Views

optiPoint 150 S Release Notes

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 07:00, 19 October 2006 by Mg5151 (talk | contribs) (→‎Fixed Bugs and new features since Version 1.22)
Jump to: navigation, search

The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S (Deutschland optiPoint 150 S).

V1.29 (still under validation)

What’s New?

  • Be able to disable *99 at Sylantro

Fixed Bugs

  • Wrong display message at Op150 after call transfer
  • No Fallback to Inband DTMF if RFC2833 configured but one partner does not support DTMF after RFC2833
  • Number not dialed when going Off Hook
  • Phone plays DTMF digits if called while dialing.
  • Providertest Web.de: No Registration with DNS Name for SIP Server


V1.28

What’s New?

Internal ID Cluster New feature Comment
N/A Sylantro Special call park feature for Sylantro V4.0 Fixed
N/A Sylantro Special call pick-up feature for Sylantro V4.0 Fixed
N/A Sylantro Distinctive ringing for Sylantro V4.0 Fixed

Fixed Bugs and new features since Version 1.22

  • Broadsoft: DHCP Trouble - phone couldn't obtain IP adress via DHCP shortly
  • Broadsoft: Should not perform SRV lookup if service domain IPv4 format
  • Broadsoft: Failover/failback mechanism
  • Broadsoft: Support RFC 3264 Hold for Broadsoft
  • IP: New default QoS L3 values (Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46))
  • HP3k: No Ringback tone when calling Upoe or HFA phone @ HP3k (complies now to RFC 3960 sect 3.2)
  • Admin: Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)Now neither WBM nor local admin can configure CF in this case
  • General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
  • Support of DNS query SRV (DNS_SRV)
  • Support DNS TTL
  • General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
  • General: Loud tone when call disconnected
  • General: Calltransfer not possible after toggle between calls
  • General: The "Port field" in the SIP settings should aleady have a default value 5060.
  • LAN: phone doesn’t register, if L2 QoS value is set
  • LAN: VLAN ID can’t be reset to None
  • HiPath 3000: Toggle between calls not possible
  • HiPath 3000: Busy tone after attended Call transfer
  • HiPath 3000: HP3k-HP3k trunking, no payload after transfer
  • Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
  • Telnet port disabled
  • Distinctive Ringing (Sylantro) supported

Known & Open Issues

  • HiPath 3000: Blind (semi-attended) transfer doesn’t work
  • Not possible to dial, after first call was made with Hook on
  • Symmetric use of UDP ports

V1.22

Fixed Bugs and new features:

  • VLAN ID can't be configured via Phone
  • Blind transfer does not work oh H8000
  • After factory reset it is still possible to log in as user defined in last saved configuration
  • Admin password is not reset after factory reset
  • Disable Telnet Access at the optiPoint 150
Retrieved from "http://wiki.unify.com/index.php?title=optiPoint_150_S_Release_Notes&oldid=9470"