Views

Difference between revisions of "OpenScape CP600 Feature Example Videos ENG"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(V1 R1)
Line 1: Line 1:
 
CP600 SIP Feature example Videos <br>
 
CP600 SIP Feature example Videos <br>
  
== ''' Kurz Videos (max. 60 Sekunden) ''' ==
+
== ''' Short videos (max 60 seconds) ''' ==
You can press the "Expand" button to show Example Scenario + corresponding Video
+
By pressing the "Expand" button, you will be presented with a sample scenario + video.
 
=== ''' V1 R1 ''' ===
 
=== ''' V1 R1 ''' ===
 +
<div class="toccolours mw-collapsible mw-collapsed">
  
 
+
==== '''Conversation''' ====
<div class="toccolours mw-collapsible mw-collapsed">
+
Introduction of the new Innovative Conversation Concept. LDAP, Exchange, Call History are combined into a dynamic conversation. There is only one conversation per participant under which all relevant data are summarized
==== '''Bluetooth''' ====
 
With the help of the extended Bluetooth interface, it is possible to automatically lock the device as well as to unlock it. The signal strength of the Bluetooth device is measured for this purpose. If this value falls below a certain value which is configurable, the device is automatically disabled.
 
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 14: Line 13:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. paired Bluetooth device is visible
+
1. Idle Screen is visible
 
<br><br>
 
<br><br>
2. User switches to the bluetooth configuration menu
+
2. The conversation shows all contacts sorted by their last interaction. For a quick overview, the last interaction is displayed by means of a symbol as well as the corresponding text. (outgoing call, missed call etc..).
 
<br><br>
 
<br><br>
3. proximity Monitoring will be activated
+
3. The user can use the up and down button to navigate through the conversation
It is also possible to change the proximity Treshold
 
 
<br><br>
 
<br><br>
4. With a long press, the user gets to the top configuration option and saves the configuration's
+
4. A longpress jumps to the beginning or end of the list
 
<br><br>
 
<br><br>
5. User switches to the main menu screen (Bluetooth device is connected)
+
5. By pressing the right arrow key you can see more details. The last 3 interactions are displayed on the left side of the screen.
 
<br><br>
 
<br><br>
6. The user leaves his workstation with the headset and the device is automatically locked.
+
6. The "History" shows you the complete call history in a clear way.
 
<br><br>
 
<br><br>
7. The user returns and the device is automatically unlocked
+
7. the circle symbol indicate further information's (eg. call forwarding details). User can toggle the information via OK press.
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''Voraussetzung''': keine
+
'''requirement''': Canonical Config
 
</div>
 
</div>
 
</div>
 
</div>
Line 37: Line 35:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Circuit Mode''' ====
 
Easy switch between normal and circuit mode
 
  
<div class="mw-collapsible-content">
+
==== '''Bluetooth''' ====
{| class="noborder" style="float:center"
+
With the help of the extended Bluetooth interface, it is possible to automatically lock the device as well as to unlock it. The signal strength of the Bluetooth device is measured for this purpose. If this value falls below a certain value which is configurable, the device is automatically disabled.
| valign="middle" class="noborder" |
 
{{Info|
 
1. The conversation screen is displayed (Phone mode is active)
 
<br><br>
 
2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.
 
<br><br>
 
3. Pressing the OK key activates the circuit mode. The device now synchronizes itself automatically with the configured Server.
 
The circuit conversations are displayed.
 
The local conversations are no longer displayed in this mode.
 
<br><br>
 
4. Subsequently, the user returns to the telephone mode in the same way.
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
'''requirement''': Circuit
 
<br>'''Hint''': Local conversations are not more visible in circuit Mode
 
</div>
 
</div>
 
 
 
<div class="toccolours mw-collapsible mw-collapsed">
 
 
 
==== '''Conversation''' ====
 
Introduction of the new Innovative Conversation Concept. LDAP, Exchange, Call History are combined into a dynamic conversation. There is only one conversation per participant under which all relevant data are summarized
 
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 70: Line 43:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. Idle Screen is visible
+
1. paired Bluetooth device is visible
 
<br><br>
 
<br><br>
2. The conversation shows all contacts sorted by their last interaction. For a quick overview, the last interaction is displayed by means of a symbol as well as the corresponding text. (outgoing call, missed call etc..).
+
2. User switches to the bluetooth configuration menu
 
<br><br>
 
<br><br>
3. The user can use the up and down button to navigate through the conversation
+
3. proximity Monitoring will be activated
 +
It is also possible to change the proximity Treshold
 
<br><br>
 
<br><br>
4. A longpress jumps to the beginning or end of the list
+
4. With a long press, the user gets to the top configuration option and saves the configuration's
 
<br><br>
 
<br><br>
5. By pressing the right arrow key you can see more details. The last 3 interactions are displayed on the left side of the screen.
+
5. User switches to the main menu screen (Bluetooth device is connected)
 
<br><br>
 
<br><br>
6. The "History" shows you the complete call history in a clear way.
+
6. The user leaves his workstation with the headset and the device is automatically locked.
 
<br><br>
 
<br><br>
7. the circle symbol indicate further information's (eg. call forwarding details). User can toggle the information via OK press.
+
7. The user returns and the device is automatically unlocked
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Canonical Config
+
'''Voraussetzung''': keine
 
</div>
 
</div>
 
</div>
 
</div>
 +
 +
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
Line 157: Line 133:
 
</div>
 
</div>
 
</div>
 
</div>
 +
 +
 +
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''CP600 12 favorites''' ====
+
==== '''Intuitive search function''' ====
When the key-module is disconnected, the user is now able to configure up to 12 favorites.
+
The search function has been completely redesigned to give the user an intuitive and easy way to search for both local and corporate contacts at the same time. The local search results are displayed, followed by the company entries (LDAP)
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 167: Line 146:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. The idle screen of the phone is displayed, including favorites.
+
1. the last 4 conversations are displayed
 
<br><br>
 
<br><br>
2. Press the OK button to enter the user's favorite menu. All configured favorites are displayed here
+
2. The user selects the search field and starts the search (press OK button). In the local search, both the first and the last name are searched at the same time.
 
<br><br>
 
<br><br>
3. The user selects the favorite line and enters the configuration menu by pressing the OK key
+
3. Any input from the user restricts the results further.
 
<br><br>
 
<br><br>
4. In this menu it is possible to program up to 12 individual keys.
+
4. New conversations can be seen very well with the text "Start new conversation" as well as the missing interaction time.
<br><br>
 
5. By pressing the OK button, the user enters the configuration menu. Button 12 is used with "Forwarding all calls" function.
 
<br><br>
 
6. After successful configuration the user automatically reaches his current favorites
 
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': nothing
+
'''requirement''': Canonical Settings, LDAP
 
</div>
 
</div>
 
</div>
 
</div>
Line 187: Line 162:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Mark all conversations as read''' ====
+
==== '''Real time LDAP''' ====
Over 3 clicks, it is possible to Mark all conversations as read at the same time
+
Dialed / incoming phone numbers are automatically synchronized with the corporate directory.
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 194: Line 169:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. The idle screen of the device with 4 missed calls is displayed.
+
1. The example shows a completely empty conversation list
 +
<br><br>
 +
2. The user dials the previously unknown numbers 32117. The device automatically sends a request for these numbers to the company directory (LDAP). If a hit occurs, all relevant contact information is immediately updated.
 
<br><br>
 
<br><br>
2. The user switches to the conversation screen.
+
3. In this case, the contact picture is automatically downloaded from the configured LDAP server and displayed.
 
<br><br>
 
<br><br>
3. By selecting the conversation line and pressing the OK key, the user accesses the list options
+
4. After terminating the conversation, the contact is automatically stored locally by the device
 
<br><br>
 
<br><br>
4. The function "Mark missed calls as read" is selected.
+
5. By pressing the right arrow key, the user enters the local conversation details and can retrieve all existing corporate directory information.
Press the OK key to execute the function.
+
}}
 +
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 +
|}
 +
'''requirement''': Canonical Settings, LDAP
 +
</div>
 +
</div>
 +
 
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 
 +
==== '''Idle Screen''' ====
 +
After a configurable timeout, the device automatically displays the configured idle screen.
 +
 
 +
<div class="mw-collapsible-content">
 +
{| class="noborder" style="float:center"
 +
| valign="middle" class="noborder" |
 +
{{Info|
 +
1. Conversation screen is visible
 
<br><br>
 
<br><br>
5. The device automatically switches to the conversation screen and marks all conversations as read.
+
2 After the configured timeout, the device automatically switches to the configured idle screen.
 +
In this case, the idle screen is configured to "Menu screen"
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': nothing
+
'''requirement''': Idle Screen
 
</div>
 
</div>
 
</div>
 
</div>
Line 213: Line 207:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''NTP Backup''' ====
+
==== '''Landing Screen''' ====
If the device can not reach the configured NTP (time) server, a fault message is displayed on the display. In addition, it is possible to configure a backup NTP server.
+
The user can set the landing screen individually.
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 220: Line 214:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. The current NTP server can not be reached. Therefore, an error message is displayed for the user.
+
1. Settings menu is visible
 +
<br><br>
 +
2. the configuration menu can be accessed via the menu settings / Phone / Idle Screen
 +
<br><br>
 +
3. the user is given a selection list of the available landing screens by selecting and then pressing the OK button
 +
<br><br>
 +
4. after successful configuration the settings are stored (main menu)
 
<br><br>
 
<br><br>
2. From the Admin menu it is possible to configure a second (backup) NTP server (also via DLS and WBM)
+
5. the conversation screen is visible
 
<br><br>
 
<br><br>
3. The device contacts the newly configured time server (background process)
+
6. outgoing call to XX224
 
<br><br>
 
<br><br>
4. The second NTP server is reachable and transmits the current time. The error message for the user disappears.
+
7. after terminating the call, the device automatically switches to the configured landing screen
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Backup NTP
+
'''requirement''': Landing Screen
 
</div>
 
</div>
 
</div>
 
</div>
Line 236: Line 236:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Intuitive search function''' ====
+
==== '''Permanent LDAP Lookup''' ====
The search function has been completely redesigned to give the user an intuitive and easy way to search for both local and corporate contacts at the same time. The local search results are displayed, followed by the company entries (LDAP)
+
If activated, an LDAP request is also sent for existing contacts.
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 243: Line 243:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. the last 4 conversations are displayed
+
1. Conversation screen with local LDAP contacts is displayed
 
<br><br>
 
<br><br>
2. The user selects the search field and starts the search (press OK button). In the local search, both the first and the last name are searched at the same time.
+
2. User selects the conversation "Stefan Siewert" and starts an outgoing call (OK press)
 
<br><br>
 
<br><br>
3. Any input from the user restricts the results further.
+
3. The device sends an LDAP request to the server despite the existing contact information. If the server can resolve the LDAP contact, the existing contact is dynamically updated (in this case, the contact image is updated)
 
<br><br>
 
<br><br>
4. New conversations can be seen very well with the text "Start new conversation" as well as the missing interaction time.
+
4. After the call has ended, the device displays the conversations with the updated image
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Canonical Settings, LDAP
+
'''requirement''': LDAP, permanent LDAP, Canonical Settings
 
</div>
 
</div>
 
</div>
 
</div>
 +
 +
=== ''' V1 R2 ''' ===
  
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Real time LDAP''' ====
+
==== '''Circuit Mode''' ====
Dialed / incoming phone numbers are automatically synchronized with the corporate directory.
+
Easy switch between normal and circuit mode
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 266: Line 268:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. The example shows a completely empty conversation list
+
1. The conversation screen is displayed (Phone mode is active)
 
<br><br>
 
<br><br>
2. The user dials the previously unknown numbers 32117. The device automatically sends a request for these numbers to the company directory (LDAP). If a hit occurs, all relevant contact information is immediately updated.
+
2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.
 
<br><br>
 
<br><br>
3. In this case, the contact picture is automatically downloaded from the configured LDAP server and displayed.
+
3. Pressing the OK key activates the circuit mode. The device now synchronizes itself automatically with the configured Server.
 +
The circuit conversations are displayed.
 +
The local conversations are no longer displayed in this mode.
 
<br><br>
 
<br><br>
4. After terminating the conversation, the contact is automatically stored locally by the device
+
4. Subsequently, the user returns to the telephone mode in the same way.
<br><br>
 
5. By pressing the right arrow key, the user enters the local conversation details and can retrieve all existing corporate directory information.
 
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Canonical Settings, LDAP
+
'''requirement''': Circuit
 +
<br>'''Hint''': Local conversations are not more visible in circuit Mode
 
</div>
 
</div>
 
</div>
 
</div>
Line 284: Line 287:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Idle Screen''' ====
+
==== '''CP600 12 favorites''' ====
After a configurable timeout, the device automatically displays the configured idle screen.
+
When the key-module is disconnected, the user is now able to configure up to 12 favorites.
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 291: Line 294:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. Conversation screen is visible
+
1. The idle screen of the phone is displayed, including favorites.
 +
<br><br>
 +
2. Press the OK button to enter the user's favorite menu. All configured favorites are displayed here
 +
<br><br>
 +
3. The user selects the favorite line and enters the configuration menu by pressing the OK key
 +
<br><br>
 +
4. In this menu it is possible to program up to 12 individual keys.
 +
<br><br>
 +
5. By pressing the OK button, the user enters the configuration menu. Button 12 is used with "Forwarding all calls" function.
 
<br><br>
 
<br><br>
2 After the configured timeout, the device automatically switches to the configured idle screen.
+
6. After successful configuration the user automatically reaches his current favorites
In this case, the idle screen is configured to "Menu screen"
 
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Idle Screen
+
'''requirement''': nothing
 
</div>
 
</div>
 
</div>
 
</div>
Line 304: Line 314:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Landing Screen''' ====
+
==== '''Mark all conversations as read''' ====
The user can set the landing screen individually.
+
Over 3 clicks, it is possible to Mark all conversations as read at the same time
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 311: Line 321:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. Settings menu is visible
+
1. The idle screen of the device with 4 missed calls is displayed.
 
<br><br>
 
<br><br>
2. the configuration menu can be accessed via the menu settings / Phone / Idle Screen
+
2. The user switches to the conversation screen.
 
<br><br>
 
<br><br>
3. the user is given a selection list of the available landing screens by selecting and then pressing the OK button
+
3. By selecting the conversation line and pressing the OK key, the user accesses the list options
 
<br><br>
 
<br><br>
4. after successful configuration the settings are stored (main menu)
+
4. The function "Mark missed calls as read" is selected.
 +
Press the OK key to execute the function.
 
<br><br>
 
<br><br>
5. the conversation screen is visible
+
5. The device automatically switches to the conversation screen and marks all conversations as read.
<br><br>
 
6. outgoing call to XX224
 
<br><br>
 
7. after terminating the call, the device automatically switches to the configured landing screen
 
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': Landing Screen
+
'''requirement''': nothing
 
</div>
 
</div>
 
</div>
 
</div>
Line 333: Line 340:
 
<div class="toccolours mw-collapsible mw-collapsed">
 
<div class="toccolours mw-collapsible mw-collapsed">
  
==== '''Permanent LDAP Lookup''' ====
+
==== '''NTP Backup''' ====
If activated, an LDAP request is also sent for existing contacts.
+
If the device can not reach the configured NTP (time) server, a fault message is displayed on the display. In addition, it is possible to configure a backup NTP server.
  
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Line 340: Line 347:
 
| valign="middle" class="noborder" |
 
| valign="middle" class="noborder" |
 
{{Info|
 
{{Info|
1. Conversation screen with local LDAP contacts is displayed
+
1. The current NTP server can not be reached. Therefore, an error message is displayed for the user.
 
<br><br>
 
<br><br>
2. User selects the conversation "Stefan Siewert" and starts an outgoing call (OK press)
+
2. From the Admin menu it is possible to configure a second (backup) NTP server (also via DLS and WBM)
 
<br><br>
 
<br><br>
3. The device sends an LDAP request to the server despite the existing contact information. If the server can resolve the LDAP contact, the existing contact is dynamically updated (in this case, the contact image is updated)
+
3. The device contacts the newly configured time server (background process)
 
<br><br>
 
<br><br>
4. After the call has ended, the device displays the conversations with the updated image
+
4. The second NTP server is reachable and transmits the current time. The error message for the user disappears.
 
}}
 
}}
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
| valign="bottom" class="noborder" | [[File:CP600ConversationDE.gif]]
 
|}
 
|}
'''requirement''': LDAP, permanent LDAP, Canonical Settings
+
'''requirement''': Backup NTP
 
</div>
 
</div>
 
</div>
 
</div>
 
=== ''' V1 R2 ''' ===
 

Revision as of 12:57, 19 September 2017

CP600 SIP Feature example Videos

Short videos (max 60 seconds)

By pressing the "Expand" button, you will be presented with a sample scenario + video.

V1 R1

Conversation

Introduction of the new Innovative Conversation Concept. LDAP, Exchange, Call History are combined into a dynamic conversation. There is only one conversation per participant under which all relevant data are summarized

1. Idle Screen is visible

2. The conversation shows all contacts sorted by their last interaction. For a quick overview, the last interaction is displayed by means of a symbol as well as the corresponding text. (outgoing call, missed call etc..).

3. The user can use the up and down button to navigate through the conversation

4. A longpress jumps to the beginning or end of the list

5. By pressing the right arrow key you can see more details. The last 3 interactions are displayed on the left side of the screen.

6. The "History" shows you the complete call history in a clear way.

7. the circle symbol indicate further information's (eg. call forwarding details). User can toggle the information via OK press.

CP600ConversationDE.gif

requirement: Canonical Config


Bluetooth

With the help of the extended Bluetooth interface, it is possible to automatically lock the device as well as to unlock it. The signal strength of the Bluetooth device is measured for this purpose. If this value falls below a certain value which is configurable, the device is automatically disabled.

1. paired Bluetooth device is visible

2. User switches to the bluetooth configuration menu

3. proximity Monitoring will be activated It is also possible to change the proximity Treshold

4. With a long press, the user gets to the top configuration option and saves the configuration's

5. User switches to the main menu screen (Bluetooth device is connected)

6. The user leaves his workstation with the headset and the device is automatically locked.

7. The user returns and the device is automatically unlocked

CP600ConversationDE.gif

Voraussetzung: keine


Delete all Conversations

Over 3 clicks, it is possible to delete all conversations at the same time

1. The idle screen of the device is displayed.

2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.

3. The function "Delete all Conversations" is selected

4. If a user PW is set up, this must be entered

5. The Device automatically switches to the conversation screen. All conversations are deleted.

CP600ConversationDE.gif

requirement: nothing

Intuitive dial out

Already during the dialing the user is shown in the real time all phone numbers relevant conversations on the display. This saves time and simplifies the choice.

1. Idle Screen is visible

2. The user begins to dial the desired number. Immediately all the contacts are scanned in real time and displayed accordingly for the user. Each additional digits further restricts the search

3. the requested contact (XXX23) is displayed at the top position after the fourth digit

CP600ConversationDE.gif

requirement: nothing

Exchange

Automatic synchronization of the Exchange contacts (eg Microsoft Outlook) to the device. Thus, their contacts in the device are always up-do-date. Existing contacts are automatically supplemented by Exchange information.

1. Contact list with an unknown number (XX21913) is displayed

2. The details of the contact show only the phone number

3. Exchange synchronization starts and the conversation is dynamically updated

4. From the previously unknown number XX21913 becomes a complete entry with corresponding picture and contact information. The call history is, of course, not lost.

CP600ConversationDE.gif

requirement: nothing



Intuitive search function

The search function has been completely redesigned to give the user an intuitive and easy way to search for both local and corporate contacts at the same time. The local search results are displayed, followed by the company entries (LDAP)

1. the last 4 conversations are displayed

2. The user selects the search field and starts the search (press OK button). In the local search, both the first and the last name are searched at the same time.

3. Any input from the user restricts the results further.

4. New conversations can be seen very well with the text "Start new conversation" as well as the missing interaction time.

CP600ConversationDE.gif

requirement: Canonical Settings, LDAP

Real time LDAP

Dialed / incoming phone numbers are automatically synchronized with the corporate directory.

1. The example shows a completely empty conversation list

2. The user dials the previously unknown numbers 32117. The device automatically sends a request for these numbers to the company directory (LDAP). If a hit occurs, all relevant contact information is immediately updated.

3. In this case, the contact picture is automatically downloaded from the configured LDAP server and displayed.

4. After terminating the conversation, the contact is automatically stored locally by the device

5. By pressing the right arrow key, the user enters the local conversation details and can retrieve all existing corporate directory information.

CP600ConversationDE.gif

requirement: Canonical Settings, LDAP

Idle Screen

After a configurable timeout, the device automatically displays the configured idle screen.

1. Conversation screen is visible

2 After the configured timeout, the device automatically switches to the configured idle screen. In this case, the idle screen is configured to "Menu screen"

CP600ConversationDE.gif

requirement: Idle Screen

Landing Screen

The user can set the landing screen individually.

1. Settings menu is visible

2. the configuration menu can be accessed via the menu settings / Phone / Idle Screen

3. the user is given a selection list of the available landing screens by selecting and then pressing the OK button

4. after successful configuration the settings are stored (main menu)

5. the conversation screen is visible

6. outgoing call to XX224

7. after terminating the call, the device automatically switches to the configured landing screen

CP600ConversationDE.gif

requirement: Landing Screen

Permanent LDAP Lookup

If activated, an LDAP request is also sent for existing contacts.

1. Conversation screen with local LDAP contacts is displayed

2. User selects the conversation "Stefan Siewert" and starts an outgoing call (OK press)

3. The device sends an LDAP request to the server despite the existing contact information. If the server can resolve the LDAP contact, the existing contact is dynamically updated (in this case, the contact image is updated)

4. After the call has ended, the device displays the conversations with the updated image

CP600ConversationDE.gif

requirement: LDAP, permanent LDAP, Canonical Settings

V1 R2

Circuit Mode

Easy switch between normal and circuit mode

1. The conversation screen is displayed (Phone mode is active)

2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.

3. Pressing the OK key activates the circuit mode. The device now synchronizes itself automatically with the configured Server. The circuit conversations are displayed. The local conversations are no longer displayed in this mode.

4. Subsequently, the user returns to the telephone mode in the same way.

CP600ConversationDE.gif

requirement: Circuit
Hint: Local conversations are not more visible in circuit Mode

CP600 12 favorites

When the key-module is disconnected, the user is now able to configure up to 12 favorites.

1. The idle screen of the phone is displayed, including favorites.

2. Press the OK button to enter the user's favorite menu. All configured favorites are displayed here

3. The user selects the favorite line and enters the configuration menu by pressing the OK key

4. In this menu it is possible to program up to 12 individual keys.

5. By pressing the OK button, the user enters the configuration menu. Button 12 is used with "Forwarding all calls" function.

6. After successful configuration the user automatically reaches his current favorites

CP600ConversationDE.gif

requirement: nothing

Mark all conversations as read

Over 3 clicks, it is possible to Mark all conversations as read at the same time

1. The idle screen of the device with 4 missed calls is displayed.

2. The user switches to the conversation screen.

3. By selecting the conversation line and pressing the OK key, the user accesses the list options

4. The function "Mark missed calls as read" is selected. Press the OK key to execute the function.

5. The device automatically switches to the conversation screen and marks all conversations as read.

CP600ConversationDE.gif

requirement: nothing

NTP Backup

If the device can not reach the configured NTP (time) server, a fault message is displayed on the display. In addition, it is possible to configure a backup NTP server.

1. The current NTP server can not be reached. Therefore, an error message is displayed for the user.

2. From the Admin menu it is possible to configure a second (backup) NTP server (also via DLS and WBM)

3. The device contacts the newly configured time server (background process)

4. The second NTP server is reachable and transmits the current time. The error message for the user disappears.

CP600ConversationDE.gif

requirement: Backup NTP