optiPoint 150 S Release Notes
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S (
optiPoint 150 S).
Contents
V1.26
What’s New?
- IP: New L3-QoS default parameters: Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
Fixed Bugs
- HiPath 3000: No Ringback tone when calling Upoe or HFA phone
- Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k)
- IP: Phone send ARP requests to IP: 192.1.1.49
| Internal ID | Cluster | Problem | Comment |
|---|---|---|---|
| 400 | HP3k | No Ringback tone when calling Upoe or HFA phone @ HP3k | complies now to RFC 3960 sect 3.2 |
| 392 | Admin | Possible to configure Call forwarding at the phone when connected to HP3k, HP4k) | Now neither WBM nor local admin can configure CF in this case (correct!) |
| V1.24 | 07/21/2006 | Release Note for V1.24 |  oP150S_v124
|
| V1.23 | 07/14/2006 | Release Note for V1.23 | oP150S_v123
|
| V1.22 | 05/10/2006 | - | oP150S_v122
|
V1.25
Fixed Bugs
- General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
V1.24
What’s New?
- Support of DNS query SRV (DNS_SRV)
- Support DNS TTL
- Support RFC 3264 Hold for Broadsoft
Fixed Bugs
- General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
- General: Loud tone when call disconnected
- General: Calltransfer not possible after toggle between calls
- LAN: phone doesn’t register, if L2 QoS value is set
- LAN: VLAN ID can’t be reset to None
- HiPath 3000: Toggle between calls not possible
- HiPath 3000: Busy tone after attended Call transfer
- HiPath 3000: HP3k-HP3k trunking, no payload after transfer
- Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
Known & Open Issues
- HiPath 3000: Blind (semi-attended) transfer doesn’t work
- Not possible to dial, after first call was made with Hook on
- Symmetric use of UDP ports (planned for V1.25)
V1.23
What’s New?
- Telnet port disabled
- Distinctive Ringing (Sylantro) supported
