Views

Difference between revisions of "hipath cordless"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (hipath cordless v3.0)
 
(Redirecting to HiPath Cordless IP)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
Hallo,
+
#REDIRECT [[HiPath Cordless IP]]
i'm on hipath 4000 v4.2_1 and hotfix 42 , on the pbx there's an Slc24 q2193-x200 with the last loadware pzdslc25 cv373
 
the following error occoured:
 
with
 
res-dssuen,1-2-109-0;
 
the system deactive the base station bs4 on circuit 0 so with dis-slcb:bssc,data,2,109,0;
 
byte 12 &13 are 02 FF
 
ad insert the following comment:
 
 
 
RES-DSSU:PEN,1-2-109-0;
 
H500: AMO DSSU STARTED
 
H33: PEN 1-2-109-0 WAS ALREADY DEACTIVATED
 
H22: BASE STATION CAN BE LOADED ONLY BY MEANS OF
 
EXEC-DSSU:1,2,109;
 
 
 
but with the command exec-dssu:1,2,109; nothing happened
 
i have to use act-dssu:aul,pen,1-2-109-0;
 
the bs4 will be loaded correctly
 
 
 
if i use the command line step by step this is the scenario:
 
 
 
<ex-dssu:
 
LTG = 1
 
LTU = 2
 
SLOT = 109
 
CIR = 0
 
M34: VALUE NOT WITHIN ADMISSIBLE RANGE
 
CIR = ??
 
CIR : CIRCUIT NUMBER
 
CHARACTERISTIC : OPTIONAL
 
MINIMUM : 1 VALUES
 
MAXIMUM : 2 VALUES
 
VALUE LINKING : &&
 
VALUE TYPE : DECIMAL NUMBER
 
CONVERSION TYPE : BINARY NUMBER WITH 8 BITS
 
POSSIBLE VALUES : 8-23
 
CIR = ;
 
 
 
But from 8 to 23 were circuit for the base station for the cmi v2.3 standard
 
so i think it's a bug for the v4
 

Latest revision as of 12:35, 14 July 2009

Redirect to: