Views

Collaboration with VoIP Providers

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 15:33, 22 November 2006 by Andrew Wild (talk | contribs)
Jump to: navigation, search

Collaboration with VoIP Providers is an important topic in the todays world of Voice/Data Communication over the Internet. The following information will give an overview of the supported VoiP providers in the different countries as well as additional considerations and hints to the connected platforms.


Overview

HiPath Platforms have been tested with a large number of Internet telephony providers that support SIP. At the moment, there are vast differences in the range of features supported, reachable networks, and service quality offered by the various providers. Occasionally configuration changes may occur that require adjustments to be made to the HiPath Platforms.

General Information by platform

HiPath BizIP

HiPath BizIP's main functions have been tested on a large number of Internet telephony providers that support SIP. At the moment, there are vast differences in the range of features supported, reachable networks, and service quality offered by the various providers. Occasionally configuration changes may occur that require adjustments to be made to HiPath BizIP parameters.

To use the built-in voice mail, the provider must support G.729 voice compression and for remote access to the answering machine, the provider must support tone dialing in accordance with RFC 2833.

HiPath 2000

Due to provider network availability, temporary disruptions in connections may occur. Please note the general terms and conditions of the SIP providers. If connections cannot be established via SIP, HiPath 2000 will create them via ISDN.

HiPath 2000 permits the connection of standalone systems to SIP providers:

  • An active SIP provider is supported by the system.
  • Up to 30 SIP user IDs (SIP Client User Accounts) can be set up.
  • There can be a maximum of four simultaneous connections to the SIP provider.
  • Both S0 connections and SIP connections are supported in parallel via the Internet.
  • Internet access: ADSL, SDSL

Network solutions (several HiPath 2000 or HiPath 2000 with HiPath 3000/HiPath 4000/ HiPath 5000, SMG) use S0 trunk access only. The simultaneous use of networking via CorNet IP and SIP provider connections is not supported.

System-related connection conditions HiPath 2000 must be connected directly to the DSL modem. This gives HiPath 2000 direct access to the Internet. It is not possible to operate external routers with firewall or NAT functionality between the HiPath 2000 and the Internet. The integrated firewall settings of the system (NAT) ensure the security for the customer network.

The following provider-dependent characteristics must be noted:

  • Special call numbers / emergency calls / faxes
  • Special call numbers (e.g. 0800, 0900, 0137) or analog fax/modem connections are not supported by all SIP providers.
    • Emergency call numbers (110, 112) are not supported since the local network cannot be clearly assigned when exiting into the public network. These connections must be implemented via S0 access and are generally provided in advance by the setup assistant.
  • Calling line identification
    The CLIP and CLIR features are implemented differently by the various providers. Limitations in the calling line identification may occur.
  • For connections that exit into the fixed/wireless network or come in from the fixed/wireless network:
    • Provider-internal connections (destination is busy/unregistered) Internal connections to a busy or unregistered user are generally correctly signaled.
    • Calls to other providers
      These calls are technically possible but the individual providers adapt the routing functions of their network to each particular business model. More information is available with the respective SIP provider.
  • Call data evaluation
    The SIP protocol records individual call data against time. The data can be evaluated using an external application such as Teledata Office.
  • DTMF transmission via IP
    DTMF characters are transmitted in the voice channel. Secure transmission requires the codec G.711 to the provider.
  • Fax transmissions
    Fax transmissions are not supported by every provider. It is recommended that the standard setting be used, i.e. fax transmissions via ISDN. HiPath 2000 permits fax transmissions for SIP provider connections via G.711 gateway channels. T.38 is not supported.

Tested VoIP providers by countries

HiPath platforms main functions have been tested with the following Internet telephony providers that support SIP.
(default = General access data is already available as default setting in the WBM)

Germany

VoIP Providers HiPath BizIP HiPath 2000 HiPath 3000
1&1 default default
AdvanceCall x
BlueSip x
Dusnet x
freenet.de default default
GMX default
Nikotel default
PepPhone x
Purtel x
SimplyConnect x
Sipgate default default
Sipnetworks.de x
SipSnip x
STRATO default
T-Online default default
WEB.DE default

Hungary

VoIP Providers HiPath BizIP HiPath 2000 HiPath 3000
Megafone x

Test for the HiPath BizIP are currently going to be conducted with Externet

United Kingdom

VoIP Providers HiPath BizIP HiPath 2000
SipGate x x
VoiceFlex x x

United States of America

VoIP Providers HiPath BizIP HiPath 2000 HiPath 3000
tbd.

Tests for the HiPath 2000 and HiPath 3000 are currently going to be conducted with Cbeyond and Verizon

Documentation

symb-docu.gif Documentation in further languages, software and other downloads can be found on
http://www.unify.com/Support.
Any comments to the files provided here?

Administration and service

Release Notes

Sales Channels

See also

External Links