optiPoint 150 S Release Notes

The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs and open issues for appropriate firmware versions of the optiPoint 150 S ( optiPoint 150 S).

Software versioning / naming

A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:

V x[.y] R m.f.h

in which field:

• x[.y] denotes the Major release level
• m denotes the Minor release level
• f denotes the Fix release level
• h denotes the Hotfix level

This naming convention scheme does not imply any naming requirements for file / files available.

More informations on the New Software Versioning scheme wiki page.

V1 R0.49.0

What’s New ?

• DNS SRV function for H8K

Fixed Bugs

ID	Cluster	Summary
		Error with Mute Key, if the other Party released at first

Known & Open Issues

ID	Summary	Workaround
Caft 404	The Time Format and Date Format are not changed according to country standard.	Manual configuration

Compliant Products

• HiPath 8000 V3.1 (HiPath 8000 V3.1 R2 PS23)
• HiPath 4000 V3.0 (Minor Release 6 or later)
• HiPath 3000 V6.0 (SMR 9 or later)
• HiPath 2000 V1.0 (SMR 9 or later)

V1 R0.48.0

Fixed Bugs

ID	Cluster	Summary
		DNS SRV function for HiPath 8000 added
		In a call forward no answer (phone) scenario, "diversion" field is missing from the 302 moved temporarily SIP message
		Wrong dial tone for italian country setting

Known & Open Issues

ID	Summary	Workaround
Caft 404	The Time Format and Date Format are not changed according to country standard.	Manual configuration

V1 R0.45.0

Fixed Bugs

ID	Cluster	Summary
CAFT 420		Freezing of phone stopped
CAFT 431		No signaling at OP150S after Incoming Invite (fragmented) (TCP Mode) HP8k V3.1 and OP4x0 V7 with Security only

Known & Open Issues

ID	Summary	Workaround
Caft 404	The Time Format and Date Format are not changed according to country standard.	Manual configuration

V1 R0.44.0

Fixed Bugs

ID	Cluster	Summary
N/A		TCP window size problem
CAFT 431		No signaling at OP150S after Incoming Invite (fragmented) (TCP Mode) HP8k V3.1 and OP4x0 V7 with Security only

Known & Open Issues

ID	Summary	Workaround
Caft 404	The Time Format and Date Format are not changed according to country standard.	Manual configuration

Following restrictions apply if the phone is connected to a HiPath 3k/2k system: 1.) The OP150S is not allowed to be a member in one or more of these groups: PUG, MULAP, Chese, SA, UCD 2.) The OP150S does not get a notification if a new voice message was recorded on the Voicebox. 3.) Calls can only be forwarded via the Call management of the HiPath system 4.) Activation of Call waiting does not work because of HiPath system restriction No Calls to PSTN subscriber if HiPath 3k/2k is connected via a SIP Provider to the PSTN network. This is a HiPath system error and will be connected in a next version. Following Restriction apply for usage in HiPath 8000 environment: 1.) DNS SRV is currently not supported in HP8000 server type profile.

V1 R0.43.0

What’s New ?

• Added portuguese display language

• Added 50 characters IDs

Fixed Bugs

ID	Cluster	Summary
		Support both UDP and TCP mode is required (UDP as standard mode, TCP as Backup mode).
CAFT 426		Register Expires not working
		phone does not send the ARP requests asking for MAC address of Subnet Gateway (TCP Mode)

Known & Open Issues

ID	Summary	Workaround
Caft 404	The Time Format and Date Format are not changed according to country standard.
Caft 431	No signaling at OP150S after Incoming Invite (fragmented) (TCP Mode) HP8k V3.1 and OP4x0 V7 with Security only

V1 R0.40.0

What’s New ?

The optiPoint 150 S V1.0 is now supported by:

• HiPath 2000 V1.0 R9 and later versions
• HiPath 3000 V6.0 R9 and later versions

Fixed Bugs

ID	Cluster	Summary
CAFT 426		Phone can't register to HiPath 8000 with TCP mode
CAFT 429		TCP: Phone is not sending Invite message with Digest Authentication

Known & Open Issues

ID	Summary	Workaround
CAFT 404	The Time Format and Date Format are not changed according to country standard	Perform a manual configuration

V1 R0.39.0

What’s New ?

ID	Cluster	Title	Summary
...	...	Addition of czech display language to optiPoint 150 S	...

Fixed Bugs

ID	Cluster	Summary
...	...	DNS value issue solved
...	...	Expires value for the first REGISTER after a reboot should be 0
...	...	Display Information
...	...	Registering to HiPath 8k with TCP mode
...	...	Added TCP keep alive function

V1 R0.33.0

What’s New ?

ID	Cluster	Title	Summary
...	...	Addition of French display language to optiPoint 150 S	...
...	...	Reboot the product immediately after application code download.	...

Fixed Bugs

ID	Cluster	Summary
...	...	Speechpath problem when calling OP150S from OP410/420S with Encryption enabled (HiPath 8k V3).

V1 R0.31.0

What’s New ?

ID	Cluster	Title	Summary
...	...	Allow alpha numeric phone number, phone name and user ID	...
...	...	Symmetric UDP Ports	...
...	...	Support DNS query SRV	...
...	...	Support DNS TTL	...
...	...	Support RFC3264 hold for Broadsoft	...

Fixed Bugs

ID	Cluster	Summary
...	...	Special characters like /, -, @ are now possible to be entered under SIP setup/ SIP settings in the Web based management.
...	...	No Fallback to Inband DTMF
...	...	Number not dialed when going offhook
...	...	Phone plays DTMF digits if called while dialing onhook
...	...	No Registration to SIP Server when DNS name is a canonicle name for an alias
...	...	No automatic callback if a semi-attanded transfer is initiated before Ringing
...	...	No Ringback tone when doing enquiry
...	...	Semi Attended TRansfer does not work on HiPath 2000 V1.0
...	...	DNS TTL does not work
...	...	Sylantro ID1.6 Inbound Call when Busy LCD display error
...	...	Sylantro ID3.6 Call-Waiting Interrupted LCD display error
...	...	Call log list always shows the oldest entry at first
...	...	Phone plays DTMF digits if called while dialing

Known & Open Issues

ID	Summary	Workaround
...	The Time Format and Date Format are not changed according to country standard	...
...	Be able to disable *99 at Sylantro	...

V1 R0.28.0

What’s New?

Internal ID	Cluster	New feature	Comment
N/A	Sylantro	Special call park feature for Sylantro V4.0	Fixed
N/A	Sylantro	Special call pick-up feature for Sylantro V4.0	Fixed
N/A	Sylantro	Distinctive ringing for Sylantro V4.0	Fixed

Fixed Bugs and new features since Version 1.22

• Broadsoft: DHCP Trouble - phone couldn't obtain IP adress via DHCP shortly
• Broadsoft: Should not perform SRV lookup if service domain IPv4 format
• Broadsoft: Failover/failback mechanism
• Broadsoft: Support RFC 3264 Hold for Broadsoft
• IP: New default QoS L3 values (Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
• Admin: Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)Now neither WBM nor local admin can configure CF in this case
• General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
• Support of DNS query SRV (DNS_SRV)
• General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
• General: Short loud tone when call disconnected (after hook-on for about 200 ms)
• General: Calltransfer not possible after toggle between calls
• General: The "Port field" in the SIP settings should aleady have a default value 5060.
• General: To stay conform with other Siemens phones the default Codec Settings of the OP150S should be changed to "G.711A > G.711U > G.72x"
• General: Not possible to dial after first call was made with Hook on.
• General: Telnet access to optiPoint 150 S
• LAN: phone doesn’t register, if L2 QoS value is set
• LAN: VLAN ID can’t be reset to None
• HiPath 3000: Toggle between calls not possible
• HiPath 3000: Do not disturb is not working
• HiPath 3000: No Ringback tone when calling Upoe or HFA phone @ HP3k (complies now to RFC 3960 sect 3.2)

• HiPath 3000: Busy tone after attended Call transfer
• HiPath 3000: HP3k-HP3k trunking, no payload after transfer
• Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
• Telnet port disabled
• Sylantro: Distinctive Ringing (Sylantro) supported

Known & Open Issues

• HiPath 3000: Blind (semi-attended) transfer doesn’t work
• Not possible to dial, after first call was made with Hook on
• Symmetric use of UDP ports

V1 R0.22.0

Fixed Bugs and new features:

• VLAN ID can't be configured via Phone
• Blind transfer does not work oh H8000
• After factory reset it is still possible to log in as user defined in last saved configuration
• Admin password is not reset after factory reset
• Disable Telnet Access at the optiPoint 150

See also

• optiPoint 150 S - the portal page of the telephone
• optiPoint 150 S FAQ - answers to frequently asked questions
• optiPoint 150 S interoperability matrix - comparative table of supported platform versions
• optiPoint 150 S Release Notes - information about new software features, corrected bugs, known issues
• optiPoint 150 S Platform Feature Support - lists about available features when connectiong certain SIP communication systems
• optiPoint 150 S Mass Deployment procedure - flowchart of the Mass Deployment procedure
• optiPoint 150 S overview of SIP IT Service Provider features list - overview of SIP IT Service Provider features (internal/external calls)
• optiPoint 150 S setup for SIP IT Service Provider - description how to setup the phone with several SIP IT Service Providers
• optiPoint 150 S upload of SIP IT Service Provider configuration file - instructions on how to upload preferred SIP IT Service Provider default configuration file
• optiPoint 150 S Software Upgrade Methodology - information about TFTP and HTTP upgrade scenarios