Difference between revisions of "optiPoint 150 S Release Notes"

Revision as of 14:27, 28 August 2006

The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S ( optiPoint 150 S).

V1.26

What’s New?

• IP: New L3-QoS default parameters: Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)

Fixed Bugs

• HiPath 3000: No Ringback tone when calling Upoe or HFA phone
• Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k)
• IP: Phone send ARP requests to IP: 192.1.1.49

V1.25

Fixed Bugs

• General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.

V1.24

What’s New?

• Support of DNS query SRV (DNS_SRV)
• Support DNS TTL
• Support RFC 3264 Hold for Broadsoft

Fixed Bugs

• General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
• General: Loud tone when call disconnected
• General: Calltransfer not possible after toggle between calls
• LAN: phone doesn’t register, if L2 QoS value is set
• LAN: VLAN ID can’t be reset to None
• HiPath 3000: Toggle between calls not possible
• HiPath 3000: Busy tone after attended Call transfer
• HiPath 3000: HP3k-HP3k trunking, no payload after transfer
• Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000

Known & Open Issues

• HiPath 3000: Blind (semi-attended) transfer doesn’t work
• Not possible to dial, after first call was made with Hook on
• Symmetric use of UDP ports (planned for V1.25)

V1.23

What’s New?

• Telnet port disabled
• Distinctive Ringing (Sylantro) supported