optiPoint 410/420 S FAQ
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
TheoptiPoint 410/420 S FAQ provides answers to frequently asked question about the optiPoint SIP phone family optiPoint 410/420 S, structured into different topics.
General
The following comment should be fixed
| Show fixme list
Translation from German is in progress
Operating the optiPoint telephones
SIP Port settings
- In the administration section (local menue: 02=System / 07=SIP addresses or web admin: SIP environment / SIP addresses) I see two fields to provide SIP ports. How does the port setting work?
File:OptiPoint 410420 S V4 1 SIP Port Settings.jpg
This is showing the SIP port settings
If you provide port numbers in the fields adjacend to the address fiels, then...
- ...these values will specify the destination port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar or...
- ...the values are set equal to zero, then the default SIP port numbers will be used - or if DNS-SRV is used, the port numbers provided in DNS-SRV responses will apply.
- ...you may specify different SIP ports for registrar and server.
The field "SIP port" below denotes the sending port used on the phone side.
