Views

Difference between revisions of "VLAN ID Discovery over DHCP"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(VLAN Discovery)
 
(40 intermediate revisions by 7 users not shown)
Line 1: Line 1:
<div class="breadcrumb">
+
{{Breadcrumb|0|0|{{dev-en}}|OpenScape Desk Phone CP}}
{{up}} [[How To]]
+
 
</div>
 
 
With the introduction of the feature '''VLAN ID Discovery''' the following changes have to be made, if you want to use this feature on [[DHCP]].  
 
With the introduction of the feature '''VLAN ID Discovery''' the following changes have to be made, if you want to use this feature on [[DHCP]].  
  
Line 40: Line 39:
  
 
== VLAN Discovery ==
 
== VLAN Discovery ==
The feature VLAN ID Discovery allows optiPoint phones to automatically determine the Voice VLAN using DHCP. This is accomplished by the standard DHCP Option 43, Vendor Specific Info. After the Voice VLAN ID is acquired, the phone will then use 802.1Q tagging to connect to this VLAN. Siemens optiPoint phones use DHCP by default to determine the Voice VLAN. This way, a phone set to the factory default settings should start up on the network with a DHCP delivered IP address and with the correctly configured Voice VLAN automatically straight out of the box. Because VLAN ID Discovery requires DHCP, it is not available when using a static IP address configuration on the phone.  
+
 
When an optiPoint phone has been configured to use DHCP for VLAN Discovery (the default setting), the following process occurs:
+
The feature '''VLAN ID Discovery''' allows optiPoint, OpenStage, Desk Phone IP and Desk Phone CP phones to automatically determine the Voice VLAN ID using DHCP. This is accomplished by the standard '''DHCP Option 43''', Vendor Specific Info.
# First the Application sends out a DHCP Discover message to find out if there is a DHCP server available.  
+
 
# If the DHCP server sends a DHCP Offer back with the Option 43 Vendor Specific Options in a special format, the phone will accept the Offer, send back the DHCP Request, and save the VLAN ID provided by the DHCP server in the Vendor Specific Options.  
+
After the Voice VLAN ID is acquired, the phone will then use 802.1Q tagging to connect to this VLAN. Unify phones use DHCP by default to determine the Voice VLAN. This way, a phone set to the factory default settings should start up on the network with a DHCP delivered IP address and with the correctly configured Voice VLAN automatically straight out of the box.
# After the DHCP server has send the ACK message to the phone, the phone will release the leased IP address and start a new DHCP Discover cycle using the now known Voice
+
 
VLAN ID tagging. (In the second DHCP Discover cycle the vendor specific option is not needed any more: the DHCP server should configure option 43 Voice VLAN information only in the data VLAN scope, but not in the Voice VLAN Scope.)
+
Because VLAN ID Discovery requires DHCP, it is not available when using a static IP address configuration on the phone. When an Unify phone has been configured to use DHCP for VLAN Discovery (the default setting), the following process occurs:
 +
 
 +
* First the Application sends out a DHCP Discover message to find out if there is a DHCP server available.  
 +
* If the DHCP server sends a DHCP Offer back with the Option 43 Vendor Specific Options in a special format, the phone will accept the Offer, send back the DHCP Request, and save the VLAN ID provided by the DHCP server in the Vendor Specific Options.  
 +
* After the DHCP server has send the ACK message to the phone, the phone will release the leased IP address and start a new DHCP Discover cycle using the now known Voice VLAN ID tagging. (In the second DHCP Discover cycle the vendor specific option is not needed any more: the DHCP server should configure option 43 Voice VLAN information only in the data VLAN scope, but not in the Voice VLAN Scope.)
  
 
After this process the phone will send all frames with a 802.1Q VLAN tag with the VLAN ID learned from the process above and will attempt to contact the HiPath Gateway.
 
After this process the phone will send all frames with a 802.1Q VLAN tag with the VLAN ID learned from the process above and will attempt to contact the HiPath Gateway.
Line 53: Line 56:
 
* Set VLAN Discovery method to '''DHCP'''
 
* Set VLAN Discovery method to '''DHCP'''
  
== Example configuration for Option 43 ==
+
=== DHCP Option 43 tags ===
  
* Untagged Subnet is ''192.1.22.0'' and tagged (with [[VLAN]] ID 20) it is ''10.1.22.0''.
+
When IP phone is booting, it first obtains an IP address from '''Native VLAN''' via DHCP! Data VLAN is often used as '''Data VLAN''' that is also used by customer's computing device. Afterwards, IP phone reboots again with values given by '''vendor specific DHCP option''' (Otion 43). Option 43 gives you the ability to transmit configuration data to phine during phone's boot sequence. Often customer's phones are using a separate '''Voice VLAN''' for signaling and voice stream.
* The optiPoint 420 should get the VLAN ID 20 via VLAN Discovery.
 
  
Please make sure that the untagged packets of the first DHCP Discover cycle reach the DHCP server that provides the vendor specific options for the optiPoint. Most likely you will have to use Relay Agents/DHCP Helper.  
+
DHCP vendor specific option 43 specifies Voice '''VLAN ID''' and URL of '''DLS server'''. Siemens IP phones will recognize vendor specific options only, if vendor string (here: "Siemens") matches correctly. All values are given in '''hexadecimal numbering format'''. Here is a detailed description of all DHCP option 43 bytes:
 +
 
 +
'''Tag''' '''Len''' '''Content (Example)'''
 +
01  07  '''5369656d656e73'''
 +
02  04  000000'''65'''
 +
03  1a  73646c703a2f2f3'''9'''3'''3'''2E3'''1'''3'''2'''3'''2'''2E3'''1'''3'''1'''3'''4'''2E3'''9'''3'''6'''3a3138343433
 +
ff
 +
 
 +
 
 +
There are three '''Tags''', each with an explicit length value. List if tags is delimited by a ending '''ff'''
 +
 
 +
* Tag 01 specifies the vendor (here: ''Siemens'')
 +
** Tag: '''01'''; Length: '''07'''; Value: '''Siemens'''
 +
* Tag 02 specifies VLAN ID of Voice VLAN (here: ''101'')
 +
** Tag: '''02'''; Length: '''04'''; Value: '''65''' (Hex)
 +
* Tag 03 specifies IP address of DLS-Server (here: ''93.122.114.96:18443'')
 +
** Tag: '''03'''; Length: '''1a'''; Value: '''sdlp://93.122.114.96:18443''' (Hex)
 +
* End of record
 +
** End: '''ff''' (Hex)
 +
 
 +
Use Tag '''04''' instead of Tag 03 if URL of DLS is given by name (DNS).<ref>See Deployment Service, Administration Manual</ref>
 +
 
 +
== Example configuration ==
 +
 
 +
=== Example configuration of an Cisco Switch ===
 +
 
 +
The following example is for a L3 Cisco Switch where Data and Voice VLANs are terminated. Assumptions:
 +
* Data VLAN ID: 0 (native VLAN)
 +
* Voice VLAN ID: 101 (hex 65)
 +
* DLS URL: sdlp://93.122.114.96:18443
 +
 
 +
<pre>!
 +
ip dhcp pool de-msr-Data
 +
  network 192.168.37.0 255.255.255.224
 +
  default-router 192.168.37.1
 +
  option 43 hex 0107.5369.656d.656e.7302.0400.0000.6503.1a73.646c.703a.2f2f.3933.2e31.3232.2e31.3134.2e39.363a.3138.3434.33ff
 +
!
 +
ip dhcp pool de-msr-Voice
 +
  network 192.168.37.64 255.255.255.224
 +
  default-router 192.168.37.65
 +
!</pre>
 +
 
 +
=== Example configuration for Option 43 ===
 +
 
 +
* Untagged Subnet is ''192.1.22.0'' and tagged (with [[VLAN]] ID 10) it is ''10.1.22.0''.
 +
* The Unify phone should get the VLAN ID 10 via VLAN Discovery.
 +
 
 +
Please make sure that the untagged packets of the first DHCP Discover cycle reach the DHCP server that provides the vendor specific options for the phone. Most likely you will have to use Relay Agents/DHCP Helper.  
  
 
The options for the 192.1.22.0 subnet have to contain the option 43.
 
The options for the 192.1.22.0 subnet have to contain the option 43.
Line 65: Line 114:
  
 
* Option Code for the first encapsulated option: '''01''' (always)
 
* Option Code for the first encapsulated option: '''01''' (always)
* Length of the first data field: '''0A''' (always 10 Byte)
+
* Length of the first data field: '''07''' (always 7 Byte)
* Encapsulated data for option code 1: '''53 69 65 6D 65 6E 73 00 00 00''' (always Siemens plus 3 Fill bytes)
+
* Encapsulated data for option code 1: '''53 69 65 6D 65 6E 73''' (always Siemens)
 
* Option Code for the second encapsulated option: '''02''' (always)
 
* Option Code for the second encapsulated option: '''02''' (always)
 
* Length of the first data field: '''04''' (always 4 Bytes)
 
* Length of the first data field: '''04''' (always 4 Bytes)
* Encapsulated data for option code 2 (VLAN ID): '''00 00 00 14''' (Example for VLAN ID 20)
+
* Encapsulated data for option code 2 (VLAN ID): '''00 00 00 0A''' (Example for VLAN ID 10)
* Ending with 5 Padding Bytes and the end option: '''00 00 00 00 00 FF''' (always)
 
  
 
If this data format for option 43 is not matching or not send by the DHCP server the phone will start with the manual configured VLAN ID, if Layer 2 QoS is enabled. If Layer 2 QoS is not enabled the phone will start without using a VLAN ID.
 
If this data format for option 43 is not matching or not send by the DHCP server the phone will start with the manual configured VLAN ID, if Layer 2 QoS is enabled. If Layer 2 QoS is not enabled the phone will start without using a VLAN ID.
  
[[Image:dhcp-option43.gif|left|thumb|300px|Values for option 43 using a German Windows 2000 DHCP server, as described in the configuration example.]]
+
[[Image:dhcp-option43-neu.png|300px|Values for option 43 using a German Windows 2000 DHCP server, as described in the configuration example.]]
  
 +
=== Example configuration for Vendor Classes ===
 +
 +
Untagged Subnet is 172.16.133.0 and tagged (with [[VLAN]] ID 200) it is 192.168.133.0.
 +
 +
The phone should get the VLAN ID 200 via VLAN Discovery.
 +
Please make sure that the untagged packets of the first DHCP Discover cycle reach the DHCP server that provides the vendor specific options for the phone. Most likely you will have to use Relay Agents/DHCP Helper.
 +
 +
The options for the 172.16.133.0 subnet have to contain
 +
* vendor class '''OptiPoint''' (ASCII Value '''OptiPoint''') with option 1 & 2 for OptiPoint 410/420
 +
* vendor class '''OptiIpPhone''' (ASCII Value '''OptiIpPhone''') with option 1 & 2 for OpenStage, Desk Phone IP and Desk Phone CP
 +
 +
The data format of the vendor classes is following:
 +
 +
* Option Code 01: String            '''Siemens'''
 +
* Option Code 02: ByteArray 4 Bytes: '''00 00 00 c8''' (Example for VLAN ID 200)
 +
 +
If this data format for option 43 is not matching or not send by the DHCP server the phone will start with the manual configured VLAN ID, if Layer 2 QoS is enabled. If Layer 2 QoS is not enabled the phone will start without using a VLAN ID.
 +
 +
For DLS Use the options for the 192.168.133.0 tagged VLAN subnet have to contain
 +
* vendor class '''OptiIpPhone''' option 1 & 3 for OpenStage, Desk Phone IP and Desk Phone CP
 +
* Option Code 01: String  '''Siemens'''
 +
* Option Code 03: String  '''sdlp://172.16.180.211:18443''' (DLS IP Address)
 +
It must be possible to connect from the VLAN 200 to the DLS Server.
 +
 +
<gallery mode="traditional">
 +
Image:Vendorclass-DHCP-Option2.jpg
 +
Image:Vendorclass-DHCP-Option3.jpg
 +
</gallery>
 +
 +
 +
To do the above automatically, execute it at your Windows 2008 R2 DHCP Server.
 +
<pre>
 +
netsh Dhcp Server Add Class "OptiIpPhone" "Unify OptiIpPhone VoIP Options" 4f707469497050686f6e65 1 b
 +
 +
netsh Dhcp Server Add Optiondef 1 "HardwareCode" STRING 0 vendor="OptiIpPhone" comment="Siemens" Siemens
 +
 +
netsh Dhcp Server Add Optiondef 2 "VLAN ID" BYTE 1 vendor="OptiIpPhone" comment="VoIP VLAN ID" 0 0 0 c8
 +
 +
netsh Dhcp Server Add Optiondef 3 "DLS Server" STRING 0 vendor="OptiIpPhone" comment="DLS Server" sdlp://172.16.180.211:18443
 +
 +
</pre>
  
=== Example configuration for Vendor Classes ===
 
  
* In this Example VLAN 200 (0xc8) is set
+
Additional Screenshots on english Windows Server 2003 R2 with VLAN ID 504:
* The "OptiPoint" vendor class with option 2 for VLAN does only worh with OptiPoint 410/420
 
* To set this for OpenStage devices use the "OptiIpPhone" vendor class 2 for VLAN
 
* Option must set as Byte Array with 4 bytes
 
  
[[Image:Vendorclass-DHCP-Option2.jpg|left|thumb|300px|Values for Vendor Classes using a German Windows 2003 R2 DHCP server, as described in the configuration example.]]
+
<gallery mode="traditional">
 +
Image:DHCP_Vendor_Class_OptiPoint_Code01.PNG
 +
Image:DHCP_Vendor_Class_OptiPoint_Code02.PNG
 +
Image:DHCP_Vendor_Class_OptiPoint.PNG
 +
Image:DHCP_Vendor_Class_Scope.PNG
 +
</gallery>
  
 +
== References ==
 +
<references/>
  
 
[[Category:Configuration]]
 
[[Category:Configuration]]

Latest revision as of 08:49, 16 January 2024

With the introduction of the feature VLAN ID Discovery the following changes have to be made, if you want to use this feature on DHCP.

General

Reason for having a Voice VLAN

There are several potential advantages to place VoIP equipment in other VLAN than the data equipment:

  • Broadcast confinement? Yes! Early VoIP equipment implementations had been very sensitive to CPU power needed to process received broadcasts. On the other side, data equipment has sent many broadcast, so it was a good idea to place VoIP equipment in an other broadcast domain.

Note, that VoIP equipment has been improved a lot since then.

  • Quality of Service? Not really! There are two aspects of using Voice VLANs with respect to QoS:
    • 802.1Q VLAN tags have a three bit field defined in IEEE 802.1p, the VoIP equipment can use to indicate the priority of sent frames. See Quality of Service. However, the same can be accomplished when using 802.1Q VLAN tags with VLAN ID = 0, which is mapped to the port VLAN ID at the next-hop adjacent Layer 2 switch. Note, that modern network equipment is capable to use Layer 3 information instead in order to classify the priority of packets.
    • Network equipment could also use the value of the VLAN ID in order to classify packets. However, a classification based on the 802.1p CoS value or even better based on the DSCP-value is preferred over this method.
  • Security? Not really! Security is improved only marginally through the extra effort an intruder has to find out the Voice VLAN of a port and to connect to the VLAN. Improved packet filter mechanisms might be an argument, though.

Even if Broadcast confinement is not such a pressing issue any more, customers have got used to the concept of separate Voice VLANs.

Voice VLAN Design

In order to minimize Spanning Tree issues, the same design rules usualy applied to data VLANs also applies to Voice VLANs:
Keep VLANs localized and use redundant Layer 2 paths only, if there is a good reason for this.

As an example, here a picture with two possible VLAN designs:

Voice VLAN Design.jpg

It is not recommended to extend the Voice VLAN over large networks. Large Layer 2 topologies and the Spanning Tree Protocol needed in such an environment in order to block redundant paths, is prone to errors and those are a challenge to troubleshoot. Also note, that a Spanning Tree problem often leads to the whole network to be down and network equipment is not accessible for troubleshooting any more.

A good design avoids Layer 2 redundant paths. In a pure Layer 3 design like above, run Spanning Tree only as a measure to minimize the impact of erroneous cabling.

Note, that DHCP-based Voice VLAN Discovery relies on an unambigous mapping between Data Subnet and Voice VLAN. With a VLAN design like shown below, this rule is fulfilled (it is also fulfilled, if you use the same Voice VLAN for two or three Data VLANs, but this most probably will break the design rule, not to extend VLANs over large networks).

Associated Voice VLAN Design.jpg

Recommended Voice VLAN Design: Voice VLAN topology matches the data VLAN topology.

VLAN Discovery

The feature VLAN ID Discovery allows optiPoint, OpenStage, Desk Phone IP and Desk Phone CP phones to automatically determine the Voice VLAN ID using DHCP. This is accomplished by the standard DHCP Option 43, Vendor Specific Info.

After the Voice VLAN ID is acquired, the phone will then use 802.1Q tagging to connect to this VLAN. Unify phones use DHCP by default to determine the Voice VLAN. This way, a phone set to the factory default settings should start up on the network with a DHCP delivered IP address and with the correctly configured Voice VLAN automatically straight out of the box.

Because VLAN ID Discovery requires DHCP, it is not available when using a static IP address configuration on the phone. When an Unify phone has been configured to use DHCP for VLAN Discovery (the default setting), the following process occurs:

  • First the Application sends out a DHCP Discover message to find out if there is a DHCP server available.
  • If the DHCP server sends a DHCP Offer back with the Option 43 Vendor Specific Options in a special format, the phone will accept the Offer, send back the DHCP Request, and save the VLAN ID provided by the DHCP server in the Vendor Specific Options.
  • After the DHCP server has send the ACK message to the phone, the phone will release the leased IP address and start a new DHCP Discover cycle using the now known Voice VLAN ID tagging. (In the second DHCP Discover cycle the vendor specific option is not needed any more: the DHCP server should configure option 43 Voice VLAN information only in the data VLAN scope, but not in the Voice VLAN Scope.)

After this process the phone will send all frames with a 802.1Q VLAN tag with the VLAN ID learned from the process above and will attempt to contact the HiPath Gateway.

Phone Settings

  • Use dynamic IP address assignment via DHCP (mandatory!).
  • Set VLAN Discovery method to DHCP

DHCP Option 43 tags

When IP phone is booting, it first obtains an IP address from Native VLAN via DHCP! Data VLAN is often used as Data VLAN that is also used by customer's computing device. Afterwards, IP phone reboots again with values given by vendor specific DHCP option (Otion 43). Option 43 gives you the ability to transmit configuration data to phine during phone's boot sequence. Often customer's phones are using a separate Voice VLAN for signaling and voice stream.

DHCP vendor specific option 43 specifies Voice VLAN ID and URL of DLS server. Siemens IP phones will recognize vendor specific options only, if vendor string (here: "Siemens") matches correctly. All values are given in hexadecimal numbering format. Here is a detailed description of all DHCP option 43 bytes:

Tag Len Content (Example)
01  07  5369656d656e73
02  04  00000065
03  1a  73646c703a2f2f39332E3132322E3131342E39363a3138343433
ff


There are three Tags, each with an explicit length value. List if tags is delimited by a ending ff

  • Tag 01 specifies the vendor (here: Siemens)
    • Tag: 01; Length: 07; Value: Siemens
  • Tag 02 specifies VLAN ID of Voice VLAN (here: 101)
    • Tag: 02; Length: 04; Value: 65 (Hex)
  • Tag 03 specifies IP address of DLS-Server (here: 93.122.114.96:18443)
    • Tag: 03; Length: 1a; Value: sdlp://93.122.114.96:18443 (Hex)
  • End of record
    • End: ff (Hex)

Use Tag 04 instead of Tag 03 if URL of DLS is given by name (DNS).[1]

Example configuration

Example configuration of an Cisco Switch

The following example is for a L3 Cisco Switch where Data and Voice VLANs are terminated. Assumptions:

  • Data VLAN ID: 0 (native VLAN)
  • Voice VLAN ID: 101 (hex 65)
  • DLS URL: sdlp://93.122.114.96:18443
!
ip dhcp pool de-msr-Data
   network 192.168.37.0 255.255.255.224
   default-router 192.168.37.1
   option 43 hex 0107.5369.656d.656e.7302.0400.0000.6503.1a73.646c.703a.2f2f.3933.2e31.3232.2e31.3134.2e39.363a.3138.3434.33ff
!
ip dhcp pool de-msr-Voice
   network 192.168.37.64 255.255.255.224
   default-router 192.168.37.65
!

Example configuration for Option 43

  • Untagged Subnet is 192.1.22.0 and tagged (with VLAN ID 10) it is 10.1.22.0.
  • The Unify phone should get the VLAN ID 10 via VLAN Discovery.

Please make sure that the untagged packets of the first DHCP Discover cycle reach the DHCP server that provides the vendor specific options for the phone. Most likely you will have to use Relay Agents/DHCP Helper.

The options for the 192.1.22.0 subnet have to contain the option 43.

The data format of the option 43 is following:

  • Option Code for the first encapsulated option: 01 (always)
  • Length of the first data field: 07 (always 7 Byte)
  • Encapsulated data for option code 1: 53 69 65 6D 65 6E 73 (always Siemens)
  • Option Code for the second encapsulated option: 02 (always)
  • Length of the first data field: 04 (always 4 Bytes)
  • Encapsulated data for option code 2 (VLAN ID): 00 00 00 0A (Example for VLAN ID 10)

If this data format for option 43 is not matching or not send by the DHCP server the phone will start with the manual configured VLAN ID, if Layer 2 QoS is enabled. If Layer 2 QoS is not enabled the phone will start without using a VLAN ID.

Values for option 43 using a German Windows 2000 DHCP server, as described in the configuration example.

Example configuration for Vendor Classes

Untagged Subnet is 172.16.133.0 and tagged (with VLAN ID 200) it is 192.168.133.0.

The phone should get the VLAN ID 200 via VLAN Discovery. Please make sure that the untagged packets of the first DHCP Discover cycle reach the DHCP server that provides the vendor specific options for the phone. Most likely you will have to use Relay Agents/DHCP Helper.

The options for the 172.16.133.0 subnet have to contain

  • vendor class OptiPoint (ASCII Value OptiPoint) with option 1 & 2 for OptiPoint 410/420
  • vendor class OptiIpPhone (ASCII Value OptiIpPhone) with option 1 & 2 for OpenStage, Desk Phone IP and Desk Phone CP

The data format of the vendor classes is following:

  • Option Code 01: String Siemens
  • Option Code 02: ByteArray 4 Bytes: 00 00 00 c8 (Example for VLAN ID 200)

If this data format for option 43 is not matching or not send by the DHCP server the phone will start with the manual configured VLAN ID, if Layer 2 QoS is enabled. If Layer 2 QoS is not enabled the phone will start without using a VLAN ID.

For DLS Use the options for the 192.168.133.0 tagged VLAN subnet have to contain

  • vendor class OptiIpPhone option 1 & 3 for OpenStage, Desk Phone IP and Desk Phone CP
  • Option Code 01: String Siemens
  • Option Code 03: String sdlp://172.16.180.211:18443 (DLS IP Address)

It must be possible to connect from the VLAN 200 to the DLS Server.


To do the above automatically, execute it at your Windows 2008 R2 DHCP Server.

 
netsh Dhcp Server Add Class "OptiIpPhone" "Unify OptiIpPhone VoIP Options" 4f707469497050686f6e65 1 b

netsh Dhcp Server Add Optiondef 1 "HardwareCode" STRING 0 vendor="OptiIpPhone" comment="Siemens" Siemens

netsh Dhcp Server Add Optiondef 2 "VLAN ID" BYTE 1 vendor="OptiIpPhone" comment="VoIP VLAN ID" 0 0 0 c8

netsh Dhcp Server Add Optiondef 3 "DLS Server" STRING 0 vendor="OptiIpPhone" comment="DLS Server" sdlp://172.16.180.211:18443


Additional Screenshots on english Windows Server 2003 R2 with VLAN ID 504:

References

  1. See Deployment Service, Administration Manual