Views

optiPoint 410/420 S FAQ

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 06:07, 26 October 2006 by Horemu (talk | contribs)
Jump to: navigation, search

◄ FAQ | Deutschland  optiPoint 410/420 S FAQ

The optiPoint 410/420 S FAQ provides answers to frequently asked question about the optiPoint SIP phone family optiPoint 410/420 S, structured into different topics.

Telephone administration

Why there are several SIP port fields in the local menu and the administration WBM?

In the administration section (local menue: 02=System > 07=SIP addresses or WBM admin you see two kind of SIP port settings.
File:OptiPoint 410420 S V4 1 SIP Port Settings.jpg
SIP port settings sample on WBM
If you provide port numbers in the Port fields subsequent to the address fiels, then ...
  • these values will specify the destination port numbers for the SIP messages. This values need to be matched with the port settings on the server/registrar
  • the values are set equal to zero, then the default SIP port numbers will be used - or if DNS-SRV is used, the port numbers provided in DNS-SRV responses will apply
  • you may specify different SIP ports for registrar and server.
The field SIP port below denotes the sending port used on the phone side.
Retrieved from "http://wiki.unify.com/index.php?title=optiPoint_410/420_S_FAQ&oldid=10212"