory reset Fixed
380 Disable Telnet Access at the optiPoint 150 Fixed