myPortal for Outlook
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
|
You are here: |
 Home Unified Communications OpenScape Business myPortal for Outlook
|
|
You are here: |
Home Unified Communications myPortal for Outlook
|
myPortal for Outlook is the user portal integrated in Microsoft Outlook for accessing the unified communication functions of OpenScape Business. It is analogous to myPortal. With myPortal for Outlook, all the myPortal UC Suite features can be integrated seamlessly into Microsoft Office Outlook.Users thus have direct access to their personal voicemail and fax messages, can dial directly from their Outlook contacts and use them for scheduling phone conferences.
myPortal for Outlook SW is part of OpenScape Business and bound to the SW version of the communication platform.
The following description refers to OpenScape Business V3. Deviations within the feature set may occur for previous or subsequent versions of OpenScape Business
Contents
Overview
myPortal for Outlook seamlessly integrates all UC Suite functions of myPortal for Desktop in Microsoft Office Outlook. Therefore, for instance, every user has direct access to their personal voice and fax messages, can dial directly from their Outlook contacts, or use these contacts for planning telephone conferences.
The user interface of myPortal for Outlook consists of the myPortal for Outlook tool bar integrated in Microsoft Outlook, a separate or embedded window with the Favorites list and further windows and screen pops, depending on the situation. By default, the tool bar of myPortal for Outlook is located below the menu bar and the tool bar of Outlook (Outlook 2013,2016,2019).
Features
myPortal for Outlook provides the following features:
Common UC features
- Directories
- Favorites List
- Journal for calls
- Desktop Dialer
- Screen pops
- Presence status
- CallMe service with ONS (One Number Service)
- Status-based call forwarding
- Personal AutoAttendant
- Conferences
- Record calls
- Instant Messaging
- Voice and Fax messages
Specific features
- Initiate a call out of an Outlook Contact
- Create an Outlook Contact from the Sender of a Voice Message
- Send a Voice Message as an E-mail
- Send a Fax Message as an E-mail
Requirements
Telecommunication systems
Platform
- OpenScape Business V2 or higher
Supported Telephones
Phones which are supported by myPortal for Outlook depend on the respective communication platform.
OpenScape Business
- OpenScape DeskPhone CP100, 200, 400, 600/E
- OpenStage HFA/SIP
- OpenScape Desk Phone IP 35G/55G HFA/SIP
- OpenStage T
- OpenScape Personal Edition HFA/SIP
- OpenScape Business Cordless
- OpenScape Cordless IP V2
- OpenStage WL3
- OpenScape WLAN Phone WL4
- SIP phones from third parties that support 3PCC
- Analog telephone
PC Hardware
Within the following the minimum HW requirements are shown. However, it should be noted that the operating system, groupware and any additional software components in use in the customer environment may require considerably more powerful hardware.
Client PC
Windows Client PC
- 2 GHz CPU
- RAM: 2 GB (Microsoft Windows XP: 1 GB) (Microsoft Windows 2003 Server: 1 GB)
- 100 Mbps LAN
- XGA (1024x768) screen resolution, myPortal for Outlook: SVGA (800x600) screen resolution
Terminal Server
The number of installable clients depends on the server performance and on the amount of available memory. If the server is also being used for other applications, their memory requirements must also be taken into account.
PC software
Please note
Support for the UC Suite clients for Microsoft Windows XP and Microsoft Windows 2003 Server will end at the same time as the end of support for these products by Microsoft. The product will still be supported, but will no longer be tested in detail.
Desktop Operating Systems
Windows Client PCs
- Microsoft Windows 10
Terminal Server Operating Systems
- Microsoft Windows 2012, 2008 R2, 2008 and 2003 as Microsoft Terminal Server
- Microsoft Windows 2008 R2, 2008 and 2003 as Citrix XenApp 5.0 or 6.0 Server
Application Software
- Microsoft Office 2013 (32 bit and 64 bit)
- Microsoft Office 2010 (32 bit and 64 bit)
- Microsoft Office 2007 (32 bit)
- Microsoft Office 2003 (32 bit)
with installed .NET components for Outlook
- Microsoft .NET Framework >= 3.5 (Outlook 2003/2007)
- Microsoft. NET Framework >= 4.0 (Outlook 2010/2013)
Access to Microsoft Exchange Server (for Outlook contacts and appointments)
- Exchange 2013 (64 bit)
- Exchange 2010 (64 bit)
- Exchange 2007 (64 bit)
Internet Browser
myPortal for Desktop can be used in combination with the following web browsers:
- Microsoft Internet Explorer Version 10
- Mozilla Firefox Version 19 or later
Licenses
A license is required for each user, who wants to use myPortal for Outlook.
Functional Boundaries and Limitations
Functional boundaries and limitation, which have to be considered for specific environments are described within the sales information, of the communication platform. The sales information is available within the Partner Portalof Unify.
Documentation
User manual
The user manual can be downloaded from:
- Communication system via the Administration Portal
- Customer Support Portal of Unify within the Internet
- Partner Portal of Unify
Software Deployment
myPortal for Oulook is part of OpenScape Business / Office SW image.
The system administrator can download the installation files from the Download Center of the communication system and can provide them to the users afterward by appropriate means.
Licensing
A license is required for for every user for the operation of myPoprtal for desktop.
For more details about licenses and license handling see also the sales information of the specific communication platform, which is available within the Partner Portal of Unify
