Views

Difference between revisions of "Your Assistance"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Common questions)
Line 23: Line 23:
 
However, no request at all seems weird. Do the other functions of the phone work? Is a proxy required in you network?
 
However, no request at all seems weird. Do the other functions of the phone work? Is a proxy required in you network?
 
--[[User:Harald.saller|harald]] 10:42, 1 September 2008 (CEST)
 
--[[User:Harald.saller|harald]] 10:42, 1 September 2008 (CEST)
 +
 +
 +
I am using the same configuration. When I try to start the WebcamViewer application the phone shows the following message:
 +
"Starting XML Application"
 +
but I have no traffic from the phone.
 +
The other basic functionalities (SIP calls) work fine.
 +
I have performed my test with two different Openstage 60 (same firmware), obtaining the same result. No proxy is required in my network. Do I need some further configurations to enable the XML applications on the phones?
 +
 +
Thanks,
 +
Alessandro
  
  

Revision as of 15:49, 1 September 2008

Your Assistance is wanted! Do you have any comments, just write it down here.

Please don't forget your signature if you want to tell us something.

Common questions

I would like to develop XML application for openstage 60. First of all my whish was to make my phones working with WebcamViewer (downloaded from the wiki page: http://wiki.siemens-enterprise.com/index.php/Example_XML_Applications_for_OpenStage) and with other applications like weather and RSSFeed, but I had this problem:

1. I configured the phone to work with the test server "87.106.21.36" as stated in the wiki but it seems that the OS60 cannot performs any request (from wireshark trace). Firmware is V1 R3.7.0 SIP 080215 (tested both Weather and WebcamViewer and the others RSSFeed etc.).


Could someone please give me some help? Thanks Alessandro

I just tested it using the same firmware. Please confer the screenshot:
WebcamViewer-parameters.gif


Can you upload a screenshot of your configuration?

However, no request at all seems weird. Do the other functions of the phone work? Is a proxy required in you network? --harald 10:42, 1 September 2008 (CEST)


I am using the same configuration. When I try to start the WebcamViewer application the phone shows the following message: "Starting XML Application" but I have no traffic from the phone. The other basic functionalities (SIP calls) work fine. I have performed my test with two different Openstage 60 (same firmware), obtaining the same result. No proxy is required in my network. Do I need some further configurations to enable the XML applications on the phones?

Thanks, Alessandro



i am using Hipath 3550 and i wants to record our welcom message on the system. we have a recorded mp3 file. how it possibel to transfer mp3 file into the hipath sytem --Manoj 13:27, 4 August 2008 (CEST)


Hi. i have bought a optipoint wl2 by ebay. I would like to upgrade the firmware but I cannot find them. Where can I download a new Firmware? I thought the firmware stand under gpl. Best regard André

You can get a software update only by a certified SEN partner. If your deal was a privat bargain, try to connect your seller. Maybe he has contact to an authorized partner. Amongst others the software consists of gpl parts. This parts are mentioned in the enclosed manual. --Horemu 12:13, 8 April 2008 (CEST)

Hi,

I bought from my reseller in Italy two openstage 20 and an openstage 40, shipped with firmware V1 R2.2.63 SIP 070629 and V0 R7.8.135 SIP 070312. I would like to upgrade the firmware: I followed the indication provided here but, neither my distributor nor Siemens here in Italy are able to provide me with the the newer version. Could you please give an answer?

Best regards Alessandro

Hi Alessandro, your distributor or your local Siemens contact must have access to the Siemens SWS (Software Server). The server provides the required software for free. For Italy the available software versions are:
Openstage 20 SIP: V1 R3.7.0, V30152-P1299-A100-33
Openstage 40 SIP: V1 R3.7.0, V30152-P1299-A200-33
--Horemu 14:51, 3 April 2008 (CEST)

HiPath OpenOffice ME

The technical specification says the system needs about 250W. This is the maximum power of the internal power supply. The system needs typically 60W.

Regards K. Leuschner


Support and Firmware Upgrade Policy of Siemens

Hi,

We were unfortunate enough to purchase a siemens hipath 2030 PBX from a European online retailer, believing that the system is like any other PBX/VOIP vendor's system, in the sense that it can be easily configured by the user and that firmware and software upgrades would be a common and easy process like the service other system providers offer to their customers. Unfortunately we have found out the hard way that not only the basic web user interface does not provide for many of the configuration parameters of the advertised capabilities of the system, but furthermore it is impossible to upgrade the system and ip-phones firmware since access to the appropriate download site is not granted for free.

In this regard we have to resolve to hire external siemens certified technicians that charge an arm and a leg for the simplest work to be done, defying the whole initial idea of isntalling a PBX system from a reputable provider that it will not cost a fortune to parametrise and maintain. Furthemore, we have found that the local (Greece) support from Siemens is non-existing, denying us any kind of support, and even refusing to supply us with the name of a certified technical contact that can help us, on the basis that we have not purchased the PBX system from Greece, but rather from another european country. (like we live on Mars and not in the European Union)

So we are stuck with a PBX system that we cannot parametrise to our liking, we cannot upgrade its firmware and software, we are denied of any support from the local siemens offices, and the only available option is to dump it since it is going to cost us more money in external help induced costs that we have budgeted for. It appears that contrary to other vendors siemens policy is not accomodating or helpful in any way to the needs of cost sensitive small businesses, and the only solution available to us would be to turn to an open platform system like asterisk.

So, before we decide to throw our money away, do you plan to offer any kind of support to small company users like us that do not want to spend an arm and a leg on fees for external consultants certified by Siemens? Can we have access to your propriatery software to parametrise our system to our liking? Can we get access to your firmaware upgrade site? A response will be very much appreciated.

Comments to files provided in this Wiki

You can use a template for your comments.

File name Admin Manual HiPath Deployment Service Tool info
Comment Please remove the file and replace it by a link to DLS (Online documentation is now provided there)
Signature --Stefan Beck
Status Fixed
File name Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment section 3.3.2.6 gw-default results in "Item="gw-default", status="not supported"
Signature --Christian.kaehler 21:42, 11 February 2007 (CET)
Status Open
File name Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment There is no explanation given for the error log - it is almost self explaining, but there should be an indication that this debug feature is available, especially in case you provide config files manually created
Signature --Christian.kaehler 13:23, 11 February 2007 (CET)
Status Open
File name Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment Section 3.2.2.1: The tag for the static IP address is not <Item name="ipadddr">, but "ipaddress"
Signature Christian.kaehler 13:07, 11 February 2007 (CET)--Christian.kaehler 20:57, 5 November 2006 (CET)
Status Fixed
File name User_Manual_optiPoint_410-420_advance_S.pdf info
Comment Section Appendix/User menu: The factory defaults are partly incorrect, e.g.39=DSM call view, 47=Call Park pickup?, 50=Callback-busy? and missing for 55=Call Recording
Signature --Christian.kaehler 11:14, 5 February 2007 (CET)
Status Open
File name Admin_Manual_XML-Management_optiPoint_410-420_V6.0.pdf info
Comment Section 3.3.6.6: The tag for the application file name is not <Item name="ftp-app-file">, but "dl-ftp-firmware-filename"
Signature --Christian.kaehler 20:57, 5 November 2006 (CET)
Status Fixed

Suggestions

Is it possible to add a section for the Siemens Wireless?

It would be very useful to have the AP30 and AP40 initially - then add on the Access Controllers and access points too.