openSUSE 10.3 Installationshinweise
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Um Probleme während der OpenScape Office Server Installation mit openSUSE 10.3 zu vermeiden, beachten Sie bitte die nachfolgenden Informationen und Hinweise.
Contents
Getestete Netzwerk Adapter mit openSUSE 10.3
Netzwerk Adapter D-Link DFE-528TX
- Typ: DFE-528TX Fast Ethernet PCI
- Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
- Slot: 32 Bit PCI
- Hinweis: automatische Erkennung
Netzwerk Adapter D-Link DGE-528T
- Typ: DGE-528T Gigabit Ethernet PCI
- Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T, 1000 Base-T
- Slot: PCI 2.2
- Hinweis: automatische Erkennung
Netzwerk Adapter Netgear FA311 V2
- Typ: Netgear FA311v2 Fast Ethernet PCI
- Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
- Slot: PCI
- Hinweis: automatische Erkennung
Netzwerk Adapter Netgear GA311
- Typ: Netgear GA311 Fast Ethernet PCI
- Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
- Slot: PCI 2.2
- Hinweis: automatische Erkennung
Netzwerk Adapter Fujitsu Siemens Netlink
- Typ: Fujitsu Siemens Fast Ethernet PCI
- Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
- Slot: PCI E
- Hinweis: automatische Erkennung, S26361-F3067-L30
Getestete Server Hardware
Primergy TX150 S6
- openSUSE Linux 10.3: OK.
- SUSE Linux Enterprise Server 10 mit SP2: OK.
- Installation of OpenSUSE 10.3 on FS Primergy TX150 S6 has worked. No parameters for ACPI or AHCI had to be changed. To check the LAN interfaces a SSH connection was established to another server. This worked with the on board network card as well as an external network card. The installation was however only conducted with the OpenSUSE DVD and not with (Windows-) installations program, which was delivered with the server. The available RAID system (pre installed through earlier installation) was recongnised by the OpenSUSE installation, no changes to the partitioning where made.
Celsius W370
- openSUSE Linux 10.3: Restriction, onboard network card not recognised.
- SUSE Linux Enterprise Server 10 mit SP2: OK, onboard network card recognised after installation of Fujitsu drivers.
Dell Poweredge T105
- AMD Opteron 2.1 GHz, 1 GB RAM, 250 GB HD, DVD Drive
- openSUSE Linux 10.3: OK, Operating System has to be installed as 32 Bit variant.
- SUSE Linux Enterprise Server 10 mit SP2: OK, Operating System has to be installed as 32 Bit variant.
HP Proliant ML110 G5
- Xenon dualcore 2.13 GHz, 1 GB RAM, 250 GB HDD, DVD
- openSUSE Linux 10.3: OK, Operating System has to be installed as 32 Bit variant.
- SUSE Linux Enterprise Server 10 mit SP2: OK, Operating System has to be installed as 32 Bit variant.
Common installation hints
- openSUSE 10.3 has to be installed in 32 Bit Mode (F7-Key only available with dual DVD 32/64).
- Hard disc problems:
- Modern servers are today often delivered with S-ATA hard disc controllers. Some of those controllers are not supported by openSUSE 10.3. In case of problems with the hard disc recognition, the AHCI mode must be disabled in the server BIOS and the server has to be restarted. After this change the server runs in P-ATA compatible mode.
- Network adapter problems:
- Install a certified external network adapter (refer to list of tested adapters above).
- When experiencing general problems:
- Press the following Function keys after starting the installation from the openSUSE install disc:
- F3 key >> for Graphics Adapter = Text Mode
- F5 key >> for Kernel Mode AHCI = off
- Problem: openSuse CD is always started from CD Drive.
- In this example the hard disc setting is IDE Mode. The setting has to be changed from Native IDE to AHCI (S-ATA) in the server BIOS and the server has to be restarted.
- 275px
- Problem with Fujitsu TX 150 server:
- openSUSE 10.3 hangs up during installation. The following setting has to be changed and openSUSE installed again.
- 275px
